with Purchase of Furnace & Air Conditioner
Cannot be combined with any other offers. Must present coupon at time of service. Not valid on previously completed work.
We are also the go-to service provider for HVAC repair and installation in Hudson, Wisconsin. Our technicians are trained to work on all types of heating and cooling systems.
If your HVAC system isn’t working as it should, our specialists can provide prompt and effective furnace repair services and heating repair for homeowners in the Hudson, WI area.If your system is not able to be fixed, our professionals also offer reputable furnace installation services and will help you choose a system with the correct capacity for your house. Regardless of the issue, our skilled technicians will help restore the distribution of warm air in your living space.
It is highly recommended that you keep your HVAC and plumbing systems well-maintained and inspected often. Ensuring that your HVAC and plumbing systems receive the servicing they need will help prevent costly repairs, help your systems last longer, and help them withstand the severe winters.
We provide our customers with maintenance plan options as well as a 12-month 100% parts and labor warranty on repairs and replacements. As a member of our Hurlburt Family Rewards Club, you can save on repairs and energy costs in addition to receiving priority service.
At Hurlburt, we know how important it is to keep your system protected all year round. We are proud to offer residential, commercial, and emergency HVAC and plumbing services to cover all of your plumbing, heating, and cooling needs.
To find out more about getting our Hudson heating air and plumbing services, contact us today. If you would like to read about other customer’s experiences with us, we invite you to check out our reviews below!
There are many ways to find plumbers, including looking through magazine or newspaper ads, getting referrals from friends, and searching the internet for local plumbers in your area. But how do you know what kind of service you’re going to get before you hire them?Here are a few tips on how to find a good-quality plumber:
Make sure they’re certified. Read their reviews. Check to make sure they have many years of experience. AtHurlburt, we’ve been delivering high-quality services since 1959. Our friendly technicians strive to give you the best customer service possible so that no matter what you need, you feel satisfied with our work. If you’d like to learn more about the many services we offer, give us a call today!
Typically, most people will spend anywhere from $5,000-$10,000 on HVAC system replacement, with the average cost for replacement being about $7,000. This covers both the cost of the system and the cost of labor. However, some of the more high-end systems can get up to $20,000, so the replacement costs will vary depending on what kind of systems you purchase.Hurlburt offers unparalleled HVAC services. No matter what you need, we’ll work hard to ensure that we get the job done to your satisfaction. To find out more about our HVAC system replacement services, call us today!
The cost for HVAC repairs depends heavily on what system needs fixing and what the problem with it is. The average cost to have your AC systems repaired is about $320, with the average range being anywhere from $125-$450. For furnace repair, the average cost can fall anywhere from $130-$450, with most people paying around $250-$300. However, these numbers can be considerably lower or higher depending on the extent of damage to the unit and any parts that need replacing.At Hurlburt, we offer expert services and we are available to take your call 24/7. No matter when your HVAC systems have problems, we can help get them back up and running in no time. Call us for more information on how we can help you today!
Hurlburt in Hudson, WI provides a full range of electrical services aimed at keeping your home’s electrical systems functioning optimally and safely. Their offerings include precise electrical repairs for immediate concerns and the installation of whole-home generators to keep your power running smoothly during blackouts. The company’s technicians are committed to delivering excellent service and dependability. They also specialize in electrical panel services, essential for keeping your home’s electrical core in top condition, preventing hazards, and boosting electrical efficiency. Whether it involves updating your existing panel to support new appliances or just making sure your system is up to safety codes, Hurlburt‘s professionals offer reassurance with each service interaction.
Our professional team offers comprehensive electrical installation services that can significantly improve the comfort and functionality of your home. Their services include the installation of new lighting, which can completely alter the feel of your rooms, and the addition of more electrical outlets to support an increasing number of gadgets. Hurlburt also offers ceiling fan installations to maintain comfortable temperatures and enhance energy efficiency. They are committed to performing every job with a focus on safety and precision, ensuring reliable and seamless electrical solutions.
In Wisconsin, Hurlburt provides expert duct cleaning services that aim to improve both the performance of your air conditioning and the air quality within your home. Accumulated dust, allergens, and debris in ductwork can hinder airflow and decrease your HVAC system’s efficiency over time. Utilizing Hurlburt’s services can ensure that your air conditioning system functions at its best, which can reduce energy costs and extend the system’s lifespan. Moreover, the removal of these contaminants leads to better air quality, reducing respiratory irritants and promoting a healthier living space.
Performed comprehensive air conditioning tune-up and system evaluation. Tested AC operation under ambient conditions, verified clean air filter, cleared condensate drain line, and measured 17° temperature differential across the evaporator coil. Inspected blower assembly for proper operation. Cleaned outdoor condenser coil and performed component inspection, identifying pitted contactor and weakening capacitor on compressor circuit. Provided recommendations for capacitor and contactor replacement to ensure continued reliable operation.
Performed comprehensive preventive maintenance tune-up on Lennox EL18XCVS036 air conditioning system. Removed condenser panels and thoroughly rinsed coil assembly to ensure optimal heat transfer efficiency. Conducted complete electrical inspection including voltage, amperage, and connection integrity—all components found within manufacturer specifications. Verified indoor air filter condition, inspected evaporator drain line for proper drainage flow, and confirmed system startup with proper operation achieving 20-degree temperature split across the coil.
Replaced failed pressure switch on well pump system after discovering the existing switch and nipple were completely obstructed with heavy sediment buildup. Cleared the clogged switch nipple to restore proper water flow and installed new 40-60 PSI pressure switch compatible with existing submersible well pump connections. The new switch is factory-set to signal pump start at 40 PSI and stop at 60 PSI. Documented extensive mineral deposits and corrosion throughout the system components. Advised that if sediment issues continue, replacement of the pressure tank and tank tee assembly may be necessary to prevent future failures.
Completed annual plumbing inspection identifying multiple items requiring attention. Inspected under-sink plumbing connections, P-trap configuration, and supply lines, all functioning properly. Identified recirculation pump, shower trim assembly, and pressure reducing valve (PRV) as items needing service or replacement, with estimates prepared for necessary repairs.
Responded to call for water heater leaking from bottom with intermittent hot water issues. Upon inspection, determined the leak was not originating from the water heater unit itself, but from failed CPVC piping located above the water heater in the joist cavity. Replaced the defective CPVC section with new piping and fittings to restore proper system integrity and eliminate the leak.
Completed annual air conditioning maintenance tune-up on 6-year-old system. Rinsed condenser coil to remove debris and improve heat transfer efficiency. Installed hard start kit to reduce compressor startup strain and extend equipment lifespan.
Performed routine AC maintenance tune-up on Trane XE 1000 condenser unit utilizing R22 refrigerant. Identified system freezing issue caused by pitted contactor that was burning the 24-volt control wiring. Replaced failed contactor, repaired damaged low-voltage wiring, and completed full system inspection with borescope documentation of internal components to restore proper cooling operation.
Completed comprehensive AC maintenance tune-up on 18-year-old system per recurring maintenance agreement. Unit exhibited multiple concerns including tilted condenser positioning, questionable refrigerant levels, and inadequate cooling performance as reported by homeowner. Performed full system inspection, coordinated comfort advisor consultation for system evaluation, and executed refrigerant recharge to restore proper operating levels. Inspected and documented clean air filter with proper installation and examined condenser coil condition showing signs of age-related wear. System brought to optimal operating parameters within manufacturer specifications.
Performed routine maintenance tune-up on a 14-year-old Day & Night air conditioning condenser unit. System inspection revealed significant dirt accumulation affecting airflow and efficiency, requiring thorough cleaning of condenser coil and components. Electrical cabinet inspection identified an out-of-range capacitor that could cause compressor and fan motor failure, potentially resulting in no-cool condition. Replaced defective capacitor to restore proper electrical function and prevent system breakdown. Verified all electrical connections, refrigerant service ports, and operational components for proper function. System tested and returned to service with all components operating within normal parameters.
Completed annual air conditioning maintenance and tune-up on a 3-year-old residential HVAC system. Performed comprehensive inspection of all system components, including air handler, condensate drainage lines, electrical connections, and ductwork. Cleaned outdoor condenser unit by rinsing down coils and exterior components to ensure optimal heat transfer and system efficiency. All equipment found operating within normal parameters with no deficiencies noted.
Responded to a plumbing emergency involving a pinhole leak beneath a jacuzzi tub that was causing water damage in the basement below. Upon inspection, identified that the valve body for the hot water handle was leaking. Shut off water supply to the tub to prevent further damage and allow the homeowner to proceed with drywall repairs. Documented the valve body failure, submitted parts order form for replacement components, and protected the work area with plastic sheeting during assessment and repair preparation.
Completed seasonal AC tune-up maintenance on an 8-year-old air conditioning system. Performed comprehensive inspection of all system components, including evaporator coil assembly and heat exchanger fins. Verified proper system operation with temperature readings showing 64.9°F at supply ductwork. Cleaned exterior condenser coils to remove accumulated debris and ensure optimal heat transfer efficiency. All components inspected and found to be in proper working order with no deficiencies noted. System operating within normal parameters and ready for continued service.
Responded to water leak on boiler installed in January. Upon inspection, identified loose brass fittings on ball valves connected to copper piping at the new installation. Tightened all compromised fittings and connections to restore proper seal and eliminate active leak.
Completed comprehensive plumbing inspection of residential system. Water heater and pressure tank both showing signs of age and wear, recommended replacement of both units for optimal system performance. Identified that Rosco filter requires replacement and discovered that shut-off valves (stops) beneath nearly all faucets are seized in the open position, limiting ability to isolate fixtures for future maintenance or repairs.
Responded to no heat call on 30+ year old furnace in residential system located in commercial property. Upon inspection, found blower motor operating with excessive noise and vibration causing unit to shake. Heat exchanger exhibited severe deterioration with visible cracking and material degradation, presenting safety concerns. Documented extensive damage to heat exchanger with photos showing significant rust, corrosion, and structural compromise. Due to age of equipment, critical condition of heat exchanger, and failed blower motor, recommended full system replacement over repair. Coordinated with sales team to provide replacement quote given unsafe operating conditions and cost-prohibitive nature of repairs on unit exceeding expected service life.
Performed maintenance inspection on residential AC system located in attic space. During diagnostic testing with multimeter, identified faulty control board failing to supply 24-volt power to blower motor, preventing proper system operation. Documented equipment make, model, and serial number information with photographs as requested. Provided estimate for control board replacement and awaiting customer approval to proceed with repair.
Completed scheduled AC tune-up on 12-year-old FRP unit experiencing reduced capacity. Performed comprehensive system inspection, replaced failed capacitor, and installed new air filter to restore proper airflow and system performance.
Performed comprehensive annual maintenance on 2-year-old residential air conditioning system per maintenance agreement. Inspected evaporator coil, refrigerant lines, and all HVAC components in mechanical space. Verified proper operation of furnace/air handler unit, checked condensate drainage system, and confirmed all electrical connections were secure. System operating within normal parameters with no issues identified.
Completed comprehensive plumbing inspection of residential utility area and basement mechanical systems. Assessed condition of water supply lines, drainage systems, gas piping, and HVAC-related plumbing connections, documenting findings with photographic evidence. Inspection revealed aging infrastructure with concrete deterioration, moisture concerns, and various utility connections requiring monitoring for future maintenance planning.
Responded to leak at wall-hung sink in unit. Upon inspection, discovered loose packing nut on angle stop causing water seepage. Tightened packing nut and temporarily stopped the leak. Noted both angle stops under sink are severely corroded with extensive rust, mineral buildup, and deterioration, making shut-off valves difficult to operate. Due to advanced corrosion and inability of valves to turn properly, provided estimate for replacement of both angle stops to be scheduled when water can be shut down to entire property.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and Conditions | [cookie_preferences_link]
Web Design and Internet Marketing by RYNO Strategic Solutions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.