Since 1959 Hurlburt, we make it our mission to keep your home comfortable and protected.
with Purchase of Furnace & AC
Includes Merv 16 5" media cabinent and ApcoX Premium UV-light. Cannot be combined with any other offers. Must present coupon at time of service. Not valid on previously completed work.
Few communities in western Wisconsin combine as many different housing styles and homeowner needs as River Falls. The city continues to grow rapidly while maintaining its strong connection to UWRF, local agriculture, and the outdoor lifestyle that makes the Kinnickinnic River Valley such a desirable place to live. That means our technicians regularly work in everything from historic homes and student rentals to executive homes, townhomes, and rural properties throughout Pierce County.
Locals simply call it “The Kinni,” and while the Kinnickinnic River is one of River Falls’ most recognizable landmarks, it also contributes to humidity levels that can make homes uncomfortable during the summer. We regularly help homeowners throughout neighborhoods like South Fork, Whitetail Ridge, and areas near Glen Park solve issues involving humidity, airflow, and aging cooling systems that struggle to keep pace with Wisconsin’s hot and humid weather.
Heat pumps can be a great alternative to traditional air conditioners. Like an AC, they can be paired with a forced-air furnace or air handler. Heat pumps look a lot like traditional air conditioning units but they work a bit differently.
Like a traditional air conditioner, they use the refrigeration cycle to provide cool air in your home. However, these units can use the refrigeration cycle to provide heat as well. To simplify it, they basically run in reverse. The refrigeration cycle allows the heat pump or AC to absorb heat and move it from one area to another. On cooling mode, the unit absorbs the heat from inside your home and releases it outside. On heating mode, it finds heat in the ambient outdoor air and moves it inside to heat your home. While that might not seem like something that can work in our harsh, Wisconsin winters, heat pumps use technology that allow them to work in subzero temperatures.
On heating mode, heat pumps are more efficient than electric and gas-fired furnaces. This is because they don’t have to “create” heat but rather move it from one area to another. Many people who use heat pumps chose them for this reason. Higher energy efficiency means lower operating costs.
Important note for heat pump installations: if you plan to rely on your heat pump for home heating, you must choose a unit that is rated for low temperatures. There are many varieties of heat pumps. The ones that work great in Florida do not work well here. We can use heat pumps efficiently in Wisconsin but you have to have the right one!
Whether you’re dealing with uneven temperatures, rising energy bills, or an older AC system, our team can help improve comfort and efficiency throughout your home.
Why Landlords, Families, and Acreage Owners Need Different Heating SolutionsRiver Falls is one of the few markets where we might service a student rental near UWRF, a family home in Sterling Ponds, and a rural acreage outside town all in the same day. Each property has different heating demands, which is why there is no one-size-fits-all approach when it comes to furnaces, Boilers, Heat Pumps, and Geothermal Systems. Long Wisconsin winters make reliability and efficiency important for every homeowner, regardless of where they live.
Whether you’re maintaining a rental property, upgrading a family home, or improving efficiency on a rural property, we can help you find the right solution.
As River Falls continues to grow, more homeowners are paying attention to indoor air quality. Seasonal allergies, dust, dry winter air, summer humidity, and pet dander all affect comfort inside the home. We frequently help families throughout Highview Meadows, South Fork, and other growing neighborhoods improve indoor comfort through better filtration and humidity control.
The right air quality strategy can improve comfort throughout every season while helping your Heating and A/C system operate more efficiently.
River Falls continues to attract homeowners who are investing in electric vehicles, home offices, smart home technology, backup generators, and upgraded Heating and Air Conditioning systems. As a result, we are seeing strong demand for electrical improvements throughout both newer subdivisions and rural properties where reliability and backup power have become increasingly important.
Whether you’re upgrading a panel, preparing for an EV charger, or installing a generator, our team can help ensure your home’s electrical system is ready for future demands.
From historic homes near downtown to newer developments along County Road FF, plumbing systems throughout River Falls face challenges ranging from frozen pipes and leaking water heaters to hard water and sump pump concerns. We help homeowners protect their homes from costly water damage while improving reliability, efficiency, and water quality.
Whether you’re dealing with a plumbing emergency or planning a preventative upgrade, our team is ready to help.
River Falls is one of the most diverse service markets we work in. Few communities combine university housing, growing subdivisions, rural acreages, Twin Cities commuters, and long-established neighborhoods all within the same market. That variety keeps our technicians working throughout the area every day.
Hurlburt is proud to support the River Falls community through our partnership with UW–River Falls Athletics, including sponsorship of the new softball field. We believe in investing in the communities we serve and building long-term relationships with homeowners throughout the Kinnickinnic River Valley.
Whether you’re attending River Falls Days, Bacon Bash, River Dazzle, or cheering on the UWRF Falcons, you’ve likely seen a Hurlburt truck somewhere around town.
Logan P checked out my garbage disposal, found the Allen wrench, made an adjustment and it worked. He was knowledgeable, polite, and not in a hurry. He’s a fine technician and I’d get him again.
Both team members were great and friendly. They explained everything they were doing and kept me up to date. Doug was very good.
First time customer. Requested both furnace and AC be checked and cleaned. Trevor showed up on time, was quick even in the rain, and explained everything fully. Would definitely recommend Hurlburt and Trevor.
From charming homes near downtown to student rentals by UWRF, growing neighborhoods like Sterling Ponds and Whitetail Ridge, and rural properties beyond city limits, every River Falls home has its own needs. Each property comes with different systems, layouts, and challenges, and Hurlburt brings the experience and local insight to handle them all with confidence and care.
Performed comprehensive AC maintenance tune-up on communicating system, verifying air filter condition, blower speeds, and evaporator coil drainage. Inspected all electrical components, tightened and verified wiring connections at outdoor unit to address intermittent communication error, performed system reset, and cleaned condenser coils. System operational with proper 22-degree temperature split across evaporator coil.
Responded to no cooling complaint where homeowner had already replaced capacitor that was shorted out by a rodent. Performed comprehensive AC tune-up to verify system integrity following the repair. Inspected and confirmed air filter condition, verified evaporator drain was flowing properly, and checked airflow at supply registers. Examined all electrical components including connections, contactors, and newly installed capacitor—all found to be in good working order. Cleaned condenser coil by rinsing thoroughly to remove accumulated debris and restore proper heat transfer. Connected manifold gauges and verified refrigerant pressures were within manufacturer specifications. Measured temperature split at 21°F, confirming system is operating efficiently and cooling properly.
Conducted site assessment to provide estimate for repiping outdoor hose bibs to bypass water softener system, allowing untreated hard water supply for exterior irrigation. Inspected existing plumbing configuration through ceiling access panel, identifying current hose bib connections running through soft water lines. Evaluated feasibility of eliminating existing hose bib connections, adapting current lines to PEX, and routing new supply lines through mechanical room to tie in upstream of water treatment system. Assessed coordination opportunity with planned bathroom shower demolition due to existing leak damage, which would provide optimal access for running new water lines through ceiling cavity with minimal additional penetrations. Documented existing copper and galvanized steel piping configuration with shutoff valves, pipe routing through floor joists, and access points for proposed work. Provided comprehensive estimate options for either adding new dedicated water line to hose bib
Performed comprehensive air conditioning tune-up on 2-year-old Lennox unit. Cleaned indoor filters and conducted full system inspection. Disassembled outdoor unit due to known rodent intrusion history and discovered active mouse nest with occupants inside condenser cabinet. Removed all nesting material and debris, reassembled unit, and performed thorough coil rinse on outdoor condenser. System test confirmed proper operation with 20-degree temperature split, indicating optimal cooling performance.
Responded to no cooling complaint on 1996 Rheem air conditioning system. Upon arrival, homeowner reported unit had been icing up repeatedly despite cleaning both condenser and evaporator coils. Connected manifold gauges to system and measured suction pressure at approximately 5 psi, indicating severe refrigerant loss. System is operating on R-22 refrigerant and essentially flat. Discussed refrigerant options, EPA regulations, and certification requirements with homeowner. Recommended system replacement due to age of equipment and refrigerant phase-out. Homeowner declined immediate replacement and will discuss options with family.
Returned to site to replace defective ECM condenser fan motor module under parts warranty on aging York HVAC system. Removed failed motor assembly and took advantage of access to thoroughly wash condenser coil, removing accumulated debris and dirt buildup. Installed replacement motor module, verified proper electrical connections, and restored system to operation. Conducted full operational testing with system running successfully and achieving 3-degree temperature drop during on-site verification, confirming adequate cooling performance and proper airflow through cleaned condenser.
Completed comprehensive maintenance tune-up on both furnace and air conditioning systems. Identified and replaced failing dual capacitor and severely pitted contactor showing signs of electrical burning. Added R22 refrigerant to bring system to proper operating charge. Performed ductwork inspection using camera equipment to assess interior conditions. Coordinated with comfort advisor regarding age-related equipment concerns, noting the air conditioning unit is 22 years old while the furnace is 5 years old.
Responded to no cooling complaint on 1-year-old ductless mini-split system installed on outdoor deck. Upon inspection, determined that refrigerant lines had been disturbed during recent deck board replacement, causing flare fittings to loosen and resulting in complete refrigerant loss. Diagnosed leak at connection points where outdoor unit had been temporarily relocated. Provided estimate for pressure testing system, repairing compromised flare connections, and recharging unit to factory specifications. Customer declined repair services.
Responded to no cool call for 9-year-old AC system experiencing insufficient cooling with only 10-12 degree temperature differential from outdoor ambient. Diagnosed system low on refrigerant charge with 10-degree temperature split and 5-degree subcooling, indicating undercharge condition. Recharged system to manufacturer specifications, restoring proper cooling capacity and system performance.
Completed routine plumbing inspection and reverse osmosis system maintenance, replacing all filter cartridges in the four-stage under-sink water filtration system. Verified proper water flow, checked all connections and tubing for leaks, and ensured the RO system was functioning correctly throughout the residence.
Responded to call for clogged toilet and sink in toddler room with improper flushing. Upon inspection, identified foreign objects (toys) causing blockages in both fixtures. Manually extracted obstructions from toilet bowl and sink drain. Verified proper water flow and flush operation following removal. Fixtures restored to full functionality.
Performed comprehensive cleaning service on two ductless mini-split indoor units. Disassembled both head units using bib kit protection, thoroughly cleaned blower wheels and internal components, and verified proper condensate drain operation on both systems. All units reassembled, tested, and confirmed operating correctly.
Responded to a toilet reset request following bathroom floor replacement due to previous water leak damage. Successfully reset the toilet on the newly installed tile flooring, installed a new water supply line, and performed eight flush cycles to verify proper seal and confirm no leaks were present at the base or supply connection. All fixtures tested and functioning properly upon completion.
Performed comprehensive AC tune-up on 20-year-old residential cooling system as part of maintenance agreement. During routine inspection, discovered unit operating with low R22 refrigerant charge based on pressure and temperature measurements taken at outdoor condenser. Coordinated follow-up appointment with service advisor to provide replacement system estimates for both air conditioning unit and furnace due to age of equipment and refrigerant availability concerns.
Responded to no cooling complaint on 13-year-old Carrier system with water leakage. Found furnace filter completely plugged with ultrasonic humidifier dust, causing evaporator coil to freeze and restrict airflow. Removed clogged filter and installed new filter that was on-site. Allowed system to thaw and verified proper condensate drainage. Test ran unit to confirm cooling operation restored. Checked refrigerant charge levels, which were within manufacturer specifications.
Responded to service call for water softener not cycling through salt properly. Upon inspection, discovered a salt bridge formation in the brine tank preventing proper regeneration cycle. Broke up and removed the salt bridge to restore normal water softener operation. Verified system functionality and proper brine draw after repair. Coordinated entry access remotely per customer instructions as property was unoccupied during service visit.
Responded to a clogged toilet service call and successfully cleared the obstruction using a toilet auger. Upon arrival, diagnosed the blockage and snaked the toilet fixture to restore proper drainage and flushing function.
Responded to a no heating or cooling complaint on a 10-year-old geothermal heat pump system. Upon arrival, confirmed unit was cycling on and shutting off after brief operation. Connected refrigerant gauges and discovered system pressure at nearly zero PSI, indicating significant refrigerant loss. Due to the specialized nature of geothermal systems, determined that proper diagnosis requires a geothermal-certified technician to pressure test the ground loop, inspect heat exchanger, and locate the source of refrigerant leak. Shut down unit to prevent compressor damage and scheduled follow-up appointment with qualified geothermal specialist for complete system evaluation and repair.
Completed kitchen plumbing hookup including installation of new faucet on double-basin stainless steel sink. Connected water supply lines, installed drain assembly with P-trap configuration, and verified proper operation of all fixtures. All connections tested and confirmed leak-free with full functionality restored.
Responded to no cooling complaint on recently installed two-stage AC system. Upon inspection, discovered unit was only operating in first stage due to Y1/Y2 jumper being cut on furnace control board during installation. System was configured with single-stage zone control panel incompatible with two-stage thermostat control. Restored proper operation by jumpering Y1 and Y2 terminals on control board to enable both stages of cooling. Verified system performance with 22° temperature split across evaporator coil and adjusted board settings for optimal operation.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.