Since 1959 Hurlburt, we make it our mission to keep your home comfortable and protected.
Few communities in western Wisconsin combine as many different housing styles and homeowner needs as River Falls. The city continues to grow rapidly while maintaining its strong connection to UWRF, local agriculture, and the outdoor lifestyle that makes the Kinnickinnic River Valley such a desirable place to live. That means our technicians regularly work in everything from historic homes and student rentals to executive homes, townhomes, and rural properties throughout Pierce County.
Locals simply call it “The Kinni,” and while the Kinnickinnic River is one of River Falls’ most recognizable landmarks, it also contributes to humidity levels that can make homes uncomfortable during the summer. We regularly help homeowners throughout neighborhoods like South Fork, Whitetail Ridge, and areas near Glen Park solve issues involving humidity, airflow, and aging cooling systems that struggle to keep pace with Wisconsin’s hot and humid weather.
Heat pumps can be a great alternative to traditional air conditioners. Like an AC, they can be paired with a forced-air furnace or air handler. Heat pumps look a lot like traditional air conditioning units but they work a bit differently.
Like a traditional air conditioner, they use the refrigeration cycle to provide cool air in your home. However, these units can use the refrigeration cycle to provide heat as well. To simplify it, they basically run in reverse. The refrigeration cycle allows the heat pump or AC to absorb heat and move it from one area to another. On cooling mode, the unit absorbs the heat from inside your home and releases it outside. On heating mode, it finds heat in the ambient outdoor air and moves it inside to heat your home. While that might not seem like something that can work in our harsh, Wisconsin winters, heat pumps use technology that allow them to work in subzero temperatures.
On heating mode, heat pumps are more efficient than electric and gas-fired furnaces. This is because they don’t have to “create” heat but rather move it from one area to another. Many people who use heat pumps chose them for this reason. Higher energy efficiency means lower operating costs.
Important note for heat pump installations: if you plan to rely on your heat pump for home heating, you must choose a unit that is rated for low temperatures. There are many varieties of heat pumps. The ones that work great in Florida do not work well here. We can use heat pumps efficiently in Wisconsin but you have to have the right one!
Whether you’re dealing with uneven temperatures, rising energy bills, or an older AC system, our team can help improve comfort and efficiency throughout your home.
Why Landlords, Families, and Acreage Owners Need Different Heating SolutionsRiver Falls is one of the few markets where we might service a student rental near UWRF, a family home in Sterling Ponds, and a rural acreage outside town all in the same day. Each property has different heating demands, which is why there is no one-size-fits-all approach when it comes to furnaces, Boilers, Heat Pumps, and Geothermal Systems. Long Wisconsin winters make reliability and efficiency important for every homeowner, regardless of where they live.
Whether you’re maintaining a rental property, upgrading a family home, or improving efficiency on a rural property, we can help you find the right solution.
As River Falls continues to grow, more homeowners are paying attention to indoor air quality. Seasonal allergies, dust, dry winter air, summer humidity, and pet dander all affect comfort inside the home. We frequently help families throughout Highview Meadows, South Fork, and other growing neighborhoods improve indoor comfort through better filtration and humidity control.
The right air quality strategy can improve comfort throughout every season while helping your Heating and A/C system operate more efficiently.
River Falls continues to attract homeowners who are investing in electric vehicles, home offices, smart home technology, backup generators, and upgraded Heating and Air Conditioning systems. As a result, we are seeing strong demand for electrical improvements throughout both newer subdivisions and rural properties where reliability and backup power have become increasingly important.
Whether you’re upgrading a panel, preparing for an EV charger, or installing a generator, our team can help ensure your home’s electrical system is ready for future demands.
From historic homes near downtown to newer developments along County Road FF, plumbing systems throughout River Falls face challenges ranging from frozen pipes and leaking water heaters to hard water and sump pump concerns. We help homeowners protect their homes from costly water damage while improving reliability, efficiency, and water quality.
Whether you’re dealing with a plumbing emergency or planning a preventative upgrade, our team is ready to help.
River Falls is one of the most diverse service markets we work in. Few communities combine university housing, growing subdivisions, rural acreages, Twin Cities commuters, and long-established neighborhoods all within the same market. That variety keeps our technicians working throughout the area every day.
Hurlburt is proud to support the River Falls community through our partnership with UW–River Falls Athletics, including sponsorship of the new softball field. We believe in investing in the communities we serve and building long-term relationships with homeowners throughout the Kinnickinnic River Valley.
Whether you’re attending River Falls Days, Bacon Bash, River Dazzle, or cheering on the UWRF Falcons, you’ve likely seen a Hurlburt truck somewhere around town.
Logan P checked out my garbage disposal, found the Allen wrench, made an adjustment and it worked. He was knowledgeable, polite, and not in a hurry. He’s a fine technician and I’d get him again.
Both team members were great and friendly. They explained everything they were doing and kept me up to date. Doug was very good.
First time customer. Requested both furnace and AC be checked and cleaned. Trevor showed up on time, was quick even in the rain, and explained everything fully. Would definitely recommend Hurlburt and Trevor.
From charming homes near downtown to student rentals by UWRF, growing neighborhoods like Sterling Ponds and Whitetail Ridge, and rural properties beyond city limits, every River Falls home has its own needs. Each property comes with different systems, layouts, and challenges, and Hurlburt brings the experience and local insight to handle them all with confidence and care.
Hurlburt Heating & Plumbing has completed 20 jobs in River Falls, WI in August 2026.
The most recent job was on August 27, 2026.
Responded to water leak in basement affecting shower valve system. Upon investigation, identified active leak on hot water supply line connected to shower valve. Attempted to remove and rethread the hot side connection, but discovered threads had broken inside the valve body, preventing proper repair. As a temporary solution to restore water service, capped both hot and cold water supply lines to isolate the damaged shower valve while maintaining water availability to other fixtures throughout the residence. Accessed plumbing through ceiling cavity and wall opening to reach affected components. Documented conditions with photos showing PVC and copper piping configuration in crawl space and wall cavity access point where valve is located.
Responded to outdoor water spigot leak at residential property. Upon inspection, identified leaking sillcock with compromised internal components. Replaced defective handle and stem assembly to restore proper function and eliminate leak. Fixture now operates without water loss.
Responded to no cooling complaint on Unit 6 with outdoor unit failing to energize. Diagnosed and identified failed dual-run capacitor as root cause preventing compressor and condenser fan operation. Replaced defective capacitor with new unit rated at 440 VAC (45+5 MFD), restoring normal system operation and cooling functionality.
Responded to no cooling call on 2005 AC system that was buzzing and failing to start after wasp nest removal from electrical components. Diagnosed and replaced failed run capacitor in condenser unit, performed condenser coil wash, and verified system operation with proper cooling restored. Completed comprehensive furnace inspection in preparation for home sale. Ran system through 15-minute cycle to verify temperature rise within specifications. Cleaned flame sensor, tested igniter at 50 ohms, and identified weak blower motor capacitor reading 4.8 µF out of rated 7.5 µF. Replaced blower capacitor. Thoroughly inspected heat exchanger with no cracks or holes detected. Verified evaporator coil clean, pressure switch ports clear, and gas pressure properly set. Air filter found in acceptable condition. All components tested and system operating to manufacturer specifications.
Responded to a water leak on the irrigation line at the main water supply entry point. The leak was identified at a 1" copper tee fitting located before the pressure vacuum breaker (PVB), specifically at the drain plug area of the brass valve assembly, with water dripping every 10-15 seconds. Performed a minor repipe of the copper tee connection to eliminate the leak and restore proper function to the irrigation system.
Responded to a significant water leak from an ELKAY bottle filling station and drinking fountain unit in the clinic area. Upon inspection, determined the evaporator was defective and beyond repair. Shut off water supply to the unit to prevent further leakage as requested, documented the faulty component with photographs, and submitted a purchase order for a replacement evaporator.
Responded to a shower valve cartridge replacement where the homeowner encountered difficulty during a DIY repair attempt. Successfully removed the stuck cartridge from the valve body and installed the customer-supplied replacement cartridge. The original cartridge showed significant corrosion and oxidation on the brass threading, which contributed to the removal difficulty.
Performed comprehensive maintenance on Daikin mini-split heat pump system. Removed and cleaned indoor unit filters by rinsing thoroughly, then cleaned outdoor condenser coil. Inspected indoor unit housing for pest intrusion and verified cleanliness of internal components. Checked blower wheel condition and confirmed evaporator drain line was clear and draining properly. Started system and monitored operation for 20 minutes, verifying proper cooling performance with 20-degree temperature differential across the evaporator coil. System operating within normal parameters.
Performed comprehensive tune-up on mini split system installed approximately one year ago. Inspected indoor unit and noted blower wheel showing minor dirt accumulation but remains within acceptable operating parameters for continued service. Removed and cleaned air filter, then performed condenser coil cleaning due to dirt buildup affecting heat transfer efficiency. Inspected outdoor unit cabinet interior for pest intrusion and confirmed no rodent activity present. Reinstalled filter, energized system, and verified proper operation with 23-degree temperature differential across evaporator coil, confirming optimal cooling performance.
Completed comprehensive cooling maintenance visit on residential AC system. Performed full system inspection including electrical components, evaporator drain verification, and condenser coil cleaning. Inspected air filter and confirmed homeowner's existing replacement schedule, verified proper drainage operation, and thoroughly cleaned and rinsed condenser coil with all panels reinstalled upon completion.
Responded to bathroom sink drainage issue. Upon arrival, diagnosed clogged P-trap causing water backup in bathroom lavatory. Removed and replaced deteriorated P-trap assembly beneath sink. Repaired malfunctioning drain stopper mechanism to restore proper operation. Tested system for proper drainage and verified no leaks at trap connections upon completion.
Responded to a slow-draining kitchen sink in a home with original 1970 cast iron plumbing. Upon inspection, identified a partial clog caused by significant grease buildup in the drain line. Successfully snaked the kitchen sink drain using a rigid drain machine, extracting large amounts of accumulated grease and restoring proper drainage flow.
Installed new American Standard ADA comfort height toilet in bone color. Replaced existing fixture with new unit including wax ring, mounting bolts, and complete installation per manufacturer specifications. Verified proper operation and seal integrity upon completion.
Responded to callback for AC system installed 11 days prior with inadequate cooling and frozen evaporator coil. Upon inspection, verified clean air filter and diagnosed insufficient airflow as probable cause. Adjusted fan speed settings, increasing airflow on low cooling and dehumidification modes to prevent future coil freeze-up. Instructed occupant to allow coil to fully thaw before system operation resumes, with follow-up visit scheduled to verify proper system performance and rule out additional issues once thawing is complete.
Responded to service call for leaking shower faucet in master bathroom. Upon inspection, identified faulty Delta cartridge as source of leak. Attempted cartridge replacement, but determined shower valve body required full replacement due to internal damage. Successfully removed existing shower valve assembly and installed new shower valve with complete fixture, restoring proper water control and eliminating leak.
Responded to sewer backup emergency call. Upon arrival, confirmed main sewer line was backing up into the property. Accessed the sewer cleanout located in the garage area. Deployed large Ridgid cable machine to clear the blockage. Successfully augered through the obstruction and restored proper drainage flow. Tested system to verify complete clearance of the line. Sewer is now draining properly with no further backup issues.
Replaced blower motor in HVAC system after sourcing the required part. Following installation, tested and verified cooling operation throughout the system. Inspected outdoor unit capacitor and confirmed proper electrical connections, with system now operating at optimal cooling performance.
Responded to emergency water leak under kitchen sink caused by failed hot water supply line connecting faucet to shut-off valve. Upon arrival, water supply to home had been shut off to prevent further damage. Removed existing kitchen faucet assembly and disconnected failed supply hose. Installed new single-handle kitchen faucet with chrome finish, including complete supply line replacement to both hot and cold water connections. Verified all connections for proper seal, restored water supply, and tested faucet operation to ensure no leaks and proper functionality.
Conducted phone follow-up regarding ongoing water softener regeneration issues causing cloudy, salty water and TDS spikes post-regeneration. Customer reported continued 20-day regeneration cycles with frosted white pipes and film buildup near system. Discussed previous diagnostic findings showing TDS jumping from 261 to 704 after regeneration, indicating leeching during regen cycles, with suspected faulty spacer/seal kit or bypass valve. Reviewed next steps to schedule appointment for head replacement, seal kit swap, or bypass valve replacement under warranty coverage, with flexible scheduling available during business hours before next regeneration cycle in approximately 17 days.
Responded to after-hours no cooling call with reports of loud noise from ceiling-mounted air handler in hallway. Accessed unit through ceiling tiles and found drive belt had failed and come off pulley system. Unit was powered down to prevent further damage, as proper replacement belt was not available on truck. Facility maintenance staff will complete belt replacement and restoration of service.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.