Since 1959 Hurlburt, we make it our mission to keep your home comfortable and protected.

Few communities in western Wisconsin combine as many different housing styles and homeowner needs as River Falls. The city continues to grow rapidly while maintaining its strong connection to UWRF, local agriculture, and the outdoor lifestyle that makes the Kinnickinnic River Valley such a desirable place to live. That means our technicians regularly work in everything from historic homes and student rentals to executive homes, townhomes, and rural properties throughout Pierce County.
Locals simply call it “The Kinni,” and while the Kinnickinnic River is one of River Falls’ most recognizable landmarks, it also contributes to humidity levels that can make homes uncomfortable during the summer. We regularly help homeowners throughout neighborhoods like South Fork, Whitetail Ridge, and areas near Glen Park solve issues involving humidity, airflow, and aging cooling systems that struggle to keep pace with Wisconsin’s hot and humid weather.
Heat pumps can be a great alternative to traditional air conditioners. Like an AC, they can be paired with a forced-air furnace or air handler. Heat pumps look a lot like traditional air conditioning units but they work a bit differently.
Like a traditional air conditioner, they use the refrigeration cycle to provide cool air in your home. However, these units can use the refrigeration cycle to provide heat as well. To simplify it, they basically run in reverse. The refrigeration cycle allows the heat pump or AC to absorb heat and move it from one area to another. On cooling mode, the unit absorbs the heat from inside your home and releases it outside. On heating mode, it finds heat in the ambient outdoor air and moves it inside to heat your home. While that might not seem like something that can work in our harsh, Wisconsin winters, heat pumps use technology that allow them to work in subzero temperatures.
On heating mode, heat pumps are more efficient than electric and gas-fired furnaces. This is because they don’t have to “create” heat but rather move it from one area to another. Many people who use heat pumps chose them for this reason. Higher energy efficiency means lower operating costs.
Important note for heat pump installations: if you plan to rely on your heat pump for home heating, you must choose a unit that is rated for low temperatures. There are many varieties of heat pumps. The ones that work great in Florida do not work well here. We can use heat pumps efficiently in Wisconsin but you have to have the right one!
Whether you’re dealing with uneven temperatures, rising energy bills, or an older AC system, our team can help improve comfort and efficiency throughout your home.
Why Landlords, Families, and Acreage Owners Need Different Heating SolutionsRiver Falls is one of the few markets where we might service a student rental near UWRF, a family home in Sterling Ponds, and a rural acreage outside town all in the same day. Each property has different heating demands, which is why there is no one-size-fits-all approach when it comes to furnaces, Boilers, Heat Pumps, and Geothermal Systems. Long Wisconsin winters make reliability and efficiency important for every homeowner, regardless of where they live.
Whether you’re maintaining a rental property, upgrading a family home, or improving efficiency on a rural property, we can help you find the right solution.
As River Falls continues to grow, more homeowners are paying attention to indoor air quality. Seasonal allergies, dust, dry winter air, summer humidity, and pet dander all affect comfort inside the home. We frequently help families throughout Highview Meadows, South Fork, and other growing neighborhoods improve indoor comfort through better filtration and humidity control.
The right air quality strategy can improve comfort throughout every season while helping your Heating and A/C system operate more efficiently.
River Falls continues to attract homeowners who are investing in electric vehicles, home offices, smart home technology, backup generators, and upgraded Heating and Air Conditioning systems. As a result, we are seeing strong demand for electrical improvements throughout both newer subdivisions and rural properties where reliability and backup power have become increasingly important.
Whether you’re upgrading a panel, preparing for an EV charger, or installing a generator, our team can help ensure your home’s electrical system is ready for future demands.
From historic homes near downtown to newer developments along County Road FF, plumbing systems throughout River Falls face challenges ranging from frozen pipes and leaking water heaters to hard water and sump pump concerns. We help homeowners protect their homes from costly water damage while improving reliability, efficiency, and water quality.
Whether you’re dealing with a plumbing emergency or planning a preventative upgrade, our team is ready to help.
River Falls is one of the most diverse service markets we work in. Few communities combine university housing, growing subdivisions, rural acreages, Twin Cities commuters, and long-established neighborhoods all within the same market. That variety keeps our technicians working throughout the area every day.
Hurlburt is proud to support the River Falls community through our partnership with UW–River Falls Athletics, including sponsorship of the new softball field. We believe in investing in the communities we serve and building long-term relationships with homeowners throughout the Kinnickinnic River Valley.
Whether you’re attending River Falls Days, Bacon Bash, River Dazzle, or cheering on the UWRF Falcons, you’ve likely seen a Hurlburt truck somewhere around town.
Logan P checked out my garbage disposal, found the Allen wrench, made an adjustment and it worked. He was knowledgeable, polite, and not in a hurry. He’s a fine technician and I’d get him again.
Both team members were great and friendly. They explained everything they were doing and kept me up to date. Doug was very good.
First time customer. Requested both furnace and AC be checked and cleaned. Trevor showed up on time, was quick even in the rain, and explained everything fully. Would definitely recommend Hurlburt and Trevor.
From charming homes near downtown to student rentals by UWRF, growing neighborhoods like Sterling Ponds and Whitetail Ridge, and rural properties beyond city limits, every River Falls home has its own needs. Each property comes with different systems, layouts, and challenges, and Hurlburt brings the experience and local insight to handle them all with confidence and care.
Hurlburt Heating & Plumbing has completed 20 jobs in River Falls, WI between August 2026 and September 2026.
The most recent job was on September 2, 2026.
Performed comprehensive maintenance agreement tune-up on residential HVAC system including furnace and air conditioning unit. Documented equipment make, model, and serial numbers with photographs. Conducted operational testing of both heating and cooling systems. Furnace inspection revealed weak blower motor capacitor with evidence of previous replacement. Recommended full blower motor replacement for long-term reliability. Performed thorough inspection of heat exchanger and humidifier with no issues identified. All furnace components tested and verified operational. Transitioned system to cooling mode for air conditioning evaluation. Discovered crankcase heater had melted and damaged wiring at compressor housing. Removed compromised crankcase heater assembly and repaired affected wiring to restore safe electrical connections. Cleaned outdoor condensing unit and removed accumulated debris. Measured system pressures and identified refrigerant charge significantly below manufacturer s
Performed camera inspection of main drain line due to concerns about potential tree root intrusion. Inspection revealed root infiltration at four separate locations along the line, with the fourth location showing the most severe blockage. Cleared all roots from the drain line and conducted follow-up camera inspection to verify complete removal and restore proper flow.
Completed comprehensive maintenance agreement service on 13-year-old Lennox HVAC system including both furnace and air conditioning unit tune-ups. Identified dirty condenser coil requiring deep cleaning; left exterior panels removed per homeowner request to allow self-completion of coil cleaning. Coordinated comfort advisor follow-up for system evaluation.
Responded to no cooling call on 10+ year old air conditioning system. Found thermostat calling for cool with indoor blower operating, but outdoor condenser unit humming and not starting. Diagnosed failed capacitor preventing compressor and condenser fan motor operation. Replaced defective capacitor with new dual run capacitor, rinsed outdoor coil to remove debris accumulation, and verified system startup. Unit now operating properly with normal cooling cycle restored.
Relocated Energy Systems Prime Series air conditioning condenser unit to achieve required 3-foot clearance from gas meter per safety code compliance. Verified proper level and alignment of unit after repositioning using precision leveling tools to ensure optimal operation and drainage.
Completed installation of an 80-gallon Bradford White electric water heater designed for light-duty commercial applications with intermittent hot water loads. Unit features adjustable thermostat with temperature range of 120° to 181°F, manual reset high temperature cutoff, and COREGARD™ anode rods with stainless steel core for extended tank protection. Installed water heater in basement utility room on concrete floor against cinder block wall. Connected copper supply piping to top of unit and installed temperature and pressure relief valve with proper discharge pipe running down side of tank. Verified all plumbing connections are secure and leak-free. Ensured unit meets standby loss requirements of U.S. Department of Energy and current ASHRAE/IES 90.1 standards. Installation includes 6-year limited tank warranty and all applicable permits were obtained for the work performed.
Responded to a main line sewer backup that caused flooding through the basement floor drain. Upon inspection, discovered root intrusion in the main drain line. Successfully cleared the blockage using a mechanical snake, then performed a camera inspection to verify the line was fully restored and assess the condition of the piping.
Responded to a water leak emergency underneath a kitchen sink where the supply line was actively leaking and pooling water. The existing plumbing configuration lacked individual shut-off valves at the fixture, requiring the main water supply to the home to be shut off. Installed new angle stop shut-off valves and replaced the deteriorated supply lines with braided stainless steel flexible connectors to both hot and cold water supplies serving the kitchen sink. Upon completion, restored water service and performed a thorough leak inspection to verify all connections were secure and watertight with no signs of dripping or moisture accumulation.
Completed scheduled maintenance on reverse osmosis water treatment system, replacing all three RO filtration stages and installing a new UV light sterilization bulb. System was tested for proper flow rate and water quality following component replacement, with all connections verified leak-free and UV monitoring display confirming operational status.
Responded to a toilet leak in an owner-occupied residence. Upon inspection, identified a failed tank-to-bowl gasket on an Eljer toilet causing water seepage. Removed the existing toilet and replaced it with a new ADA-compliant toilet, ensuring proper seal installation and secure mounting. Tested the new installation for leaks and verified proper flush operation before completing the service.
Responded to slow draining kitchen sink with suspected clog in basement area. Successfully snaked the kitchen sink drain line to restore proper flow and replaced the malfunctioning Studor vent to ensure adequate drainage system ventilation.
Responded to service call for leaking water heater with visible water accumulation on floor. Upon inspection, identified an 80-gallon U.S. Craftmaster electric water heater actively leaking from the bottom of the tank, indicating internal tank failure. Unit was still producing hot water at time of assessment. Documented existing conditions with photographs showing the water heater installation in basement utility area, copper supply lines, yellow-handled shut-off valve, and water staining on concrete floor surrounding the base of the unit. Provided customer with detailed estimate for complete water heater replacement due to non-repairable tank failure.
Completed comprehensive furnace tune-up on propane system. Tested furnace operation and verified proper temperature rise with no overheating conditions. Checked gas pressure at manifold and confirmed within specification. Replaced air filter and cleared condensate drain line. Inspected flame sensor and igniter for proper operation. During inspection, identified significantly rusted burners requiring replacement due to propane system corrosion. Documented condition with photographs. Evaporator coil found to be slightly dirty with accessible cleaning area between furnace and coil assembly. Scheduled return visit to replace burner assembly and perform evaporator coil cleaning. Inspected blower wheel assembly, noting dust accumulation consistent with normal operation. All electrical components and safety devices tested and functioning properly. System currently operating within normal parameters.
Responded to report of toilet running intermittently. Upon inspection, identified leak in toilet tank caused by improperly adjusted flapper chain. Chain length was excessive, causing it to become caught in the flush valve and preventing proper seal. Shortened flapper chain to appropriate length, tested flush mechanism multiple times to ensure proper operation and complete seal. Verified leak was resolved and toilet now functions correctly with no water waste.
Completed comprehensive seasonal tune-up on 18 and 19-year-old furnace and air conditioning system. Performed full system inspection assessing safety, efficiency, and operational reliability. Replaced air filter and thoroughly cleaned igniter and flame sensor on furnace. Inspected outdoor condenser unit and cleaned significantly dirty outdoor coil to restore proper airflow and heat transfer. Verified refrigerant charge levels were adequate with no leaks detected. Measured and confirmed acceptable temperature splits across evaporator coil indicating proper system performance. Tested electrical components and confirmed all safety controls functioning correctly. Noted outdoor condenser unit positioned in close proximity to deck which may present access challenges for future equipment replacement. Both heating and cooling systems tested and confirmed operational upon completion. Informed property owner of availability of complimentary estimates for equipment replacement should upgrade be d
Responded to water leak emergency at property. Upon arrival, investigated reported leak on main water line. Initial assessment indicated potential issue with water line connection off main pipes or coupler joint at water main itself. Conducted thorough inspection of utility area and traced leak source to hot water supply line located beneath wash sink. Identified compromised section of copper piping as cause of active leak. Leak was not at main water line as initially suspected, but rather isolated to hot side plumbing under sink. Shut off water supply to affected area and removed damaged copper pipe section. Measured and cut replacement copper piping to proper specifications. Installed new copper section using appropriate fittings and connections. Soldered joints to ensure watertight seal. Restored water supply and pressure tested repair to verify no additional leaks present. Inspected surrounding plumbing infrastructure in utility space, noting existing PVC drainage lines, variou
Responded to service call for stripped kitchen sink shut-off valve and pre-countertop replacement plumbing work. Replaced all deteriorated angle stops under kitchen and bathroom sinks due to seized valves that would not operate properly. Disconnected all sink plumbing in kitchen and bathrooms to facilitate countertop replacement scheduled for same day.
Responded to service call for toilet that was flushing slowly and required holding the handle down for extended periods. Upon inspection, determined that repair was not feasible and proceeded with complete toilet replacement. Removed existing standard-height toilet and installed new comfort height toilet unit. Verified proper flushing operation, checked for leaks at water supply connection and wax ring seal, and confirmed all components functioning correctly upon completion.
Responded to outdoor faucet leak complaint and diagnosed failed sillcock assembly. Removed existing defective sillcock and installed new frost-free sillcock unit to prevent future freeze damage. Tested system for proper operation and verified complete seal with no leakage detected upon completion.
Completed annual AC tune-up and maintenance under filter replacement program. Inspected indoor blower assembly and evaporator coil, finding both clean and operating properly with adequate drainage. Performed electrical inspection on outdoor unit with all readings within manufacturer specifications. Discovered heavily plugged outdoor condenser coil, performed thorough coil cleaning to restore proper airflow and heat transfer. Replaced air filter and verified system operation with 15-minute run test, confirming temperature split exceeded 20 degrees and all components functioning normally. Recommended monthly filter replacement schedule for optimal system performance.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.