We’ve assisted homeowners for over 65 years and will proudly service your home as well.

Snowy weather turns Mound into a winter wonderland, but it’s hard to appreciate the beauty of areas like Hyland Hills if you don’t have a reliable heating system at home. Whether you hit the slopes, skate on Cooks Bay, or go fishing at Lake Waconia, you want your house to be a warm haven to return to. With our expert services, you can save money on heating costs and never worry about breakdowns during a Minnesota cold snap.
We’ll Keep You Warm With:
- Heating repair: Worn-out heat exchangers, blower motors, and pilot lights cause breakdowns and raise your heating costs. Our repair services target all of these problems and more.
- Heating installation: Need a new heater installed? We install systems of all types, including gas and electric furnaces, boilers, and heat pumps.
- Heating maintenance: Members of the Hurlburt Family Rewards Program receive annual heating maintenance to avoid breakdowns. You also get perks like discounts on repairs, parts, and accessories.
Refrigerant leaks and other AC problems, like clogged air filters, can be harmful to your health. They can also make it impossible to keep your home cool. We want to help you create a home that always stays cool during warmer weather. You’ll feel better and have more energy to enjoy all that Mound has to offer, like swimming at Surfside Park and kayaking on Lake Minnetonka.
Enjoy Efficient Cooling Services:
- Cooling repair: A malfunctioning AC can raise energy bills and take the fun out of the Minnesota summer. Our repairs restore efficiency by fixing refrigerant leaks, worn-out parts, and other problems.
- Cooling installation: Choosing a home cooling system can be overwhelming. We offer expert advice and can answer all your questions to help you make the right decision for your family. Count on us to install your new system with all the care you deserve.
- Cooling maintenance: To extend the life of your air conditioner and reduce its energy use, join the Hurlburt Family Rewards Program. Our annual tune-ups can help you prevent costly problems.
When water leaks in your home, it can severely damage the walls, floors, and foundation. Leaks also create wet situations where mold can grow. We can put your worries about these problems to rest. We are experts at finding hidden leaks in places like basements, crawl spaces, and attics. Our water treatment solutions help soften Mound’s hard water supply and reduce chemical contaminants.
There are lots of electrical upgrades that will make your house more secure and convenient. We can add outdoor security lighting for enhanced safety and EV chargers so you can skip the lines at Mound’s public chargers. We can add smart outlets so you can control all your devices from your phone. And if something goes wrong, call us for expert electrical repairs to get your home safe, reliable, and powered up again.
Turn to Us for Fast, Effective Electrical Work:
- Electrical repair: Get fast repairs so you can keep using your TVs, appliances, lights, and outlets. We fix everything from faulty wiring to circuit breaker issues.
- Electrical installation: You need a qualified electrician for installations to ensure safety, lasting work, and code compliance. We can add generators, light fixtures, outlets, circuit breakers, ceiling fans, and more.
We make it easy to access our services in all parts of Mound. Our employees genuinely care about the community and strive to create comfortable, safe, and efficient homes. Whether you’ve got a broken water heater in a house near Carbone’s or have a busted AC in your waterfront home, call Hurlburt. We’re ready to help!
We are proud to deliver outstanding, detail-oriented service to each and every customer. Our skills and knowledge are important, but our devotion to exceeding expectations is why our customers make us their home service partners for life.
For over 65 years, we haven’t wavered in our commitment to an exceptional level of home care. From furnace repair and toilet installation to EV charging stations, we don’t just fix and transform houses. We make sure you feel cared for!
Call Hurlburt now to speak with Mound’s most compassionate plumbing, electrical, and HVAC company. Welcome to the Hurlburt Family!
Hurlburt Heating & Plumbing has completed 20 jobs in Mound, MN between August 2026 and November 2026.
The most recent job was on November 16, 2026.
Hurlburt Heating & Plumbing has completed 44 jobs in Mound, MN in the last 12 months. The first job there was in April 2025.
Performed annual fall tune-up on two furnaces, including inspection of the heat exchanger via inspection camera, which revealed rust streaking along a seam, and cleaning and servicing of the flame sensor. Serviced two humidifiers and two ground-fault protection units, and replaced dirty filters. Noted rust staining and corrosion around the floor drain and cut drain piping near the equipment as an area for follow-up.
Responded to a no-heat call on a 10+ year old furnace that was failing to start. Diagnosis identified a defective integrated control board, which was replaced to restore the ignition sequence and heating operation. Inspection also noted corrosion on the rolled edge of an interior metal panel and weathering on the flue/vent piping, which should be monitored during future maintenance.
Diagnosed a no-heat condition on a furnace displaying an A500 error code following a customer thermostat replacement. Inspection of the zone control panel and control board wiring revealed numerous disconnected, spliced, and wire-nutted conductors, a frayed communication cable jacket, heavy dust and debris accumulation, and low-voltage readings of approximately 20V. Unable to fully trace the wiring on this 4-zone system, the zone panel is suspected as the fault, and further troubleshooting or repair is recommended.
Diagnosed delayed hot water delivery at two upstairs showers and inspected the aging Bradford White gas water heater, including its gas control valve, draft hood, supply and recirculation piping, and adjacent water treatment equipment. Findings indicate the aged unit is the likely cause of the slow hot water recovery, and a replacement evaluation has been scheduled with a comfort advisor.
Performed a flush and descaling of the wall-mounted tankless water heater, circulating descaling solution through the heat exchanger to remove mineral buildup and restore efficient operation. The unit, installed about a year ago, was producing hot water with no reported issues, and inspection of the connected copper supply piping, expansion tank, and inline filter housing showed no leaks, corrosion, or other abnormalities.
Performed annual heating maintenance on the furnace, gas-fired unit, and humidifier, including inspection of the heat exchanger with a borescope camera and a check of the inducer assembly. Identified a squealing inducer motor, and noted rust and corrosion along the cabinet panel seam and fasteners. An estimate for inducer motor replacement is being prepared.
Diagnosed a leaking shower and determined that the owner-supplied cartridge was not the source, as the leak was originating behind the wall. Removed the failed valve assembly and installed a new Delta shower valve body in the wall. The matching black trim kit has been ordered, and a return visit is required to install it and complete the shower valve trim-out.
Performed a biannual plumbing inspection and flushed the gas water heater to remove sediment buildup. Identified a backing-up shower drain in the master bath and cleared the blockage with a drain weasel, restoring proper flow. All fixtures and drains were verified in working order with no leaks or backups observed.
Diagnosed a leaking outdoor frost-proof spigot as failed due to age and wear. Removed the defective spigot and installed a new frost-proof hose bibb, restoring proper operation and eliminating the leak.
Performed a furnace tune-up on an 8-year-old unit, including a visual inspection of internal components. Used a borescope to inspect the heat exchanger and interior surfaces, which revealed some surface discoloration consistent with minor oxidation or corrosion deposits. No deficiencies requiring immediate repair were identified, and the system was left operational.
Responded to no cooling complaint on residential air conditioning system. Upon arrival, performed diagnostic testing on outdoor condensing unit using digital manifold gauges. System evaluation revealed low refrigerant charge as the cause of inadequate cooling performance. Documented equipment condition and refrigerant pressures with photos showing outdoor unit installation and gauge readings. Installation team scheduled to return for proper refrigerant charge correction and system restoration.
Completed annual preventative maintenance heating visit on one gas furnace (2023 model), one gas fireplace, and one humidifier. Performed comprehensive tune-up procedures including inspection of heat exchanger fins and internal ductwork components. Replaced dirty air filter with customer-supplied filter. All equipment operating within normal parameters with no deficiencies noted.
Responded to gas leak emergency at dryer connection where gas company had identified hazardous condition and shut off gas supply. Found damaged hard line to dryer and leaking gas valve in poorly accessible location. Replaced faulty gas valve and relocated to more accessible position for improved safety and future serviceability, restoring safe gas service to appliance.
Responded to multiple gas leak calls at property with two furnaces. Located and repaired gas leaks on copper flare connections at garage furnace, leak on tee fitting near meter, and drip cap on furnace bypassing Maxitrol valves at both units. Pressure tested all gas lines after repairs and confirmed system passed leak test with no further issues detected.
Responded to service call for malfunctioning water softener and iron filter system. Upon inspection, found corroded control board on water softener unit and completely plugged iron filter system. Disconnected and removed failed control board, installed warranty replacement unit, and reconnected all wiring. Verified proper electrical connections and system functionality through testing protocol. Addressed severely clogged iron filter tower by performing heavy flush and thorough cleaning to remove accumulated iron buildup and debris. Cleared plugged discharge line and restored proper drainage flow. Ran complete regeneration cycle on system and conducted water quality testing to confirm iron levels returned to acceptable parameters. All components tested and verified operational upon completion.
Completed biannual preventive maintenance plumbing inspection including draining and testing exterior faucets, water heater cleaning, sump pump inspection, and laundry hose evaluation. Inspected under-sink filtration system and noted aging equipment, though all other plumbing components found to be in good working condition. Provided estimate for replacement comfort height round toilet installation.
Completed annual cooling maintenance on 6-year-old Trane high velocity attic system. Performed comprehensive tune-up including refrigerant level verification, component testing, and operational assessment. All components tested within manufacturer specifications, refrigerant charge confirmed at proper levels, and system found to be fully operational with no deficiencies noted.
Completed comprehensive air conditioning tune-up and preventive maintenance inspection per family rewards agreement. Performed standard seasonal maintenance protocol including system diagnostics, component inspection, and operational testing of HVAC equipment. All systems operating within normal parameters with no deficiencies identified or corrective actions required.
Responded to water leak in utility room originating from pipe connected to outside faucet. Upon arrival, water supply was already shut off. Inspection revealed leaking inside hose bib valves caused by loose bleeder valve caps that had not been properly tightened. Tightened all bleeder valve caps to manufacturer specifications, resolving the leak issue.
Serviced a 5-year-old Northstar water softener system that had never received maintenance and was experiencing operational issues with iron deposits and water conditioning problems. Diagnosed and addressed electrical contact failures, replaced faulty nozzle and venturi assembly which was significantly clogged with mineral buildup. System was cycled and homeowner instructed to monitor performance before scheduling follow-up appointment to verify proper operation.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.