Since 1959 Hurlburt, we make it our mission to keep your home comfortable and protected.

Menomonie has a wide range of housing styles and ages, which creates a unique mix of heating, cooling, plumbing, and electrical needs. Older homes near downtown and the university area often still rely on aging infrastructure, while newer homes near the south side and Cedar Falls Road continue adding modern Heating and Cooling systems, generators, smart home technology, and upgraded electrical service.
A lot of plumbing work in Menomonie comes back to the age of the homes and the way the city has expanded over time. Around the older neighborhoods near downtown, Wilson Avenue, and the university area, we regularly work on aging drain lines, outdated shutoffs, older water heaters, and plumbing systems that have been modified multiple times over the years.
On the newer side of town, homeowners are often calling about water softeners, sump pumps, filtration systems, and plumbing upgrades tied to remodels and additions.
If your plumbing system is giving you problems, we can help.
The average heating and cooling repair service costs from $100 – $1,000 or more depending on what needs to be fixed. If you have a simple fan blade that is broken, your repair will be much less than it would for a condenser replacement, for instance.It’s important to always have a licensed technician fix your system; that way, you won’t have to worry about additional problems and expensive repairs down the road. Our team at Hurlburt is fully licensed and insured for you. Contact us today to learn more or to schedule your A/C repair service!
A/C and Furnace installation can cost between $4,000 – $10,000 in and around Menomonie, WI. This price includes the unit as well as labor costs. The cost will be affected by a few things:
Are you interested in a new Heating and Cooling system? Call the team at Hurlburt today for a FREE estimate!
Some common plumbing problems that many homeowners near Menomonie, WI face include:
Here at Hurlburt, we can help you with any of your home’s plumbing concerns. Just connect with one of our friendly team members today!
Electrical systems in Menomonie homes vary more than most people realize. We might spend the morning upgrading an older panel near downtown and then head out toward newer developments near Highway 12 to install EV chargers or backup generators.
A lot of older homes throughout Menomonie still operate with panels and wiring that were never designed for modern electrical demand. Once homeowners start adding newer appliances, Air Conditioning and Heating systems, or home office equipment, those limitations start showing up quickly.
Heating season in Menomonie is long enough that homeowners usually notice problems before winter is even halfway over. We spend a lot of time working on aging furnaces, older boilers, and systems that struggle to maintain even temperatures once the colder weather settles in.
Homes around the older parts of Menomonie often have airflow limitations, undersized ductwork, or heating systems that have been patched together over decades of repairs and upgrades.
Menomonie homeowners deal with completely different air quality concerns depending on the season. During the winter, homes dry out fast once the furnace runs constantly. During the summer, humidity becomes the bigger issue, especially around lower areas near Lake Menomin and the Red Cedar River.
We also see a lot of dust buildup and airflow issues in older homes with aging duct systems.
The right humidity and filtration setup can make a noticeable difference in comfort year-round.
Cooling problems in Menomonie usually come down to airflow, humidity, or older systems trying to cool homes that were never originally built for central air. We work on a lot of older houses where the AC system was added years later, which often leaves upstairs rooms warmer and airflow inconsistent.
The humidity around Menomonie can also make systems run longer than homeowners expect, especially during stretches of hot weather in July and August.
Ductless mini-splits have become a popular solution throughout Menomonie for older homes, finished basements, additions, and garages.
Menomonie is already part of our daily service area. Our technicians know the neighborhoods, the older housing stock, and the common repair issues homeowners here deal with every year.
From homes near Broadway Street and downtown Menomonie to properties closer to Cedar Falls Road and the south side developments near I-94, we are already servicing homes throughout the area every week.
Hurlburt Heating & Plumbing has completed 20 jobs in Menomonie, WI in October 2026.
The most recent job was on October 10, 2026.
Hurlburt Heating & Plumbing has completed 1,028 jobs in Menomonie, WI in the last 12 months. The first job there was in September 2015.
Responded to callback for water softener leaking following previous disconnect/reconnect service performed for HVAC installation. Upon inspection, identified the water filter as the source of the leak rather than the softener itself. Replumbed the filter housing and connections, verified all fittings were properly sealed, and conducted pressure test to confirm leak was completely resolved with no further dripping or moisture detected.
Responded to no-heat call on a 2011 Bryant high-efficiency gas furnace displaying error code 13, which initially started as code 33 before transitioning after three minutes of operation. Upon inspection, identified a failed secondary heat exchanger and tripped rollout limit switch, indicating unsafe operating conditions with potential flue gas spillage. Tagged out the furnace with lockout/tagout procedures to prevent operation due to safety hazard, documented the failed heat exchanger component with photographic evidence, and coordinated with scheduling to arrange follow-up consultation regarding replacement options.
Installed a 20" standard whole house sediment/rust filter with 1" inline connection to address water quality concerns. The filtration system was installed per estimate to capture sediment, dirt, rust, and iron, providing cleaner water throughout the residence while protecting plumbing fixtures from staining and mineral damage. System is fully operational with replacement filters available through standard suppliers.
Completed scheduled heating maintenance on a 9-year-old Daikin furnace system as part of membership agreement. Performed comprehensive tune-up including inspection of gas valve assembly, control board, electrical connections, and all mechanical components. System found operating properly with no deficiencies noted; all components functioning within normal parameters at time of service.
Responded to no-operation call following previous day's heat pump tune-up. Upon arrival, found York furnace and AC system completely non-operational. Performed electrical diagnostics and discovered furnace access door was not properly engaging the safety interlock switch on the blower section, preventing system startup. Adjusted and secured door to ensure proper latching mechanism engagement, restoring full system operation.
Performed routine preventative maintenance on a 2-year-old Lennox furnace system as part of a recurring heating maintenance agreement. Completed comprehensive tune-up inspection including verification of all electrical connections, wiring harnesses, and control components. System found to be operating within normal parameters with no deficiencies noted at this time.
Responded to service call for non-operational sump pump and sewage ejector system. Upon inspection, determined that the sewage ejector pump had failed despite being a relatively recent installation. Replaced the defective sewage ejector pump under manufacturer warranty. Installation included proper mounting of two white PVC discharge pipes with rubber couplings through the floor penetration, secured with a black rubber boot seal. Installed red shut-off valve and control box on pipe assembly for system operation and maintenance access. Tested system functionality and verified proper pump operation and discharge flow.
Completed scheduled heating maintenance on 26-year-old Amana furnace system. Upon inspection, identified active leaking from collector box and draft inducer motor, which require replacement. System is equipped with newer gas valve and control board from previous service. Comfort advisor consulted regarding collector box and draft inducer motor replacement recommendations.
Responded to service call for boiler system experiencing low water pressure and inability to reach required operating pressure. Upon inspection, diagnosed faulty automatic fill valve preventing proper system pressurization. Verified boiler water level insufficient for safe operation and confirmed autofill mechanism failure as primary cause. Documented existing plumbing configuration including copper supply lines, pressure relief components, and ventilation ductwork. Recommended and sold replacement with bell-style automatic fill valve to restore proper water feed functionality. Scheduled follow-up appointment to complete installation of new autofill valve and restore boiler to normal operating parameters.
Completed comprehensive furnace maintenance on an 18-year-old unit, including cleaning of routine components, testing of all system parts, and verification of proper equipment operation. Confirmed humidifier was functioning correctly and all systems were operating within normal parameters.
Completed scheduled heating system maintenance and furnace tune-up as part of routine preventive maintenance agreement. Performed comprehensive system inspection, documented ductwork condition with photos showing age-related deterioration and staining on supply ducts, and verified all components operating within normal parameters per manufacturer specifications.
Completed comprehensive furnace tune-up on Lennox gas furnace as part of recurring maintenance agreement. Unit is operating within normal parameters; however, inspection revealed severely rusted burner assembly requiring replacement. Provided estimate for burner assembly replacement to address corrosion issue and ensure continued safe operation.
Responded to no cool call on 3-year-old system. Upon arrival, discovered furnace disconnect switch had been inadvertently turned off by pest control service, resulting in complete system shutdown and non-responsive thermostat. Restored power to unit and verified normal operation. While on site, performed requested furnace maintenance on 7-year-old furnace including flame sensor cleaning, comprehensive electrical testing with all readings within manufacturer specifications, and filter inspection. Current filter determined to have adequate remaining service life. System restored to full operational status.
Responded to recurring upstairs bathroom tub leak reported on third service visit. Conducted comprehensive leak testing by filling tub twice with five-minute intervals between draining cycles. Performed thorough visual inspection of tub spout, overflow assembly, and valve cover while actively splashing water on all fixtures to identify potential leak sources. Verified all compression nuts were dry with no moisture present. Accessed ceiling cavity below tub to inspect drain assembly and surrounding plumbing infrastructure. During inspection, discovered loose valve cover on downstairs shower near the suspected leak area. Tightened shower faceplate securely to wall to prevent water intrusion behind shower enclosure. No active leaking observed during testing procedures. Documented findings with photos of exposed plumbing infrastructure and ceiling-mounted fixture.
Completed scheduled furnace tune-up and maintenance on Lennox gas furnace system as part of recurring heating maintenance agreement. Performed comprehensive inspection of all system components, including burner assembly, heat exchanger, ignition system, and safety controls. Verified proper operation of intake and exhaust venting through PVC piping. Inspected gas line connections and confirmed secure installation. Tested all electrical connections and verified proper voltage. System found to be operating within manufacturer specifications with no issues identified. All maintenance tasks completed successfully, and unit left in proper working condition.
Performed comprehensive preventive maintenance on Honeywell residential standby generator. Changed engine oil, replaced maintenance kit components including air filter and spark plugs. Tested automatic transfer switch functionality and monitored generator operations under load to verify proper performance and system readiness.
Responded to a leaking propane water heater in the basement. Upon inspection, determined the existing unit had developed a leak and required full replacement. Removed the old water heater and installed a new Bradford White 40-gallon LP power vent water heater. Connected all copper supply lines, installed expansion tank, and ensured proper venting configuration. Performed complete gas line pressure testing to verify system integrity and conducted operational testing to confirm proper ignition, heating function, and safety controls. All connections were secured and system left in full working order.
Responded to a leaking kitchen faucet in the mother-in-law suite where both the main faucet and sprayer were leaking during operation. Upon inspection, determined the existing kitchen faucet had reached end of life and was beyond economical repair. Removed the old faucet assembly and installed a new modern pull-down kitchen faucet with single-handle control mechanism between the double basin composite sink, restoring full functionality to the kitchen plumbing system.
Responded to no heat call on 25-year-old Lennox Dimension furnace. Upon inspection, discovered failed electrical supply to unit due to faulty switch and identified cracked heat exchanger near mounting bolt. Documented conditions with photos and advised customer that system requires replacement due to compromised heat exchanger and age of equipment. Recommended electrician for electrical repairs and comfort advisor consultation for new system installation.
Completed comprehensive furnace tune-up on 14-year-old heat pump system with no operational concerns reported. Performed full maintenance protocol including inspection of outdoor unit, removal and cleaning of intake assembly, and operational testing with 15-minute runtime verification. All components functioned within normal parameters, and system demonstrated proper heating operation throughout testing sequence.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.