Since 1959 Hurlburt, we make it our mission to keep your home comfortable and protected.
Menomonie has a wide range of housing styles and ages, which creates a unique mix of heating, cooling, plumbing, and electrical needs. Older homes near downtown and the university area often still rely on aging infrastructure, while newer homes near the south side and Cedar Falls Road continue adding modern Heating and Cooling systems, generators, smart home technology, and upgraded electrical service.
A lot of plumbing work in Menomonie comes back to the age of the homes and the way the city has expanded over time. Around the older neighborhoods near downtown, Wilson Avenue, and the university area, we regularly work on aging drain lines, outdated shutoffs, older water heaters, and plumbing systems that have been modified multiple times over the years.
On the newer side of town, homeowners are often calling about water softeners, sump pumps, filtration systems, and plumbing upgrades tied to remodels and additions.
If your plumbing system is giving you problems, we can help.
The average heating and cooling repair service costs from $100 – $1,000 or more depending on what needs to be fixed. If you have a simple fan blade that is broken, your repair will be much less than it would for a condenser replacement, for instance.It’s important to always have a licensed technician fix your system; that way, you won’t have to worry about additional problems and expensive repairs down the road. Our team at Hurlburt is fully licensed and insured for you. Contact us today to learn more or to schedule your A/C repair service!
A/C and Furnace installation can cost between $4,000 – $10,000 in and around Menomonie, WI. This price includes the unit as well as labor costs. The cost will be affected by a few things:
Are you interested in a new Heating and Cooling system? Call the team at Hurlburt today for a FREE estimate!
Some common plumbing problems that many homeowners near Menomonie, WI face include:
Here at Hurlburt, we can help you with any of your home’s plumbing concerns. Just connect with one of our friendly team members today!
Electrical systems in Menomonie homes vary more than most people realize. We might spend the morning upgrading an older panel near downtown and then head out toward newer developments near Highway 12 to install EV chargers or backup generators.
A lot of older homes throughout Menomonie still operate with panels and wiring that were never designed for modern electrical demand. Once homeowners start adding newer appliances, Air Conditioning and Heating systems, or home office equipment, those limitations start showing up quickly.
Heating season in Menomonie is long enough that homeowners usually notice problems before winter is even halfway over. We spend a lot of time working on aging furnaces, older boilers, and systems that struggle to maintain even temperatures once the colder weather settles in.
Homes around the older parts of Menomonie often have airflow limitations, undersized ductwork, or heating systems that have been patched together over decades of repairs and upgrades.
Menomonie homeowners deal with completely different air quality concerns depending on the season. During the winter, homes dry out fast once the furnace runs constantly. During the summer, humidity becomes the bigger issue, especially around lower areas near Lake Menomin and the Red Cedar River.
We also see a lot of dust buildup and airflow issues in older homes with aging duct systems.
The right humidity and filtration setup can make a noticeable difference in comfort year-round.
Cooling problems in Menomonie usually come down to airflow, humidity, or older systems trying to cool homes that were never originally built for central air. We work on a lot of older houses where the AC system was added years later, which often leaves upstairs rooms warmer and airflow inconsistent.
The humidity around Menomonie can also make systems run longer than homeowners expect, especially during stretches of hot weather in July and August.
Ductless mini-splits have become a popular solution throughout Menomonie for older homes, finished basements, additions, and garages.
Menomonie is already part of our daily service area. Our technicians know the neighborhoods, the older housing stock, and the common repair issues homeowners here deal with every year.
From homes near Broadway Street and downtown Menomonie to properties closer to Cedar Falls Road and the south side developments near I-94, we are already servicing homes throughout the area every week.
Completed comprehensive plumbing inspection of residential property including mechanical room and utility areas. Inspected AO Smith ProLine water heater, verified proper copper piping connections, shutoff valves, and plumbing infrastructure including water filtration system components. All systems found to be in operational condition with no immediate concerns identified.
Responded to no hot water complaint and diagnosed malfunctioning tanked water heater that was cycling on and immediately shutting off, indicating a failed safety control or thermostat issue. Inspected unit in unfinished basement utility area, confirmed ignition failure pattern, and evaluated overall system condition including associated plumbing connections and pressure tank. Provided customer with detailed estimate for complete water heater replacement due to age and repair cost considerations.
Completed comprehensive boiler/furnace tune-up and maintenance inspection per 12-5 agreement protocol. Customer requested thermostat replacement options for two existing units to upgrade to more user-friendly models; provided recommendations for future consideration. Prepared and submitted estimate via email for zone valve replacement, which customer plans to proceed with pending budget availability in approximately one month.
Completed comprehensive heat pump tune-up on 2-year-old Lennox system with no reported issues or operational concerns. Performed standard preventive maintenance procedures on both indoor furnace unit and outdoor condensing unit, including inspection of all major components, electrical connections, refrigerant levels, and airflow systems. All equipment operating within manufacturer specifications with no deficiencies noted.
Completed annual maintenance inspection on 9-year-old furnace and air conditioning system per membership agreement. Performed comprehensive tune-up on both units including filter replacement with AFMERV16 filter. During furnace inspection, discovered deteriorated PVC vent piping with failing silicone connections at exhaust termination that separated upon contact, indicating improper initial installation. Re-glued and secured all exhaust pipe fittings and connections to ensure proper seal and safe operation. Inspected and repaired multiple fresh air intake pipe connections showing similar deterioration. Verified proper venting system integrity upon completion. All systems tested and operating within manufacturer specifications.
Completed routine maintenance and tune-up on both furnace and air conditioning systems for non-member customer. Performed comprehensive inspection of indoor furnace unit and outdoor condenser, including filter check, electrical connections, safety controls, and airflow verification. All systems operating properly with no issues identified; customer enrolled in basic membership plan following service completion.
Completed warranty replacement of outdoor condensing unit with new Mitsubishi Electric condenser. Unit was installed on existing mounting platform with proper refrigerant line connections, electrical conduit routing, and disconnect box integration. System installation verified and unit left in operational condition.
Completed seasonal tune-up on geothermal system and discovered failed Geo Link pump on left side running excessively hot, along with pitted contactor requiring replacement. Inspected in-floor heat electric boiler which operated within normal parameters. Provided estimate for contactor replacement and initiated quote process for non-stock Geo Link pump replacement.
Responded to main sewer line backup caused by root intrusion at multiple points in the drainage system. Upon arrival, found standing water in the line indicating complete blockage. Deployed medium rigid cable machine to clear obstruction, successfully removing root masses from four separate locations throughout the main drain line. Restored full flow and drainage capacity to the system.
Responded to water leak in garage radiant floor heating system served by water heater that had been inactive for four years with no system pressure. Upon inspection, discovered bees had built nests in the piping and down the flue pipe of the water heater, creating an unsafe condition and potential fire hazard if unit were to be started. Inspected PEX distribution manifold and radiant floor heating lines for visible damage. Advised homeowner on leak detection procedure: pressurize the hydronic heating system, disable water heater operation, allow circulation pump to run, and monitor pressure over several days to determine if leak exists in the radiant floor loops. Documented condition of water heater base assembly showing significant corrosion on combustion chamber and deteriorated flue connections. Recommended complete water heater replacement due to bee infestation in flue pipe and safety concerns before attempting to restore system operation. Homeowner to decide on proceeding with re
Responded to service call regarding newly installed shower base with reported damage. Upon inspection, confirmed presence of deep scratch located at center of shower base and documented condition with photographs. Coordinated with management regarding repair options, with follow-up scheduled for professional scratch repair and refinishing of affected area.
Completed comprehensive furnace and air conditioning tune-up for non-member residential system. Performed thorough furnace inspection including flame sensor cleaning and condensate drain verification to ensure proper operation. Inspected blower wheel, which was found clean and clear of debris. Conducted electrical component testing on indoor unit with all readings within manufacturer specifications. Advised homeowner that air filter requires replacement due to excessive dirt accumulation. Proceeded to outdoor condensing unit where access panels were removed for complete service. Pressure washed condenser coils to remove dirt and debris, restoring proper heat transfer efficiency. Tested all electrical connections and components at outdoor unit, confirming proper operation and safe connections. Performed operational testing of both systems under load conditions. Furnace startup and run cycle completed successfully with temperature rise measured at 55°F across heat exchanger, indicating
Responded to no hot water complaint and diagnosed a failed 40-gallon natural gas tanked water heater of unknown age that stopped operating over the weekend. Upon inspection, discovered additional electrical issues affecting certain areas of the home. Provided estimate for water heater replacement and coordinated scheduling for licensed electrician to address the electrical power loss in affected circuits.
Responded to customer request for water quality assessment. Collected water sample from existing treatment system for laboratory analysis. System consists of water softener unit and blue storage/treatment tank with associated copper piping, pressure gauge, and valve assembly. Observed signs of moisture accumulation on concrete floor near tank base with collection bucket in place beneath plumbing connections, indicating potential minor leak or condensation issue that may require follow-up once lab results are received to determine if additional treatment or system adjustments are needed.
Completed comprehensive annual plumbing inspection of residential property. Replaced malfunctioning exterior sillcock and identified yard hydrant requiring repair kit and new head assembly due to leaking conditions. Inspected basement plumbing systems including water heater, pressure tank, and associated piping connections. Evaluated multiple outdoor water fixtures and documented corrosion on vintage spigot hardware. Recommended replacement of toilets and new cartridge installation for upstairs bathtub fixture to address performance issues. Documented existing conditions with photographic evidence showing aging infrastructure, corroded outdoor faucets, and basement mechanical equipment requiring monitoring.
Completed comprehensive maintenance on two 8-year-old mini split systems. Performed operational testing, cleared condensate drain lines, and thoroughly washed condenser coils. Inspected unit for rodent intrusion and confirmed air filters had been previously cleaned. Verified system performance with temperature differential measuring 15-16 degrees across the coil, indicating proper cooling capacity. Recommended interior evaporator head cleaning for optimal efficiency.
Performed comprehensive AC tuneup on Lennox system. Inspected air filter and found it slightly dirty but serviceable. Flushed evaporator drain line and removed debris from drain pan. Removed outdoor unit panels to inspect all electrical components and connections, which were found to be in good condition. Cleaned and rinsed condenser coils thoroughly. Reassembled unit and verified system operation with 22-degree temperature split across evaporator coil, confirming proper cooling performance.
Responded to service call for leaky shower faucet and whole house water filter canister. Inspected both fixtures, assessed the source of leaks, and provided detailed estimates for repairs including shower valve replacement and filter housing O-ring or canister replacement. Customer declined all repair estimates at this time.
Completed comprehensive tune-up service on both furnace and air conditioning systems as part of a buy-one-get-one maintenance package. Performed standard system inspections, component checks, and preventive maintenance procedures on both heating and cooling equipment per manufacturer specifications, with all findings documented on service forms.
Responded to water leakage complaint from Lennox furnace unit installed two years prior. Upon inspection, discovered evaporator coil drain pan was full and overflowing onto floor. Identified blockage in MPT to barb fitting at drain pan outlet caused by accumulated debris and gunk. Removed and cleaned elbow fitting, flushed remaining sediment from drain pan, and verified proper drainage flow was restored. System operational with condensate draining correctly.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.