Hudson’s housing market looks very different from many communities across western Wisconsin. Near Historic Downtown Hudson, the Octagon House Museum, and the St. Croix River, you’ll find homes that have stood for generations. Travel toward County Road F, County Road A, Heritage Greens, or the Troy Burne area, and you’ll see neighborhoods built within the last two decades featuring advanced Air Conditioning and Heating systems, smart home technology, and increasingly sophisticated electrical infrastructure.
That variety creates very different service needs from one property to the next. On any given day, our technicians may be servicing a boiler in an older riverfront home, installing a whole-home generator in a newer subdivision, or helping a homeowner improve humidity control in a house overlooking the St. Croix Valley. Understanding how Hudson has grown allows us to make recommendations that fit the specific home rather than offering a one-size-fits-all solution.
When homeowners in Hudson call about cooling problems, temperature is often only part of the story. Humidity plays a major role in how comfortable a home feels, particularly for properties located closer to the St. Croix River, North Hudson, and other lower river valley areas. Even when temperatures remain reasonable, excess moisture can leave a home feeling uncomfortable and force air conditioning systems to work harder than necessary.
Many homeowners assume they need a larger air conditioner when the real issue is humidity management, airflow design, or aging equipment that is no longer operating efficiently. We regularly help homeowners improve comfort while reducing energy usage by addressing the actual cause of the problem.
Whether your air conditioner struggles to keep up, certain rooms stay warmer than others, or humidity becomes a constant frustration, our team can help identify the right solution.
Hudson homeowners deal with two very different air quality challenges throughout the year. During the summer, humidity can make homes feel damp and uncomfortable. During the winter, months of furnace operation can leave indoor air excessively dry, affecting comfort throughout the home.
Many homeowners are surprised by how much indoor air quality impacts their day-to-day comfort. Dust buildup, inconsistent humidity levels, pet dander, and poor airflow often contribute to issues that homeowners mistakenly blame on their heating or cooling equipment.
The right combination of filtration and humidity control can improve comfort, protect furnishings, and help AC and Heating equipment perform more efficiently throughout the year.
Anyone who has spent a winter in Hudson understands how quickly conditions can change. One week may bring relatively mild temperatures, while the next delivers subzero wind chills and significant snowfall. Those rapid weather swings place tremendous stress on heating equipment and expose weaknesses that may have gone unnoticed earlier in the season.
For many Hudson residents, reliability is just as important as efficiency. A large percentage of local homeowners commute daily along Interstate 94 into Minneapolis or St. Paul. Nobody wants to return home after a long day to discover the furnace stopped working hours earlier. That is why preventative maintenance and proactive system upgrades remain such a priority throughout the area.
Whether you’re maintaining an existing system or evaluating replacement options before winter arrives, we can help you make a confident long-term decision.
Hudson’s continued growth has created increasing demand for electrical upgrades. Newer homes often include electric vehicles, home offices, smart home systems, advanced Heating and Air Conditioning equipment, and entertainment systems that place greater demands on electrical infrastructure than homes built decades ago.
We continue to see strong demand for panel upgrades, backup generators, surge protection, and EV charger installations throughout neighborhoods like Willow River, Troy Burne, Stone Pine, and newer developments along County Road F. Many homeowners are choosing to make these upgrades proactively rather than waiting for electrical limitations to become major problems.
Whether you’re planning future upgrades or dealing with an existing electrical concern, our team can help ensure your system is ready for today’s demands.
Many Hudson homes feature finished basements, updated living spaces, and valuable personal property that can be vulnerable to water damage. Between spring storms, heavy rainfall, frozen pipes, aging water heaters, and sump pump failures, plumbing issues can become expensive very quickly if not addressed promptly.
We regularly help homeowners protect their homes through preventative plumbing improvements, water quality upgrades, and fast repairs when problems occur. Whether you’re in a newer development or an older home near downtown, protecting your plumbing system helps protect the value of your property.
From water heater replacements and filtration systems to emergency leak repairs and sump pump installations, we help homeowners prevent small problems from becoming major repairs.
Hurlburt Heating & Plumbing has completed 20 jobs in Hudson, WI in May 2026.
The most recent job was on May 22, 2026.
Responded to a water leak at the Rusco filter assembly that developed following a previous filter replacement. Upon inspection, identified a small leak at the ball valve connection located below the Rusco filter housing. The issue was caused by insufficient tightening of the ball valve during the prior service. Tightened down the ball valve to proper torque specifications, eliminating the leak. Verified all connections at the clear cylindrical filter housing and associated copper piping with brass fittings for proper seal integrity. System tested and confirmed leak-free operation.
Performed comprehensive air conditioning tune-up and system evaluation. Tested AC operation under ambient conditions, verified clean air filter, cleared condensate drain line, and measured 17° temperature differential across the evaporator coil. Inspected blower assembly for proper operation. Cleaned outdoor condenser coil and performed component inspection, identifying pitted contactor and weakening capacitor on compressor circuit. Provided recommendations for capacitor and contactor replacement to ensure continued reliable operation.
Performed comprehensive preventive maintenance tune-up on Lennox EL18XCVS036 air conditioning system. Removed condenser panels and thoroughly rinsed coil assembly to ensure optimal heat transfer efficiency. Conducted complete electrical inspection including voltage, amperage, and connection integrity—all components found within manufacturer specifications. Verified indoor air filter condition, inspected evaporator drain line for proper drainage flow, and confirmed system startup with proper operation achieving 20-degree temperature split across the coil.
Replaced failed pressure switch on well pump system after discovering the existing switch and nipple were completely obstructed with heavy sediment buildup. Cleared the clogged switch nipple to restore proper water flow and installed new 40-60 PSI pressure switch compatible with existing submersible well pump connections. The new switch is factory-set to signal pump start at 40 PSI and stop at 60 PSI. Documented extensive mineral deposits and corrosion throughout the system components. Advised that if sediment issues continue, replacement of the pressure tank and tank tee assembly may be necessary to prevent future failures.
Completed annual plumbing inspection identifying multiple items requiring attention. Inspected under-sink plumbing connections, P-trap configuration, and supply lines, all functioning properly. Identified recirculation pump, shower trim assembly, and pressure reducing valve (PRV) as items needing service or replacement, with estimates prepared for necessary repairs.
Responded to call for water heater leaking from bottom with intermittent hot water issues. Upon inspection, determined the leak was not originating from the water heater unit itself, but from failed CPVC piping located above the water heater in the joist cavity. Replaced the defective CPVC section with new piping and fittings to restore proper system integrity and eliminate the leak.
Completed annual air conditioning maintenance tune-up on 6-year-old system. Rinsed condenser coil to remove debris and improve heat transfer efficiency. Installed hard start kit to reduce compressor startup strain and extend equipment lifespan.
Performed routine AC maintenance tune-up on Trane XE 1000 condenser unit utilizing R22 refrigerant. Identified system freezing issue caused by pitted contactor that was burning the 24-volt control wiring. Replaced failed contactor, repaired damaged low-voltage wiring, and completed full system inspection with borescope documentation of internal components to restore proper cooling operation.
Completed comprehensive AC maintenance tune-up on 18-year-old system per recurring maintenance agreement. Unit exhibited multiple concerns including tilted condenser positioning, questionable refrigerant levels, and inadequate cooling performance as reported by homeowner. Performed full system inspection, coordinated comfort advisor consultation for system evaluation, and executed refrigerant recharge to restore proper operating levels. Inspected and documented clean air filter with proper installation and examined condenser coil condition showing signs of age-related wear. System brought to optimal operating parameters within manufacturer specifications.
Performed routine maintenance tune-up on a 14-year-old Day & Night air conditioning condenser unit. System inspection revealed significant dirt accumulation affecting airflow and efficiency, requiring thorough cleaning of condenser coil and components. Electrical cabinet inspection identified an out-of-range capacitor that could cause compressor and fan motor failure, potentially resulting in no-cool condition. Replaced defective capacitor to restore proper electrical function and prevent system breakdown. Verified all electrical connections, refrigerant service ports, and operational components for proper function. System tested and returned to service with all components operating within normal parameters.
Completed annual air conditioning maintenance and tune-up on a 3-year-old residential HVAC system. Performed comprehensive inspection of all system components, including air handler, condensate drainage lines, electrical connections, and ductwork. Cleaned outdoor condenser unit by rinsing down coils and exterior components to ensure optimal heat transfer and system efficiency. All equipment found operating within normal parameters with no deficiencies noted.
Responded to a plumbing emergency involving a pinhole leak beneath a jacuzzi tub that was causing water damage in the basement below. Upon inspection, identified that the valve body for the hot water handle was leaking. Shut off water supply to the tub to prevent further damage and allow the homeowner to proceed with drywall repairs. Documented the valve body failure, submitted parts order form for replacement components, and protected the work area with plastic sheeting during assessment and repair preparation.
Completed seasonal AC tune-up maintenance on an 8-year-old air conditioning system. Performed comprehensive inspection of all system components, including evaporator coil assembly and heat exchanger fins. Verified proper system operation with temperature readings showing 64.9°F at supply ductwork. Cleaned exterior condenser coils to remove accumulated debris and ensure optimal heat transfer efficiency. All components inspected and found to be in proper working order with no deficiencies noted. System operating within normal parameters and ready for continued service.
Responded to water leak on boiler installed in January. Upon inspection, identified loose brass fittings on ball valves connected to copper piping at the new installation. Tightened all compromised fittings and connections to restore proper seal and eliminate active leak.
Completed comprehensive plumbing inspection of residential system. Water heater and pressure tank both showing signs of age and wear, recommended replacement of both units for optimal system performance. Identified that Rosco filter requires replacement and discovered that shut-off valves (stops) beneath nearly all faucets are seized in the open position, limiting ability to isolate fixtures for future maintenance or repairs.
Responded to no heat call on 30+ year old furnace in residential system located in commercial property. Upon inspection, found blower motor operating with excessive noise and vibration causing unit to shake. Heat exchanger exhibited severe deterioration with visible cracking and material degradation, presenting safety concerns. Documented extensive damage to heat exchanger with photos showing significant rust, corrosion, and structural compromise. Due to age of equipment, critical condition of heat exchanger, and failed blower motor, recommended full system replacement over repair. Coordinated with sales team to provide replacement quote given unsafe operating conditions and cost-prohibitive nature of repairs on unit exceeding expected service life.
Performed maintenance inspection on residential AC system located in attic space. During diagnostic testing with multimeter, identified faulty control board failing to supply 24-volt power to blower motor, preventing proper system operation. Documented equipment make, model, and serial number information with photographs as requested. Provided estimate for control board replacement and awaiting customer approval to proceed with repair.
Completed scheduled AC tune-up on 12-year-old FRP unit experiencing reduced capacity. Performed comprehensive system inspection, replaced failed capacitor, and installed new air filter to restore proper airflow and system performance.
Performed comprehensive annual maintenance on 2-year-old residential air conditioning system per maintenance agreement. Inspected evaporator coil, refrigerant lines, and all HVAC components in mechanical space. Verified proper operation of furnace/air handler unit, checked condensate drainage system, and confirmed all electrical connections were secure. System operating within normal parameters with no issues identified.
Completed comprehensive plumbing inspection of residential utility area and basement mechanical systems. Assessed condition of water supply lines, drainage systems, gas piping, and HVAC-related plumbing connections, documenting findings with photographic evidence. Inspection revealed aging infrastructure with concrete deterioration, moisture concerns, and various utility connections requiring monitoring for future maintenance planning.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.