Hudson’s housing market looks very different from many communities across western Wisconsin. Near Historic Downtown Hudson, the Octagon House Museum, and the St. Croix River, you’ll find homes that have stood for generations. Travel toward County Road F, County Road A, Heritage Greens, or the Troy Burne area, and you’ll see neighborhoods built within the last two decades featuring advanced Air Conditioning and Heating systems, smart home technology, and increasingly sophisticated electrical infrastructure.
That variety creates very different service needs from one property to the next. On any given day, our technicians may be servicing a boiler in an older riverfront home, installing a whole-home generator in a newer subdivision, or helping a homeowner improve humidity control in a house overlooking the St. Croix Valley. Understanding how Hudson has grown allows us to make recommendations that fit the specific home rather than offering a one-size-fits-all solution.
When homeowners in Hudson call about cooling problems, temperature is often only part of the story. Humidity plays a major role in how comfortable a home feels, particularly for properties located closer to the St. Croix River, North Hudson, and other lower river valley areas. Even when temperatures remain reasonable, excess moisture can leave a home feeling uncomfortable and force air conditioning systems to work harder than necessary.
Many homeowners assume they need a larger air conditioner when the real issue is humidity management, airflow design, or aging equipment that is no longer operating efficiently. We regularly help homeowners improve comfort while reducing energy usage by addressing the actual cause of the problem.
Whether your air conditioner struggles to keep up, certain rooms stay warmer than others, or humidity becomes a constant frustration, our team can help identify the right solution.
Hudson homeowners deal with two very different air quality challenges throughout the year. During the summer, humidity can make homes feel damp and uncomfortable. During the winter, months of furnace operation can leave indoor air excessively dry, affecting comfort throughout the home.
Many homeowners are surprised by how much indoor air quality impacts their day-to-day comfort. Dust buildup, inconsistent humidity levels, pet dander, and poor airflow often contribute to issues that homeowners mistakenly blame on their heating or cooling equipment.
The right combination of filtration and humidity control can improve comfort, protect furnishings, and help AC and Heating equipment perform more efficiently throughout the year.
Anyone who has spent a winter in Hudson understands how quickly conditions can change. One week may bring relatively mild temperatures, while the next delivers subzero wind chills and significant snowfall. Those rapid weather swings place tremendous stress on heating equipment and expose weaknesses that may have gone unnoticed earlier in the season.
For many Hudson residents, reliability is just as important as efficiency. A large percentage of local homeowners commute daily along Interstate 94 into Minneapolis or St. Paul. Nobody wants to return home after a long day to discover the furnace stopped working hours earlier. That is why preventative maintenance and proactive system upgrades remain such a priority throughout the area.
Whether you’re maintaining an existing system or evaluating replacement options before winter arrives, we can help you make a confident long-term decision.
Hudson’s continued growth has created increasing demand for electrical upgrades. Newer homes often include electric vehicles, home offices, smart home systems, advanced Heating and Air Conditioning equipment, and entertainment systems that place greater demands on electrical infrastructure than homes built decades ago.
We continue to see strong demand for panel upgrades, backup generators, surge protection, and EV charger installations throughout neighborhoods like Willow River, Troy Burne, Stone Pine, and newer developments along County Road F. Many homeowners are choosing to make these upgrades proactively rather than waiting for electrical limitations to become major problems.
Whether you’re planning future upgrades or dealing with an existing electrical concern, our team can help ensure your system is ready for today’s demands.
Many Hudson homes feature finished basements, updated living spaces, and valuable personal property that can be vulnerable to water damage. Between spring storms, heavy rainfall, frozen pipes, aging water heaters, and sump pump failures, plumbing issues can become expensive very quickly if not addressed promptly.
We regularly help homeowners protect their homes through preventative plumbing improvements, water quality upgrades, and fast repairs when problems occur. Whether you’re in a newer development or an older home near downtown, protecting your plumbing system helps protect the value of your property.
From water heater replacements and filtration systems to emergency leak repairs and sump pump installations, we help homeowners prevent small problems from becoming major repairs.
Hurlburt Heating & Plumbing has completed 20 jobs in Hudson, WI in June 2026.
The most recent job was on June 16, 2026.
Responded to non-functioning washing machine shut-off valves that were experiencing leaks. Replaced both defective boiler drain-style shut-off valves with new brass quarter-turn ball valves featuring blue handles, installed in recessed wall box between studs. Both valves were connected to existing copper supply lines serving the laundry area, restoring proper water control and eliminating leaks.
Responded to water leak behind dishwasher caused by pinhole in copper supply line. Removed and replaced 10 feet of deteriorated copper piping with PEX tubing, ensuring proper connections and system integrity. Tested installation for leaks and verified proper water flow to dishwasher upon completion.
Completed comprehensive AC maintenance tune-up on 10-year-old system equipped with hard start kit. Performed full system inspection, verified proper operation of all components including condenser unit electrical connections and controls, confirmed system functionality, and documented equipment condition with photos showing water heater installation and outdoor condensing unit wiring assembly.
Performed comprehensive AC maintenance tune-up on 25-year-old system as part of monthly maintenance agreement. System found to be low on refrigerant and compressor drawing high amperage, indicating potential compressor failure. Measured capacitance readings at 39.65 ÎĽF and inspected evaporator coil condition, documenting moisture accumulation and component wear. Coordinated with comfort advisor for system replacement estimate and heat exchanger evaluation due to age and performance concerns.
Completed repair work on exterior water line system including replacement of two frost-free hose bibbs and correction of crawl space leak. Removed failed plastic tee fitting and installed new brass tee fitting utilizing existing copper connections. Installed two new frost-free hose bibbs at exterior locations, ensuring proper pitch and drainage to prevent freeze damage. All work performed in crawl space required careful maneuvering in confined space conditions. System tested and verified leak-free upon completion with all fixtures operating properly.
Responded to warranty call for recently installed condenser unit. Upon inspection, discovered compressor was not secured to mounting pad and refrigerant lines were bent, preventing proper installation of mounting bolts. Additionally found service valve caps missing from both ports. Documented conditions with photographs showing unsecured compressor, bent copper lines, debris accumulation in unit base, and exposed service valves. Unit currently operational but requires follow-up visit to properly secure compressor, straighten or replace refrigerant lines as needed, and install proper service valve caps. Submitted work order for corrective action and scheduled callback with customer.
Responded to water leak complaint with visible ceiling damage below shower area. Upon inspection, identified potential source as loose shower head causing water spray directed upward at ceiling, with moisture migrating into attic space. Homeowner declined ceiling access for further investigation; advised to monitor condition and observe correlation between shower usage and water staining patterns.
Responded to service call for Kohler DTV electronic shower system approximately 6 years old with no hot water output. Performed diagnostic inspection of the digital thermostatic valve assembly, checking water flow and inspecting inlet screens for debris or blockage. Verified proper water supply pressure to both hot and cold lines and confirmed all shut-off valves were fully operational. Inspected plumbing manifold connections, PEX supply lines, and electrical components within wall cavity. All screens were clear and water flow was adequate to system. Based on diagnostic findings and consultation with manufacturer support, determined thermistor sensor requires replacement. Customer will order OEM thermistor part directly and schedule follow-up appointment for installation of component.
Completed recurring plumbing inspection and addressed leaking outdoor hose bibb that was spraying water from the top connection. Removed and replaced defective hose bibb with new unit, ensuring proper seal and function. Interior plumbing fixtures including toilet, sink, and bathtub were inspected and photographed as part of routine maintenance evaluation.
Responded to mechanical room floor drain backup occurring during laundry use. Verified customer concern and traced drainage system configuration. Identified that both floor drain and laundry drain discharge into a sewage ejection pump/lift station assembly. Inspected ejection pump tank and found it filled to capacity with wastewater. Diagnosed pump failure as root cause of drainage backup. Documented pump malfunction with photographic evidence showing corroded drain assembly, accumulated sediment, and pump components including actuator stem and discharge piping. Referred job to licensed plumbing contractor for pump repair or replacement as no corrective work was performed during diagnostic visit.
Responded to kitchen sink drain failure where the tailpiece assembly had separated from the basket strainer connection. Upon inspection, found the threaded pipe connection had failed due to age-related corrosion on the metal fittings, though the tailpiece itself remained in serviceable condition. Replaced the corroded nut and threaded connection components leading to the basket strainer while retaining the existing tailpiece. Reassembled the drain assembly, ensuring proper alignment with the existing P-trap configuration and garbage disposal connection. Tested the system for leaks and verified proper drainage function before completing the repair.
Completed comprehensive air conditioning maintenance tune-up on Lennox outdoor condenser unit. Performed full system inspection including air filter evaluation, evaporator drain verification, coil cleaning, and electrical component check. Removed access panels, rinsed condenser coils, extracted debris and leaves from unit bottom, and verified all wiring connections were secure with no evidence of rodent intrusion. System startup confirmed proper operation with 20-degree temperature differential across the evaporator coil, indicating optimal cooling performance.
Completed preventive maintenance tune-up on air conditioning system under agreement. Verified temperature splits across evaporator coil and confirmed system operating within manufacturer specifications. Performed thorough cleaning of outdoor condenser unit, removing debris and buildup from coil fins and housing. Inspected air filter and advised replacement needed soon due to dirt accumulation. All components inspected with no deficiencies or operational concerns identified at this time.
Completed preventive maintenance on a 7-10 year old residential air conditioning system. System was operating and cooling properly at time of service. Outdoor condenser coil had significant cottonwood accumulation which was thoroughly cleaned to restore proper airflow and heat transfer efficiency. Inspected and verified air filter was clean with adequate airflow. Checked all electrical connections and confirmed secure terminations throughout the system. All components tested within normal operating parameters with no deficiencies noted.
Installed customer-supplied Kohler kitchen sink faucet, ensuring proper mounting and connection to water supply lines. Repaired leaking hose bibb shut-off valve in basement by tightening the packing gland to stop dripping. Tested all fixtures upon completion to verify proper operation with no leaks present.
Responded to a leak complaint on a recently replaced outdoor spigot that was dripping from the packing nut behind the handle when a hose was connected. Upon inspection, determined the packing nut had loosened during normal operation. Tightened the packing nut to proper torque specification, resolving the leak completely with no additional repairs required.
Responded to no hot water condition caused by failed gas valve on existing water heater. Removed and properly disposed of original unit. Installed new 50-gallon natural gas standard vent water heater in basement mechanical room in place of like unit. Connected yellow flexible gas line, white PVC venting, and all water supply lines per code. Verified proper clearances from furnace and other mechanical equipment. Tested all connections for leaks, confirmed proper venting operation, and verified hot water delivery throughout residence. Permit obtained and installation completed to current plumbing code requirements.
Completed routine Family Rewards cooling maintenance visit on approximately 2-year-old AC system. Performed comprehensive tune-up inspection, verified all components operating within normal parameters, confirmed system cleanliness and proper function with no issues identified or repairs required.
Responded to warranty service call for non-functioning outdoor unit. Diagnosed failed condenser fan motor and replaced with new motor under full parts and labor warranty coverage. Verified all electrical connections, tested system operation, and confirmed proper function of replacement fan motor upon completion.
Responded to water leak in basement occurring when outside spigot was activated. Upon inspection, identified leak at lawn faucet and associated valve. Removed defective lawn faucet and faulty valve, then installed new lawn faucet and valve to restore proper function and eliminate water intrusion. Discussed future mini split system installation with homeowner.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.