AC, Furnace, Plumbing, and Electrical Company in Chaska, MN

Since 1959, our promise has been simple: provide honest, dependable service that helps homeowners protect what matters most.

Hurlburt is Chaska’s premier AC, Furnace, Plumbing and Electrical company. Hurlburt has served the region since 1959 and has over 10,000, 5 star reviews to show for it. Rely on us for routine inspections and maintenance that help keep your costs low and your home’s comfort systems healthy. When you need an AC repair or a furnace tune-up we’re here for you. Hurlburt’s expert service advisors can help you determine if you would benefit from replacing and aged furnace or air conditioner or moving forward with a repair. If your system is >15 years old and a basic low efficiency model, it may make sense to look at the costs to replace and the monthly utility savings, combined with the better performance and increased home comfort. That math can help make the decision on wether to fix or replace your aging AC and furnace. Chaska can have some pretty severe storms and whole home back up generators are a comforting solution to keeping your home running normally during a power outage. Contact Us to learn more about how your family could benefit from backup-power. Click to learn more about our specific HVAC and IAQ services. Click to learn more about our specific Plumbing services. When you need an electrical, plumbing, or HVAC company in Chaska, Hurlburt is the one you can trust. Call today with any questions about our products and services.

Customized Home Furnace Solutions

Keep your home a warm, comfortable oasis even on the coldest days in Chaska. We offer heating solutions perfect for homes from Hickory Park to the Minnesota River Bluffs trail, including fuel-based and electric systems tailored to your residence. Our furnace repair and maintenance services will ensure your heating investments continue to provide you with efficient, consistent comfort.

See our specific HVAC and IAQ services.

Heating Services We Offer Include

Furnace Repair: Our technicians can correct all heating problems, including issues with the fuel line, combustion, and blower. Enjoy peace of mind that your furnace will work reliably no matter how cold it gets outside.

Furnace Installation: Most households in the region have fuel-burning heating systems, such as furnaces and boilers. We offer options to make them more efficient, including programmable thermostats, humidifiers, zoning, and solar power integration.

Furnace Maintenance: A fall tune-up is the best way to lower your heating costs and ensure your system doesn’t break down this winter. We also offer the Hurlburt Family Rewards Program which includes a tune-up at a discount while providing you with many other benefits.

Indoor air quality

Home Cooling Installation & Service

The cooling needs for area households can vary greatly from one home to the next. We can help you explore the options that will keep you comfortable all summer long. Whether you have a central air system that needs repairs or you’re interested in a ductless mini-split installation, we can assist you. Our reliable HVAC service teams ensure you’re never without AC on a humid day.

Our Cooling Services Include

AC Repair: Uneven cooling and high humidity levels aren’t issues you should have to deal with. Our technicians can get to the root of the problem and restore your cooling to optimal levels.

AC Replacement: There are many cooling installation options, including ductless mini-splits, central air conditioners, and heat pumps. Many of these solutions are ENERGY STAR-certified and eligible for rebates, tax credits, and other incentives.

AC System Maintenance: The Hurlburt Family Rewards Program is the best way to lower your AC costs and service your system on schedule. Better yet, when it’s time for a replacement, 100% of your membership fees up to $1,000 will be applied to the cost of the new system.

Licensed Plumbers for Your Home

You need plumbing experts who live in homes that face the same challenges you do. That’s what you get when you choose us as your residential plumbing contractor. We specialize in a wide range of plumbing services, including timely repairs, water-saving upgrades, and comprehensive inspections. You can count on us to keep your plumbing in good working order!

See our specific Plumbing services.

Turn to Us for the Following Plumbing Services

Plumbing Repair: Households in the area often need water softener repairs, such as changing out filters and resin beads. Fixing leaking fixtures and running toilets can eliminate costly water waste. Our team also helps homeowners in the area diagnose and fix low water pressure.
Plumbing Installation: Our plumbers install single- and dual-tank water softeners along with water purifiers and conditioners. Customers can upgrade their kitchens with new faucets, aerators, sinks, garbage disposals, and pot fillers. Our team also enhances bathrooms with touchless faucets, many different showerheads, and low-flow, dual-flush toilets. Ask us about our water heaters!

AC, Furnace, Plumbing, and Electrical Company <span>in Chaska, MN</span>

Local Electricians

Enjoy a safe and efficient electrical system with expert services from Hurlburt! Our electricians handle everything from minor repairs to whole-home electrical remodels. Whether your outlets need replacing or you’re noticing flickering lights, we’ll be there to help you. We also step in to provide electrical upgrades like whole-home surge protection or install EV chargers.

Lights Flickering? Trust Our Electrical Services

Electrical Repair: Dead outlets, switches, and dimmers are among the most common repairs we perform. You need to be especially careful with outlets that have burn marks or get hot to the touch. You also shouldn’t ignore electric panels that buzz loudly or if you experience frequently tripped breakers.

Electrical Installation: Whole-home surge protection is a common upgrade, and many older homes may need a full panel replacement to achieve this. Panel work is an excellent time to add circuits along with lighting, outlets, and more. You can also add ceiling fans for added lighting and increased airflow. Ask us about other electrical installation services!

Quality Small Town Services

The motto in Chaska is “community & relationships,” and we embrace that spirit with our approach to our home services. Our goal is to deliver customers maximum comfort and an exceptional experience. With updated natural gas infrastructure around the city, many area residences may be considering gas furnaces, which is energy-efficient and cost-effective. Still, local heating costs are substantial, and you may want to explore ways to lower them. That includes smart thermostats, hybrid heating, condensing systems, zone control, and solar power.

Water hardness in the city is about five times the national average. You may have hard water whether you live downtown or near the National Wildlife Refuge due to our proximity to the Minnesota River and many nearby lakes. If you’re unsure how hard your water is, we can test it. Our plumbers can then explore whether you need a water softener. If you do, that system can lower water heater costs and protect your pipes, fixtures, and other appliances.

Chaska has a city-owned electric utility known for fast response times. Still, our city is no stranger to extended power outages due to harsh winter weather. That’s why a whole home standby generator is such a good investment, whether living on North Chestnut Street or at the edge of town. The smallest generators provide essential coverage, including lights, heating, and refrigeration. We also offer larger systems that give you managed whole-home coverage.

We Serve the Following Chaska Communities

Jonathan
Clover Ridge
Autumn Woods
Chevalle

We’re Your Chaska HVAC Company and More!

Welcome to the Hurlburt Family! Hurlburt has over six decades of experience servicing homes just like yours. When you call us for an HVAC technician, plumber, or electrician, we’ll answer. Our customer-service approach has earned us an A+ BBB rating and more than 10,000 five-star reviews online. We offer a rewards program that covers your electrical, HVAC, and plumbing systems. Our company backs all services with a 12-month warranty on all labor and parts. For new installations and replacements, we offer free quotes and financing, subject to credit approval.

Hurlburt is proud to be a top electrical, plumbing, and HVAC company in Chaska. Contact us at your convenience to schedule an electrician, a plumber, or a technician.

Recent Jobs and Reviews in Chaska, MN

Chaska, MN at a glance

Hurlburt Heating & Plumbing has completed 20 jobs in Chaska, MN between September 2026 and October 2026.

The most recent job was on October 30, 2026.

Hurlburt Heating & Plumbing has completed 75 jobs in Chaska, MN in the last 12 months.

Job Locations and Reviews

Performed a comprehensive maintenance inspection on a 16-year-old York gas furnace, verifying ignition and flame safety, gas valve, draft motor, control board, blower motor, and amp draws all within normal operating parameters. Combustion analysis and temperature rise were within manufacturer specifications, and the heat exchanger showed no failure but exhibited heat stress around the bends and should be monitored. Replaced the air filter and reviewed available options with the homeowner.

Moe R. Checked in 20 hours ago

Performed a comprehensive maintenance inspection on a 16-year-old York gas furnace, verifying ignition and flame safety, gas valve, draft motor, control board, blower motor, and amp draws all within normal operating parameters. Combustion analysis and temperature rise were within manufacturer specifications, and the heat exchanger showed no failure but exhibited heat stress around the bends and should be monitored. Replaced the air filter and reviewed available options with the homeowner.

Chaska, MN 55318

$Diagnosed a no-heat condition on a 16-year-old furnace and determined the control board had failed, with the draft inducer motor relay delivering fractional voltage to the motor. Replaced the control board and verified all remaining components were operating correctly. Post-repair, the left burner flame appeared weak, indicating a probable restricted secondary heat exchanger, though borescope inspection found no visible evidence; reviewed replacement options with the homeowner.$

Moe R. Checked in 2 days ago

Diagnosed a no-heat condition on a 16-year-old furnace and determined the control board had failed, with the draft inducer motor relay delivering fractional voltage to the motor. Replaced the control board and verified all remaining components were operating correctly. Post-repair, the left burner flame appeared weak, indicating a probable restricted secondary heat exchanger, though borescope inspection found no visible evidence; reviewed replacement options with the homeowner.

Chaska, MN 55318

Diagnosed a recurring kitchen sink backup caused by a blockage of food debris and sludge. Disassembled the drain and cabled the line its full length, clearing the obstruction at approximately 30 feet, then ran water while cabling the remainder to flush debris from the line. Reassembled the drain and verified proper drainage with no leaks; recommended replacing the under-sink Studor vent, which has a 10-year service life.

Kyle F. Checked in 2 days ago

Diagnosed a recurring kitchen sink backup caused by a blockage of food debris and sludge. Disassembled the drain and cabled the line its full length, clearing the obstruction at approximately 30 feet, then ran water while cabling the remainder to flush debris from the line. Reassembled the drain and verified proper drainage with no leaks; recommended replacing the under-sink Studor vent, which has a 10-year service life.

Chaska, MN 55318

Performed a complete tune-up on a 13-year-old Goodman furnace, verifying ignition and flame safety, gas valve operation, gas pressure, filter condition, blower wheel cleanliness, and control board function, and priming the condensate drain trap. Combustion analysis and temperature rise were within specification; however, flame impingement at the heat exchanger entrance is corroding the front plate, so this area should be monitored for cracking. Recommended relocating nearby shelving and the battery backup to allow clear filter access.

Moe R. Checked in 7 days ago

Performed a complete tune-up on a 13-year-old Goodman furnace, verifying ignition and flame safety, gas valve operation, gas pressure, filter condition, blower wheel cleanliness, and control board function, and priming the condensate drain trap. Combustion analysis and temperature rise were within specification; however, flame impingement at the heat exchanger entrance is corroding the front plate, so this area should be monitored for cracking. Recommended relocating nearby shelving and the battery backup to allow clear filter access.

Chaska, MN 55318

Inspected the metered water softener system, including the control valve head, brine tank, and associated plumbing, in response to reported non-operation. Diagnosed that the softener no longer cycles through all regeneration modes, indicating a malfunction within the control valve and/or its drive components; the unit is not functioning as intended and requires repair to restore proper regeneration operation.

Matt M. Checked in 9 days ago

Inspected the metered water softener system, including the control valve head, brine tank, and associated plumbing, in response to reported non-operation. Diagnosed that the softener no longer cycles through all regeneration modes, indicating a malfunction within the control valve and/or its drive components; the unit is not functioning as intended and requires repair to restore proper regeneration operation.

Chaska, MN 55318

Responded to an install callback for a no-cool complaint; found the air handler blowing air with no cooling due to incorrect low-voltage thermostat wiring at the control board terminal block. Corrected and re-terminated the control wiring (R, C, Y, G) at the board, secured the connections, and verified proper system operation, confirming the installation is complete.

Roger M. Checked in 9 days ago

Responded to an install callback for a no-cool complaint; found the air handler blowing air with no cooling due to incorrect low-voltage thermostat wiring at the control board terminal block. Corrected and re-terminated the control wiring (R, C, Y, G) at the board, secured the connections, and verified proper system operation, confirming the installation is complete.

Chaska, MN 55318

Diagnosed a water leak at the main-level bathroom lavatory, where the hot and cold supply lines and angle stop connections on the aging 27-year-old plumbing were leaking and dripping through the floor into the basement. Disassembled the affected supply connections, cleaned the corroded and mineral-encrusted fittings, and reassembled them to restore watertight operation.

Tony C. Checked in 9 days ago

Diagnosed a water leak at the main-level bathroom lavatory, where the hot and cold supply lines and angle stop connections on the aging 27-year-old plumbing were leaking and dripping through the floor into the basement. Disassembled the affected supply connections, cleaned the corroded and mineral-encrusted fittings, and reassembled them to restore watertight operation.

Chaska, MN 55318

Performed a furnace tune-up, including inspection of the evaporator coil and verification of system electrical operation with a clamp meter. Coil fins were found in good condition with only minor bending, and the system operated normally with no deficiencies or issues identified.

Roger M. Checked in 10 days ago

Performed a furnace tune-up, including inspection of the evaporator coil and verification of system electrical operation with a clamp meter. Coil fins were found in good condition with only minor bending, and the system operated normally with no deficiencies or issues identified.

Chaska, MN 55318

Responded to an install callback and secured the cased coil side panel that had come loose, using a longer screw for a positive hold. Sealed the gap at the vinyl boot overlap on the supply plenum with foil tape to eliminate air leakage. Identified the loose low-voltage wire as the humidifier's outdoor temperature sensor lead and removed it, as the unit is configured to operate without the ODT sensor; all other components were inspected and found in good order.

Moe R. Checked in 11 days ago

Responded to an install callback and secured the cased coil side panel that had come loose, using a longer screw for a positive hold. Sealed the gap at the vinyl boot overlap on the supply plenum with foil tape to eliminate air leakage. Identified the loose low-voltage wire as the humidifier's outdoor temperature sensor lead and removed it, as the unit is configured to operate without the ODT sensor; all other components were inspected and found in good order.

Chaska, MN 55318

Responded to a no-heat complaint and found the furnace operating normally in heating mode. Verified blower motor operation, inspected the inducer motor, checked gas valve operation and manifold pressure with a digital manometer, and tested carbon monoxide levels and filtration. Inspected the hot surface igniter and cleaned the flame sensor; system is running within normal parameters with no issues found.

Koshoua V. Checked in 11 days ago

Responded to a no-heat complaint and found the furnace operating normally in heating mode. Verified blower motor operation, inspected the inducer motor, checked gas valve operation and manifold pressure with a digital manometer, and tested carbon monoxide levels and filtration. Inspected the hot surface igniter and cleaned the flame sensor; system is running within normal parameters with no issues found.

Chaska, MN 55318

Diagnosed a no-hot-water condition caused by a low-pressure fault (Fill 108) on the HTP boiler, which was preventing the unit from firing and heating the indirect water heater. The existing backflow preventer was stuck and would not allow the system to refill, so it was replaced with a new auto-fill and backflow preventer assembly. System pressure was set to 18 PSI with isolation valves left open, and no leaks were found. The unit was tested and fired correctly on both indirect tank and radiator heat calls, then returned to service with no further issues.

Drew D. Checked in 11 days ago

Diagnosed a no-hot-water condition caused by a low-pressure fault (Fill 108) on the HTP boiler, which was preventing the unit from firing and heating the indirect water heater. The existing backflow preventer was stuck and would not allow the system to refill, so it was replaced with a new auto-fill and backflow preventer assembly. System pressure was set to 18 PSI with isolation valves left open, and no leaks were found. The unit was tested and fired correctly on both indirect tank and radiator heat calls, then returned to service with no further issues.

Chaska, MN 55318

Inspected a Kenmore 520 water softener in a roughly 20-year-old home displaying an Error 1 code, with the brine basin full of water and not draining, and evaluated it as a possible source of the leak flagged by the utility company. Documented the unit's condition, which showed no visible rust or external leakage, and prepared an estimate for water treatment repair or replacement.

Kyle H. Checked in 15 days ago

Inspected a Kenmore 520 water softener in a roughly 20-year-old home displaying an Error 1 code, with the brine basin full of water and not draining, and evaluated it as a possible source of the leak flagged by the utility company. Documented the unit's condition, which showed no visible rust or external leakage, and prepared an estimate for water treatment repair or replacement.

Chaska, MN 55318

Responded to service call for reported garbage disposal leak. Upon diagnostic inspection, unable to replicate or locate any active leaking from the existing disposal unit. Customer requested full replacement of the garbage disposal regardless of diagnostic findings.

Removed existing garbage disposal unit from mounting assembly and disconnected all electrical and plumbing connections. Installed new GrindSmart garbage disposal, ensuring proper alignment with sink mounting flange and secure attachment to drain assembly. Connected disposal to existing P-trap configuration using appropriate PVC drainage components. Verified all connections were properly sealed and torqued to manufacturer specifications.

Restored electrical power to unit and conducted operational testing of new garbage disposal. Ran disposal through multiple cycles with water flow to verify proper grinding function and drainage. Performed thorough leak inspection of all connection points including mounting flange, dischar

Kyle F. Checked in 17 days ago

Responded to service call for reported garbage disposal leak. Upon diagnostic inspection, unable to replicate or locate any active leaking from the existing disposal unit. Customer requested full replacement of the garbage disposal regardless of diagnostic findings. Removed existing garbage disposal unit from mounting assembly and disconnected all electrical and plumbing connections. Installed new GrindSmart garbage disposal, ensuring proper alignment with sink mounting flange and secure attachment to drain assembly. Connected disposal to existing P-trap configuration using appropriate PVC drainage components. Verified all connections were properly sealed and torqued to manufacturer specifications. Restored electrical power to unit and conducted operational testing of new garbage disposal. Ran disposal through multiple cycles with water flow to verify proper grinding function and drainage. Performed thorough leak inspection of all connection points including mounting flange, dischar

Chaska, MN 55318

Responded to callback for loud rattling noise from recently installed boiler system. Upon inspection, identified noise source as pipe-to-pipe contact occurring during boiler operation. Installed insulation material between contact points where piping was tapping together to eliminate noise and prevent future wear. System tested and confirmed quiet operation after insulation placement.

Fred G. Checked in 18 days ago

Responded to callback for loud rattling noise from recently installed boiler system. Upon inspection, identified noise source as pipe-to-pipe contact occurring during boiler operation. Installed insulation material between contact points where piping was tapping together to eliminate noise and prevent future wear. System tested and confirmed quiet operation after insulation placement.

Chaska, MN 55318

Responded to no hot water condition on AO Smith ProLine XE tanked water heater displaying flammable vapor sensor lockout error code on gas valve. Replaced defective flammable vapor sensor, reset gas control valve, and performed thorough testing to verify no traces of flammable vapors present in the area. Water heater restored to full operation and left in service.

Drew D. Checked in 22 days ago

Responded to no hot water condition on AO Smith ProLine XE tanked water heater displaying flammable vapor sensor lockout error code on gas valve. Replaced defective flammable vapor sensor, reset gas control valve, and performed thorough testing to verify no traces of flammable vapors present in the area. Water heater restored to full operation and left in service.

Chaska, MN 55318

Responded to service call for leaking tanked water heater in owner-occupied residence. Upon arrival, confirmed active leak while unit still maintained hot water production. Coordinated delivery and pickup with supplier, with new unit arriving mid-afternoon. Successfully removed failed water heater and installed replacement unit. Verified proper connections, tested for leaks, and confirmed hot water operation. Left work area clean with floor drain accessible and all plumbing connections secure.

Matt M. Checked in 25 days ago

Responded to service call for leaking tanked water heater in owner-occupied residence. Upon arrival, confirmed active leak while unit still maintained hot water production. Coordinated delivery and pickup with supplier, with new unit arriving mid-afternoon. Successfully removed failed water heater and installed replacement unit. Verified proper connections, tested for leaks, and confirmed hot water operation. Left work area clean with floor drain accessible and all plumbing connections secure.

Chaska, MN 55318

Responded to service alert on Hydrotech water softener system for new homeowner. Inspected water softener unit and reverse osmosis system for operational status and potential service issues. Found "FROZEN FILTER" alert displayed on control panel but determined no immediate mechanical failures present. Documented system condition with photos showing properly mounted equipment and functional control display. Coordinated with service advisor for follow-up water quality testing and comprehensive equipment verification to ensure optimal system performance.

Scott N. Checked in 28 days ago

Responded to service alert on Hydrotech water softener system for new homeowner. Inspected water softener unit and reverse osmosis system for operational status and potential service issues. Found "FROZEN FILTER" alert displayed on control panel but determined no immediate mechanical failures present. Documented system condition with photos showing properly mounted equipment and functional control display. Coordinated with service advisor for follow-up water quality testing and comprehensive equipment verification to ensure optimal system performance.

Chaska, MN 55318

Completed comprehensive furnace maintenance on a 4-year-old heating system. Performed full system inspection including thermostat operation, air filter condition, condensate drain, blower motor, inducer motor, and electrical connections—all found in satisfactory condition. Verified temperature split across heat exchanger, inspected heat exchanger for cracks or damage, tested igniter and flame sensor functionality, and measured gas supply pressure. All components operating within normal parameters. System running properly with no issues identified at time of service completion.

Eric V. Checked in 29 days ago

Completed comprehensive furnace maintenance on a 4-year-old heating system. Performed full system inspection including thermostat operation, air filter condition, condensate drain, blower motor, inducer motor, and electrical connections—all found in satisfactory condition. Verified temperature split across heat exchanger, inspected heat exchanger for cracks or damage, tested igniter and flame sensor functionality, and measured gas supply pressure. All components operating within normal parameters. System running properly with no issues identified at time of service completion.

Chaska, MN 55318

Responded to kitchen sink drainage issue with slow draining and backup conditions. Upon inspection, diagnosed blockage caused by food debris and grease accumulation in the drain line. Performed mechanical cabling of the kitchen drain line while running water to ensure proper clearing. Successfully cleared primary obstruction within the first ten feet of drain line. Continued cabling the full length of available cable run to remove any additional blockages and ensure complete drain restoration. Reassembled all drain components and conducted thorough operational testing. Verified proper drainage flow with no leaks detected at any connection points. System restored to full operational capacity.

Kyle F. Checked in 31 days ago

Responded to kitchen sink drainage issue with slow draining and backup conditions. Upon inspection, diagnosed blockage caused by food debris and grease accumulation in the drain line. Performed mechanical cabling of the kitchen drain line while running water to ensure proper clearing. Successfully cleared primary obstruction within the first ten feet of drain line. Continued cabling the full length of available cable run to remove any additional blockages and ensure complete drain restoration. Reassembled all drain components and conducted thorough operational testing. Verified proper drainage flow with no leaks detected at any connection points. System restored to full operational capacity.

Chaska, MN 55318

Responded to service call for corroded and leaking boiler system piping on the heating side. Shut down and drained the boiler system to perform necessary repairs. Removed and disposed of failed components including corroded piping sections and defective fittings. Installed new tee fitting, isolation valve, and vent elbow for the lower level heating zone. Replaced the Spirovent air eliminator and associated return line piping to address leaking connections. Supplied and installed new expansion tank, swing check valve, and required fittings per Minnesota mechanical code requirements. Refilled the boiler system and thoroughly purged air from all heating loops to ensure proper circulation. Tested system operation and verified all repairs were leak-free. Confirmed boiler system returned to normal operation with proper pressure and flow. Inspected work area and cleaned up all debris and old materials. All installations meet code requirements with one-year parts and labor warranty included.

Jared R. Checked in 31 days ago

Responded to service call for corroded and leaking boiler system piping on the heating side. Shut down and drained the boiler system to perform necessary repairs. Removed and disposed of failed components including corroded piping sections and defective fittings. Installed new tee fitting, isolation valve, and vent elbow for the lower level heating zone. Replaced the Spirovent air eliminator and associated return line piping to address leaking connections. Supplied and installed new expansion tank, swing check valve, and required fittings per Minnesota mechanical code requirements. Refilled the boiler system and thoroughly purged air from all heating loops to ensure proper circulation. Tested system operation and verified all repairs were leak-free. Confirmed boiler system returned to normal operation with proper pressure and flow. Inspected work area and cleaned up all debris and old materials. All installations meet code requirements with one-year parts and labor warranty included.

Chaska, MN 55318

“Mark was very pleasant to work with! He was on time and took care of my plumbing needs efficiently and effectively. I would definitely use him again for any plumbing issues I may have. I have been using Hurlburt for all of my heating, plumbing, and electrical needs and have always been satisfied!”

Alison A.

“Great service! Professionals starting from the first person I spoke to on the phone and finalizing with the person who finished the installation and cleaned up after. Staff explained everything well. Highly recommended!!!”

Jessica F.

"Outstanding service as always! Hurlburt goes above and beyond for their customers. We got scheduled right away, and Shawn did a great job. I will continue to use these guys for everything!!!"

Nicole T.

"Our technician Mike was just awesome. Took the time to show me what he was doing and explained why he was doing it. Gave me an honest evaluation of my situation. You can’t go wrong with Hurlburt and the work ethics of the employees."

Jean C.

Trevor came to service our AC unit. Very happy with his work. Trevor was friendly and knowledgeable, and got our issue fixed quickly. Hurlburt Heating and Plumbing is a great company to work with."

Debbie L.

"Hurlburt has helped us out with both plumbing and HVAC services in the past and have always done a great job. All their technicians, especially Mark, have been kind, professional, and quick with service!"

Sara N.

See More Reviews

Comments

This field is for validation purposes and should be left unchanged.

Full Name(Required)

Email(Required)

Phone(Required)

Are You a New Customer?(Required)

Inquiry About...(Required)

Untitled

Message

Transactional SMS Authorization(Required)

By submitting this form and signing up for texts, you agree to receive informational messages (appointment reminders, account notifications, etc.) from Hurlburt Heating & Plumbing at the number provided. Msg & data rates may apply. Msg frequency varies. Unsubscribe at any time by replying STOP and no further messages will be sent. Reply HELP for help or contact us at office@hurlburthp.com or (715) 802-2170. For more information, please review our Privacy Policy and Terms and Conditions.

Marketing Consent

Please check this box if you would also like to receive special offers and promotions via text message. You may unsubscribe at any time by replying STOP. For customer care, reply HELP or contact office@hurlburthp.com or (715) 802-2170.

This field is hidden when viewing the form

Source

This field is hidden when viewing the form

Medium

This field is hidden when viewing the form

Campaign

This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.