HVAC, Plumbing, and Electrical Contractor in Bloomington, MN
Since 1959, Hurlburt has made it our mission to keep your home comfortable and protected.
Highly Rated
Satisfaction Guaranteed
0% Financing
Friendly Technicians
A 1960s split-level in East Bloomington can have a completely different set of heating and cooling problems from a larger two-story home in West Bloomington. Add the condos and townhomes around the South Loop, and there is no single mechanical setup that defines this city. Hurlburt Heating, AC, Plumbing, & Electrical helps homeowners throughout Bloomington maintain and update the systems already built into their homes. Call [site_info_phone_number] or connect online to schedule service.
Click to learn more about our specific HVAC and IAQ services.
Click to learn more about our specific Plumbing services.
Don’t let home issues interrupt your day. Contact Hurlburt to schedule HVAC, plumbing, or electrical services for your Bloomington home.
Why Bloomington Homes Need a Local Approach
Bloomington grew heavily during the 1950s through 1970s, so a large share of the city’s housing now has decades-old ductwork and mechanical infrastructure. Ramblers and split-levels are especially common in East Bloomington, while West Bloomington has larger post-1980 homes near the bluffs where zoning and variable-speed equipment are more common. South Loop housing brings another setup entirely, with condos, townhomes, and multifamily buildings around the Mall of America area.
There is also limited raw land left for traditional single-family construction. Instead, homeowners are improving what they already have through additions, basement finishing, and full-system retrofits. From Normandale Lake and Bush Lake Beach to Dred Scott Playfield and the neighborhoods along the Minnesota Valley National Wildlife Refuge, Bloomington homes reflect several generations of growth packed into one city.
Air Conditioning Services in Bloomington, MN
Summer cooling problems in Bloomington are often tied to the house itself. Older East Bloomington ramblers and split-levels can have undersized or uninsulated ducts, which can leave upper floors warmer than the rest of the home when July and August humidity settles in. Cottonwood and heavy spring pollen from local parklands can also collect around outdoor condenser coils.
Air conditioning and indoor air quality services include:
Air conditioning replacement
Air conditioning repair
Air conditioning maintenance
Ductless systems
Indoor air quality services
Some older Bloomington homes still use hydronic baseboard heat, so they may not have a central duct system to work with when cooling is added. In those properties, ductless mini-splits can be a practical option. Homes with existing ductwork may instead benefit from sealing, insulation, or air purification when airflow and indoor comfort are the real issues. What works near Dred Scott Playfield may not be the same setup you find in a larger West Bloomington home.
Plumbing Services in Bloomington, MN
Plumbing work in Bloomington often comes up as homeowners update older properties rather than move into brand-new construction. With limited open land available for new single-family homes, basement completions, additions, and larger remodels are a bigger part of the local housing picture. That means new plumbing frequently has to be worked into a house that was built 40, 50, or 60 years ago.
Plumbing services include:
Plumbing repair
Plumbing installation
Leak detection and repair
Sewer and drain service
Water heaters
Sump pumps
Water treatment
Gas lines
Basement projects are a good example of why the age of the home matters. Utility areas may already contain the furnace, water heater, and other mechanical equipment, so new plumbing has to fit around an established layout rather than starting from scratch. That is common across the city, from older East Bloomington neighborhoods to established homes around Normandale Lake and Bush Lake. Hurlburt can handle both everyday repairs and larger plumbing work tied to the way Bloomington homeowners are updating existing homes.
Heating Services in Bloomington, MN
Once the October first frost hits, Bloomington heating systems can move from light use to regular operation quickly. Winter deep freezes below 0°F are part of the local climate, and November blizzards can arrive early enough to block heat pump equipment or furnace intake vents. Forced-air gas furnaces are the standard setup in much of the city, but older pockets still include hydronic baseboard systems.
Heating services include:
Heating installation
Heating replacement
Heating repair
Heating maintenance
Heat pumps
Furnaces
Boilers
Geothermal
The equipment mix is changing too. Cold-climate air-source heat pumps are becoming more common as utility and state incentives encourage homeowners to consider them, while some hydronic homes use ductless systems to add cooling without installing full ductwork. West Bloomington’s larger executive homes can bring zoning and variable-speed equipment into the conversation. By contrast, a mid-century home on the Kennedy side of the city may still be working with much older duct infrastructure.
Electrical Services in Bloomington, MN
A lot has changed electrically since Bloomington’s biggest housing boom. Homes built in the 1950s, 1960s, and 1970s were never planned around EV charging, smart controls, modern HVAC equipment, or the electrical needs that can come with finished basements and additions. Those upgrades can put more demand on an established electrical system.
Electrical services include:
Electrical repair services
Electrical installation and wiring
Whole-home generators
Switches, outlets, and ceiling fans
Panel replacement and repair
EV chargers
Smart home installations
Bloomington’s weather gives homeowners another reason to think about the electrical side of the house. Severe spring thunderstorms can bring high winds and localized outages, which makes surge protection and backup power relevant across the city. Whether the property is closer to Jefferson High School, the Mall of America area, or one of the older neighborhoods farther east, the electrical system needs to keep up with how the house is being used now.
Schedule Home Service in Bloomington
Bloomington homes are constantly being adapted, whether that means improving airflow in an East Bloomington split-level, adding new equipment to a West Bloomington home, or updating plumbing and electrical systems during a basement project. Hurlburt Heating, AC, Plumbing, & Electrical can help you maintain, repair, or upgrade those systems with the existing home in mind. Call [site_info_phone_number] or connect online to schedule service in Bloomington, Minnesota.
Call Hurlburt today to schedule HVAC, electrical, or plumbing service for your Bloomington home.
Recent Jobs and Reviews in Bloomington, MN
Bloomington, MN at a glance
Hurlburt Heating & Plumbing has completed 20 jobs in Bloomington, MN between September 2026 and November 2026.
The most recent job was on November 16, 2026.
Hurlburt Heating & Plumbing has completed 154 jobs in Bloomington, MN in the last 12 months. The first job there was in October 2025.
Job Locations and Reviews
Eric V.Checked in
Performed a scheduled heating maintenance visit on one gas fireplace; per the homeowner's request, a full cleaning was not performed since the unit sees minimal use. Verified the firebox interior was clean, the vent was open, and carbon monoxide readings showed no leakage, with no visible damage or rust at the unit. Advised the homeowner that fireplace service is no longer offered and referred them to a dedicated fireplace service company for future needs.
Bloomington, MN 55437
Roger M.Checked in
Performed annual fall heating tune-up on a 10-year-old gas furnace and associated humidifier, including inspection of the PVC vent and condensate drain connections, gas supply connectors, and surrounding equipment. Verified electrical operation with a clamp meter and replaced the dirty air filter. No frost, rust, or cracking observed on the equipment, and the system was left in proper working order.
Bloomington, MN 55431
Roger M.Checked in
Installed a customer-supplied standard Honeywell thermostat, mounting the new base plate and terminating the control wiring at the appropriate terminals. Verified secure connections and proper thermostat operation. Noted existing water staining on the wall surrounding the thermostat location.
Bloomington, MN 55438
Moe R.Checked in
Performed a safety inspection on a gas fireplace as part of a member maintenance tune-up. Verified proper operation of the unit, confirmed a stable flame with normal burn characteristics, and checked for carbon monoxide leakage around the appliance, with none detected. The fireplace was found to be operating safely and within normal parameters at the time of service.
Bloomington, MN 55437
Jarrod S.Checked in
Shut off the water supply at the city curb stop and replaced the main water shutoff valves on both sides of the water meter in the basement. Installed new ball valves, restored water service, and verified proper operation with no leaks at the new connections.
Bloomington, MN 55438
Xavier C.Checked in
Responded to a no-heat call and found the existing 10+ year old Honeywell mechanical thermostat (T822D) non-functional, with the cover removed, exposing aged, dusty internals and a yellowed base plate. Verified the 2-wire, Class 2 low-voltage control circuit and determined the unit requires replacement. The customer's preferred 2-wire thermostat was ordered, and a return visit is scheduled to install it and restore heating operation.
Bloomington, MN 55438
Jarrod S.Checked in
Inspected a Bradford White hybrid heat pump water heater displaying a Fault 10 (superheat) code, and reviewed the unit's operating mode and temperature setpoint. Verified the water, electrical disconnect, and drain connections were intact, with flexible connectors and insulated copper supply lines in good condition and no visible leaks, corrosion, or damage. Scheduled a follow-up consultation to evaluate the heat pump fault and recommend the most efficient operating configuration.
Bloomington, MN 55438
Kyle F.Checked in
Diagnosed a kitchen drain leak on an exterior wall following a prior blockage-clearing attempt; the leak source is concealed behind the cabinet wall and could not be accessed or visually confirmed. Noted that the kitchen sink is plumbed with a non-code-compliant S-trap and recommended an estimate for repair and code correction, along with water mitigation. Cabled the bar sink drain with a flex-shaft cable at full length, restoring flow, and will return to clear the kitchen drain section after the repair if needed.
Bloomington, MN 55438
Jared R.Checked in
Performed a boiler tune-up, including inspection and cleaning of the burners and inspection of the heat exchanger, circulator pump, igniter, and wiring, along with verification of gas pressures and combustion air. Cycled the system, bled the radiators, and set system water pressure to 18 psi, confirming proper operation. Identified a leaking air vent above the expansion tank and a circulator pump not moving water properly, both recommended for replacement, and found the glycol in the system has broken down and requires a system flush.
Bloomington, MN 55438
Kyle F.Checked in
Performed a mainline camera inspection to diagnose an intermittently backing-up floor drain and identified a significant tree root mass at approximately 70 feet. Cleared the obstruction with a flex shaft cutter, then re-scoped the line to verify no remaining root intrusion. Vacuumed sediment and debris from the floor drain trap, and confirmed the system was open and flowing properly.
Bloomington, MN 55425
Alton S.Checked in
Performed annual tune-up on an eight-year-old gas fireplace insert, including vacuuming the ceramic log set, screen, and firebox area and scrubbing the flame sensor to ensure reliable ignition and flame proving. Cleaned the glass front panel on both the interior and exterior surfaces, and protected the hearth with a moving blanket during service. System operates properly and is ready for the winter heating season.
Bloomington, MN 55437
Alton S.Checked in
Performed an annual maintenance tune-up on a gas fireplace. Found heavy soot accumulation on the logs, then vacuumed the logs and surrounding fire pit area and cleaned the flame sensor. Inspected the flue and damper assembly, noting soot buildup and surface rust on the damper linkage. The unit was left operational, and the customer was advised that the vent damper must be open before use (handle toward you is open, away is closed).
Bloomington, MN 55437
Ali T.Checked in
Performed a complete maintenance inspection on a Lennox furnace less than one year old, including a borescope inspection of the internal components. The furnace was found operational, but rust was observed originating from the evaporator coil. A comfort advisor visit has been scheduled to provide an estimate for AC repair or replacement.
Bloomington, MN 55438
Ty S.Checked in
Attempted phone follow-up regarding ongoing GFCI tripping issue. Customer previously removed extension cord and plugged equipment directly into outlet as instructed, but GFCI continued to trip, indicating potential ground fault in equipment or circuit wiring. No answer on callback attempt; follow-up scheduled for Thursday between 12-4 PM to diagnose and resolve persistent GFCI problem.
Bloomington, MN 55438
Ty S.Checked in
Conducted phone follow-up regarding previous breaker work and GFCI tripping issues. Addressed customer questions about GFCI circuit interruptions and provided troubleshooting guidance to disconnect extension cord and plug device directly into wall outlet, as extension cord may be faulty and causing the tripping condition.
Bloomington, MN 55438
Scott N.Checked in
Responded to a water leak issue in the bathroom where the shower faucet failed to stop water flow when turned off and the tub spout was leaking due to a malfunctioning diverter. Successfully replaced the tub spout assembly, restoring proper water control and eliminating all leaks.
Bloomington, MN 55425
Roger M.Checked in
Responded to no heat call on 13-year-old Bryant furnace. Upon inspection, diagnosed failed inducer motor and faulty pressure switches preventing system operation. Discovered significant rust and corrosion on furnace components, indicating prolonged moisture exposure. Advised customer of additional concerns regarding heat exchanger integrity due to age and visible deterioration. Customer elected to proceed with repairs. Ordered replacement inducer motor and pressure switches for installation.
Bloomington, MN 55420
Jim M.Checked in
Completed comprehensive maintenance tune-up on 9-year-old Lennox furnace system. Cleaned flame rod and verified hot surface ignitor resistance within manufacturer specifications. Confirmed inducer motor amperage operating in acceptable range and measured carbon monoxide output at 10 ppm. Inspected heat exchanger, finding it clean and free of significant rust, though exchanger observation port showed minor surface corrosion with no structural concerns. Identified rust formation on right side of inducer motor chamber with evidence of moisture infiltration extending to lower chamber area—rust appeared moist but no standing water present. Documented findings with photographs and advised homeowner of observed conditions requiring monitoring.
Bloomington, MN 55431
Roger M.Checked in
Responded to no heat call on 2-year-old Lennox furnace with blower motor not operating in heating or cooling mode. Upon arrival, performed diagnostic testing and determined blower motor failure. Replaced defective blower motor assembly, verified proper operation in both heating and cooling modes, and restored system to full functionality.
Bloomington, MN 55420
Alton S.Checked in
Responded to no heat call on 2015 Goodman furnace blowing cold air. Upon arrival, verified thermostat was calling for heat but system was activating cooling mode instead. Checked all thermostat and furnace wiring connections and confirmed proper placement. Performed voltage testing on control board terminals: when calling for cooling, C-Y terminal was open and C-W showed 24 volts as expected; however, when calling for heat, C-W terminal was open and C-Y terminal showed 24 volts, causing AC unit to run instead of furnace ignition sequence. Diagnosed faulty integrated furnace control board (PCBBF134) with reversed heat/cool signal output. Documented findings with photos and provided estimate for control board replacement to property owner.
“Mark was very pleasant to work with! He was on time and took care of my plumbing needs efficiently and effectively. I would definitely use him again for any plumbing issues I may have. I have been using Hurlburt for all of my heating, plumbing, and electrical needs and have always been satisfied!”
Alison A.
“Great service! Professionals starting from the first person I spoke to on the phone and finalizing with the person who finished the installation and cleaned up after. Staff explained everything well. Highly recommended!!!”
Jessica F.
"Outstanding service as always! Hurlburt goes above and beyond for their customers. We got scheduled right away, and Shawn did a great job. I will continue to use these guys for everything!!!"
Nicole T.
"Our technician Mike was just awesome. Took the time to show me what he was doing and explained why he was doing it. Gave me an honest evaluation of my situation. You can’t go wrong with Hurlburt and the work ethics of the employees."
Jean C.
Trevor came to service our AC unit. Very happy with his work. Trevor was friendly and knowledgeable, and got our issue fixed quickly. Hurlburt Heating and Plumbing is a great company to work with."
Debbie L.
"Hurlburt has helped us out with both plumbing and HVAC services in the past and have always done a great job. All their technicians, especially Mark, have been kind, professional, and quick with service!"