HVAC, Plumbing, and Electrical Contractor in Bloomington, MN
Since 1959, Hurlburt has made it our mission to keep your home comfortable and protected.
Highly Rated
Satisfaction Guaranteed
0% Financing
Friendly Technicians
A 1960s split-level in East Bloomington can have a completely different set of heating and cooling problems from a larger two-story home in West Bloomington. Add the condos and townhomes around the South Loop, and there is no single mechanical setup that defines this city. Hurlburt Heating, AC, Plumbing, & Electrical helps homeowners throughout Bloomington maintain and update the systems already built into their homes. Call [site_info_phone_number] or connect online to schedule service.
Click to learn more about our specific HVAC and IAQ services.
Click to learn more about our specific Plumbing services.
Don’t let home issues interrupt your day. Contact Hurlburt to schedule HVAC, plumbing, or electrical services for your Bloomington home.
Why Bloomington Homes Need a Local Approach
Bloomington grew heavily during the 1950s through 1970s, so a large share of the city’s housing now has decades-old ductwork and mechanical infrastructure. Ramblers and split-levels are especially common in East Bloomington, while West Bloomington has larger post-1980 homes near the bluffs where zoning and variable-speed equipment are more common. South Loop housing brings another setup entirely, with condos, townhomes, and multifamily buildings around the Mall of America area.
There is also limited raw land left for traditional single-family construction. Instead, homeowners are improving what they already have through additions, basement finishing, and full-system retrofits. From Normandale Lake and Bush Lake Beach to Dred Scott Playfield and the neighborhoods along the Minnesota Valley National Wildlife Refuge, Bloomington homes reflect several generations of growth packed into one city.
Air Conditioning Services in Bloomington, MN
Summer cooling problems in Bloomington are often tied to the house itself. Older East Bloomington ramblers and split-levels can have undersized or uninsulated ducts, which can leave upper floors warmer than the rest of the home when July and August humidity settles in. Cottonwood and heavy spring pollen from local parklands can also collect around outdoor condenser coils.
Air conditioning and indoor air quality services include:
Air conditioning replacement
Air conditioning repair
Air conditioning maintenance
Ductless systems
Indoor air quality services
Some older Bloomington homes still use hydronic baseboard heat, so they may not have a central duct system to work with when cooling is added. In those properties, ductless mini-splits can be a practical option. Homes with existing ductwork may instead benefit from sealing, insulation, or air purification when airflow and indoor comfort are the real issues. What works near Dred Scott Playfield may not be the same setup you find in a larger West Bloomington home.
Plumbing Services in Bloomington, MN
Plumbing work in Bloomington often comes up as homeowners update older properties rather than move into brand-new construction. With limited open land available for new single-family homes, basement completions, additions, and larger remodels are a bigger part of the local housing picture. That means new plumbing frequently has to be worked into a house that was built 40, 50, or 60 years ago.
Plumbing services include:
Plumbing repair
Plumbing installation
Leak detection and repair
Sewer and drain service
Water heaters
Sump pumps
Water treatment
Gas lines
Basement projects are a good example of why the age of the home matters. Utility areas may already contain the furnace, water heater, and other mechanical equipment, so new plumbing has to fit around an established layout rather than starting from scratch. That is common across the city, from older East Bloomington neighborhoods to established homes around Normandale Lake and Bush Lake. Hurlburt can handle both everyday repairs and larger plumbing work tied to the way Bloomington homeowners are updating existing homes.
Heating Services in Bloomington, MN
Once the October first frost hits, Bloomington heating systems can move from light use to regular operation quickly. Winter deep freezes below 0°F are part of the local climate, and November blizzards can arrive early enough to block heat pump equipment or furnace intake vents. Forced-air gas furnaces are the standard setup in much of the city, but older pockets still include hydronic baseboard systems.
Heating services include:
Heating installation
Heating replacement
Heating repair
Heating maintenance
Heat pumps
Furnaces
Boilers
Geothermal
The equipment mix is changing too. Cold-climate air-source heat pumps are becoming more common as utility and state incentives encourage homeowners to consider them, while some hydronic homes use ductless systems to add cooling without installing full ductwork. West Bloomington’s larger executive homes can bring zoning and variable-speed equipment into the conversation. By contrast, a mid-century home on the Kennedy side of the city may still be working with much older duct infrastructure.
Electrical Services in Bloomington, MN
A lot has changed electrically since Bloomington’s biggest housing boom. Homes built in the 1950s, 1960s, and 1970s were never planned around EV charging, smart controls, modern HVAC equipment, or the electrical needs that can come with finished basements and additions. Those upgrades can put more demand on an established electrical system.
Electrical services include:
Electrical repair services
Electrical installation and wiring
Whole-home generators
Switches, outlets, and ceiling fans
Panel replacement and repair
EV chargers
Smart home installations
Bloomington’s weather gives homeowners another reason to think about the electrical side of the house. Severe spring thunderstorms can bring high winds and localized outages, which makes surge protection and backup power relevant across the city. Whether the property is closer to Jefferson High School, the Mall of America area, or one of the older neighborhoods farther east, the electrical system needs to keep up with how the house is being used now.
Schedule Home Service in Bloomington
Bloomington homes are constantly being adapted, whether that means improving airflow in an East Bloomington split-level, adding new equipment to a West Bloomington home, or updating plumbing and electrical systems during a basement project. Hurlburt Heating, AC, Plumbing, & Electrical can help you maintain, repair, or upgrade those systems with the existing home in mind. Call [site_info_phone_number] or connect online to schedule service in Bloomington, Minnesota.
Call Hurlburt today to schedule HVAC, electrical, or plumbing service for your Bloomington home.
Recent Jobs and Reviews in Bloomington, MN
Bloomington, MN at a glance
Hurlburt Heating & Plumbing has completed 20 jobs in Bloomington, MN in September 2026.
The most recent job was on September 24, 2026.
Hurlburt Heating & Plumbing has completed 154 jobs in Bloomington, MN in the last 12 months. The first job there was in October 2025.
Job Locations and Reviews
Jim M.Checked in
Responded to no heat call on Lennox furnace displaying Alarm ID 270 "GP Flame Failed To Ignite" error code on thermostat. Removed burner access panel and cleaned flame sensor to address ignition failure. System successfully ignited and maintained flame with burner cover removed, confirming proper combustion and heating operation for 20 minutes. However, flames extinguished when burner cover was reinstalled, indicating potential pressure switch issue or combustion air supply problem. Visually inspected fresh air intake at burner chamber with no visible obstructions found. Air intake and exhaust terminations located on roof were not accessible during this visit for thorough inspection. Unit operates and heats normally only with burner cover removed, suggesting improper pressure differential or combustion air flow restriction when cabinet is sealed. Follow-up service call required to inspect roof-mounted intake and exhaust venting system, verify proper termination clearances, check for bl
Bloomington, MN 55431
Charles P.Checked in
Completed sold repair per estimate involving cast iron drain line removal. Opened wall cavity to access plumbing system, cut out deteriorated cast iron piping, and exposed existing drain and supply lines for replacement work. Three hours of labor performed to complete demolition phase of the repair project.
Bloomington, MN 55425
Drew D.Checked in
Responded to service call for refrigerator water line connection and gas range installation. Upon arrival, found customer-installed copper water line leaking at connection point. Installed new 1/4" brass ferrule and compression fitting to properly secure water line to refrigerator. Turned on water supply, flushed filtration system for five minutes, and verified no leaks present at connection points.
Proceeded with gas range hook-up by installing 1/2" black iron street 90 and close nipple after existing gas appliance shut-off valve to provide proper clearance for appliance positioning against wall. Connected flexible gas connector whip to range per manufacturer specifications and Minnesota plumbing code requirements. Opened gas supply valve and performed comprehensive leak detection test using approved methods at all connection points including shut-off valve, street 90, and appliance connector. Ignited all six burners on cooktop to verify proper gas flow and combustion. Observed clean
Bloomington, MN 55437
Moe R.Checked in
Performed follow-up carbon monoxide safety inspection on residential fireplace following recent maintenance service. Conducted comprehensive room CO testing around fireplace shroud and surrounding living area while unit was in operation. Verified proper exhaust draft through chimney and confirmed no carbon monoxide spillage into living space. All safety parameters tested within normal operating range and unit functioning properly.
Bloomington, MN 55437
Moe R.Checked in
Responded to reported intermittent gas leak in mechanical room affecting furnace system. Previous technicians had isolated leak to area between gas shutoff valve and furnace, with utility company detecting gas presence near burners when unit was not in heating cycle, indicating potential gas valve seating failure. Performed comprehensive leak detection testing using bubble solution on all joints and connections from floor shutoff through water heater and furnace gas train. Identified and tightened loose cap on drip leg that was hand-loose. Conducted extended monitoring of system during operation with no detectable leaks found at time of service. Noted combustion blower exhibiting excessive noise levels, which may indicate impeller wear or bearing failure and could compromise proper venting of combustion gases. Gas valve seating issue remains a concern requiring further diagnostic evaluation and potential valve replacement to ensure safe operation and prevent gas migration to burner ass
Bloomington, MN 55420
Jon W.Checked in
Responded to no heat call on 22-year-old furnace. Upon arrival, discovered thermostat wiring issue from recent summer replacement—W and C wires were reversed. Corrected wiring and furnace initiated startup sequence. During operational inspection, identified blower motor actively leaking lubricating oil. Further diagnostic revealed multiple cracks in heat exchanger with carbon monoxide leakage detected outside the combustion chamber during operation. Tagged unit as unsafe and shut down system immediately due to life safety hazard. Furnace replacement estimate scheduled due to age of equipment and extent of critical component failures making repair economically unfeasible.
Bloomington, MN 55420
Drew D.Checked in
Responded to gas leak detection call at utility closet housing furnace and water heater. Used combustible gas detector to identify small leak at union connection on water heater gas valve. Tightened union fitting and verified repair with both gas detector and bubble test, confirming no further leak present. Cycled water heater burner through full heating operation to monitor for gas odor or additional leaks; unit now operational and leak-free. Proceeded to leak check furnace unit with gas valve reopened. Detected gas reading at burner assembly when furnace was not in heating cycle, indicating potential failure of furnace gas valve to seat properly. Noted combustion blower operating with excessive noise, suggesting possible inadequate vapor purging through exhaust system. Recommended HVAC technician perform comprehensive diagnostic evaluation of furnace unit to address gas valve seating issue and combustion blower concerns.
Bloomington, MN 55420
Xavier C.Checked in
Responded to reported gas leak at 30-year-old furnace and water heater. Performed comprehensive leak detection using soap bubble test on furnace control valve, gas supply lines, and all fittings and connections. No active leaks detected at furnace gas valve assembly or supply piping during testing.
Upon further inspection, discovered evidence of melting and heat damage at top of water heater, indicating potential backdrafting condition. This represents a safety hazard as combustion gases may not be properly venting, creating risk of carbon monoxide exposure and equipment damage. Documented findings with photographs showing furnace gas valve assembly, blower motor housing, and mechanical components in utility space.
Recommended replacement of aging furnace with high-efficiency unit featuring alternative venting configuration to eliminate backdrafting concerns and improve system safety. Coordinated with licensed plumber to evaluate water heater venting system, verify gas connections a
Bloomington, MN 55420
Moe R.Checked in
Completed annual maintenance inspection on two 18-year-old Bryant furnaces and one Navien boiler system. On both furnaces, verified ignition and flame safety operation, inspected burners and gas valves, confirmed heat exchangers in good condition, replaced air filters, checked humidifiers, inspected blower wheels, performed combustion analysis with satisfactory results, and verified temperature rise within manufacturer specifications. On the Navien boiler, inspected all piping connections, tested backflow preventer and pressure relief valve, verified system electronics and control operation, and performed combustion analysis with acceptable results. All equipment operating properly at time of service completion.
Bloomington, MN 55437
Fred G.Checked in
Responded to service call for non-operational gas wall furnace with malfunctioning control knob and pilot light that had been off since early summer. Performed diagnostic inspection by removing lower access panel to assess internal components, which revealed accumulated dust and debris within the unit. Documented existing conditions and provided replacement estimate as requested, as the control system requires replacement to restore proper functionality.
Bloomington, MN 55431
Ali T.Checked in
Completed furnace tuneup and inspection, identifying a failing inducer motor and corroded burner assembly. Replaced the defective inducer motor and thoroughly cleaned the rusty burners to restore proper combustion and safe operation. System tested and verified operational upon completion.
Bloomington, MN 55437
Koshoua V.Checked in
Completed comprehensive furnace tune-up and maintenance inspection on Bryant gas furnace system. Performed thorough evaluation of all critical components including thermostat operation, air filter condition, blower assembly, burner and heat exchanger compartment, inducer motor operation, ignition system, flame sensor, safety controls, electrical connections, condensate drain system, and temperature rise across heat exchanger. All operational readings measured within manufacturer specifications with no mechanical deficiencies or safety concerns identified. System verified to be operating properly and efficiently. Advised customer to maintain regular air filter replacement schedule to ensure continued optimal performance.
Bloomington, MN 55438
Roger M.Checked in
Completed comprehensive furnace and AC tune-up on aging HVAC system at recently purchased property. During inspection, identified multiple components nearing end of service life including rusty inducer motor, failing blower motor, and heat exchanger requiring monitoring. AC system found low on refrigerant charge. Gas valve threads stripped, preventing pressure testing capability. Cleaned flame sensor and verified seal level acceptable. Documented equipment condition with photos showing electrical components, capacitor, and ductwork. System operational but recommend planning for replacement due to age and cumulative wear of critical components.
Bloomington, MN 55431
Eric V.Checked in
Completed maintenance on two gas fireplaces under maintenance agreement. Inspected pilot assemblies, decorative log sets, wiring, gas valves, and venting systems on both units—all components found to be in proper working order. Both fireplaces were operating without glass panels or ember beds at time of service. Unable to complete combustion safety analysis and CO level testing due to lack of available combustion analyzer equipment. Submitted follow-up work order for return visit to perform required safety checks and carbon monoxide measurements to ensure complete compliance with maintenance standards.
Bloomington, MN 55437
Fred G.Checked in
Responded to callback for newly installed AC system not cooling sufficiently, with unit only reaching 73° during high heat conditions. Performed thorough system diagnostics and measured airflow at floor registers to assess performance. Unable to identify equipment defects; determined existing ductwork may be inadequate for proper system operation and will coordinate with installation manager regarding potential ductwork modifications.
Bloomington, MN 55431
Xavier C.Checked in
Completed comprehensive furnace maintenance and tune-up on residential forced-air heating system. Inspected and verified all components including blower assembly, heat exchanger, burners, and whole-house humidifier; confirmed system is operating safely with proper heating output. Unit is clean, all safety controls tested and functioning correctly, with membership benefits applied to service agreement.
Bloomington, MN 55431
Alton S.Checked in
Responded to no cooling complaint on 21-year-old residential AC system with repeated breaker tripping issues. This was the fifth service visit in one week for intermittent cooling failures. Previous technician had cleaned outdoor coils, verified refrigerant charge, tested capacitors, and inspected wiring with temporary success before unit failed again that evening.
Upon arrival, confirmed indoor blower motor operational with no error codes on furnace control board. Breaker was in ON position but outdoor unit remained off. Verified 24VAC present from thermostat to contactor. Tested capacitor - readings within acceptable range. Contactor showed no visible signs of failure or pitting.
Proceeded to electrical disconnect at outdoor unit. Found disconnect switch in ON position but measured zero 240VAC at load side terminals. Opened disconnect enclosure for inspection and identified severely corroded connection screw that prevented proper electrical contact. Screw deterioration was advanced
Bloomington, MN 55438
Jared R.Checked in
Responded to no cooling complaint on 21-year-old air conditioning system with interior temperature at 80 degrees. Previous technicians had replaced capacitor without resolution, and electrician determined issue was within AC unit rather than breaker. Upon arrival, verified furnace blower operation and confirmed control board signal to condenser. Found condenser breaker tripped and condenser coil blocked with debris. Performed electrical diagnostics on condenser components, reset tripped breaker, and cleared blocked condenser coil. Adjusted TXV bulb positioning and verified refrigerant charge levels within specification. Cycled system through complete operation and confirmed normal cooling function restored.
Bloomington, MN 55438
Matt M.Checked in
Responded to emergency call for back drafting 40-gallon natural gas water heater. Upon inspection, identified 24-year-old A.O. Smith ProMax unit experiencing dangerous combustion gas spillage due to inadequate makeup air in utility room. Immediately shut off gas supply to unit for safety. Assessed draft hood and flue system, confirming improper venting conditions caused by insufficient fresh air supply. Implemented temporary solution by opening window to provide makeup air and prevent carbon monoxide hazard. Documented flue conditions and water heater installation with photographs. Advised that permanent ventilation solution required and recommended unit replacement due to age and safety concerns.
Bloomington, MN 55420
Moe R.Checked in
Responded to no cool call on 21-year-old Lennox air conditioning system. Diagnosed and replaced failed blower capacitor to restore furnace blower operation. During troubleshooting, discovered tripped AC breaker; upon reset attempt, right side of breaker disengaged from bus rail. Temporarily reseated breaker but noted excessive looseness requiring electrical panel correction for safety. Performed comprehensive system evaluation including heat exchanger inspection (observed wear and potential crack formation at eyelets), refrigerant charge verification (within specifications), AC electronics testing (operational), and temperature drop measurement (within acceptable range). All photographic documentation completed. Customer enrolled in rewards program and follow-up appointment scheduled with service advisor for equipment age concerns and electrical panel issue.
“Mark was very pleasant to work with! He was on time and took care of my plumbing needs efficiently and effectively. I would definitely use him again for any plumbing issues I may have. I have been using Hurlburt for all of my heating, plumbing, and electrical needs and have always been satisfied!”
Alison A.
“Great service! Professionals starting from the first person I spoke to on the phone and finalizing with the person who finished the installation and cleaned up after. Staff explained everything well. Highly recommended!!!”
Jessica F.
"Outstanding service as always! Hurlburt goes above and beyond for their customers. We got scheduled right away, and Shawn did a great job. I will continue to use these guys for everything!!!"
Nicole T.
"Our technician Mike was just awesome. Took the time to show me what he was doing and explained why he was doing it. Gave me an honest evaluation of my situation. You can’t go wrong with Hurlburt and the work ethics of the employees."
Jean C.
Trevor came to service our AC unit. Very happy with his work. Trevor was friendly and knowledgeable, and got our issue fixed quickly. Hurlburt Heating and Plumbing is a great company to work with."
Debbie L.
"Hurlburt has helped us out with both plumbing and HVAC services in the past and have always done a great job. All their technicians, especially Mark, have been kind, professional, and quick with service!"