
To get assistance with your HVAC and plumbing repairs, maintenance, and installations, look no further! To see what our satisfied customers think about our HVAC and plumber services in Prescott, WI, read our reviews below.
Hurlburt Heating & Plumbing has completed 20 jobs in Prescott, WI between November 2025 and January 2026.
The most recent job was on January 24, 2026.
Hurlburt Heating & Plumbing has completed 121 jobs in Prescott, WI in the last 12 months. The first job there was in July 2017.
Diagnosed and repaired 5-year-old furnace with no heat issue; identified cracked inducer tubing which was fixed, allowing burners to ignite. Further diagnosis revealed failed blower motor and pressure switch causing high limit trip; recommended replacement of these components to restore proper system operation.
Performed annual furnace maintenance on 9-year-old Bryant high-efficiency system. Inspected all components with access panels removed. Blower wheel was found clean and system is functioning properly. Visual inspection of internal components showed normal wear consistent with unit age.
Replaced multiple corroded valves on plumbing fixtures that were leaking. Inspection revealed significant valve deterioration causing water leakage. New valves were successfully installed and system tested to confirm proper operation with no further leaks detected.
Responded to no-heat call for new homeowner reporting unusual humming noise from furnace with no visible pilot light. Upon inspection, identified a significant crack in the heat exchanger, which was documented with detailed photos. Provided customer with heat exchanger replacement options and scheduled follow-up appointment for complete system replacement quote.
Responded to warranty call regarding leak at bathtub overflow connection installed during previous re-pipe service. Upon inspection, determined the overflow plate needed additional tightening. Successfully resolved the issue by properly securing the overflow connection, eliminating the leak.
Repaired leaking main water line before the shut-off valve by replacing the connection below the ball valve. Additionally, replaced rotted P-trap under bathtub, which required re-piping the tub drain and associated water/vent piping. Coordinated with city water department for main water shut-off prior to performing repairs.
Performed scheduled furnace tune-up maintenance on older unit in accordance with annual service agreement. System was found to be functioning properly with no operational issues identified. Completed standard preventative maintenance procedures and documented electrical panel condition.
Responded to no-heat service call on a 20+ year old furnace showing diagnostic codes related to pressure switch issues. Upon inspection, cleaned components and cycled system multiple times, successfully restoring proper operation with no error codes returning. Identified clogged blower as underlying issue; recommended and replaced both blower motor and circuit board to ensure reliable system performance.
Completed comprehensive repiping work to address leaking copper piping. Removed damaged sections and installed new PVC supply lines with proper mounting brackets throughout the ceiling infrastructure. Implemented water care treatment to protect the newly installed system and prevent future corrosion issues.
Responded to service call for inoperative water heater. Diagnosed leaking tank in existing unit. Removed failed water heater and installed new 50-gallon Bradford White natural gas standard vent water heater. Completed all necessary connections, verified proper function, and ensured installation complies with code requirements.
Replaced malfunctioning thermostat that was operating intermittently with new Honeywell T4 WiFi thermostat. Performed complete wiring configuration despite absence of C-wire. Verified proper operation of new thermostat and confirmed furnace heating mode functionality with successful heating call.
Replaced non-functional 2004 Bradford power vent water heater due to seized blower motor that was causing no hot water. Installed new 50-gallon LP power vented water heater with proper venting through exterior wall, restoring hot water service to the residence.
Inspected Morton System Saver water softener that was not using salt due to salt bridge formation. Broke up salt bridge, cleaned brine tank, and performed system reset. Unit now functioning properly with normal salt consumption resumed.
Responded to service call for water softener leak. Discovered leak at bypass valve on main floor softener unit. Removed the leaking water softener and looped the existing 3/4" PEX lines together to maintain system functionality. Note: property was originally a duplex with dual softener systems; second softener remains in place and operational.
Performed semi-annual agreement maintenance service on furnace of indeterminate age. Completed comprehensive inspection including heat exchanger (camera inspection), venting, exhaust flue, burners, blower, inducer, all safety switches, flame sensor, igniter, and gas pressures. Noted rust damage inside furnace cabinet caused by condensate drainage issues from evaporator coil. System currently operating normally.
Responded to emergency service call for a pin hole leak on a copper elbow fitting connected to customer's water softener in the basement. Successfully repaired the compromised joint and also completed installation of a new kitchen faucet as requested. Utilized protective tarping during repair to prevent water damage to surrounding areas.
Responded to alert code 31 on thermostat for heat system with communication failure. Replaced thermostat which resolved initial code issue, however discovered no power to outdoor heat pump. Located tripped breaker that would not reset even after disconnecting heat pump. Determined electrical issue beyond HVAC scope; customer advised to schedule electrician to inspect circuit/breaker.
Performed scheduled furnace preventive maintenance, responding to intermittent startup issues. Inspected and tested all system components, including LP gas nozzle that was suspected of requiring cleaning. Evaluation of ductwork and combustion components showed normal operation with no malfunctions detected. System is currently operating within specifications.
Responded to a service call regarding a toilet leak. Upon inspection, found the toilet had been shut off due to leakage issues. Removed the existing toilet, replaced the wax ring seal, and reinstalled the unit properly. Tested for proper operation and verified no leaks were present after repair.
Diagnosed American brand natural gas water heater with no hot water issue; confirmed customer's suspicion of faulty thermocouple and identified failed pilot assembly as root cause. Provided customer with replacement options and estimates for new water heater installation.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.