Plumbing, Electrical, and HVAC company in Plymouth, MN
We’ve assisted homeowners for over 65 years and will proudly service your home as well.
Highly Rated
Satisfaction Guaranteed
0% Financing
Friendly Technicians
A split-level near Medicine Lake can give us a very different set of comfort problems from a larger western Plymouth home with multi-stage equipment and multiple zones. Much of the city grew during the 1970s through 1990s, so aging ductwork and mechanical systems are now a regular part of the service picture across the West Metro. Hurlburt Heating, AC, Plumbing, & Electrical provides heating, cooling, plumbing, electrical, and indoor air quality service throughout Plymouth. Call [site_info_phone_number] or connect online to schedule service.
Whether you’re dealing with sparking outlets or a leaky faucet, make Hurlburt your first call. We’ll get your house back to normal fast!
Plymouth Homes Reflect Several Decades of West Metro Growth
Plymouth’s late-20th-century building boom left the city with a large number of split-level and multi-level homes that now have 30- to 50-year-old duct systems and equipment that may already have been replaced once. Western neighborhoods in the Wayzata Schools catchment include larger executive properties that can use high-capacity, multi-stage systems, while older homes around Medicine Lake may have boilers, radiant heat, or different cooling arrangements.
The housing changes again around Hamel and Old Hamel, where the northwest part of Plymouth retains a more rural identity. French Regional Park on Medicine Lake, Parkers Lake, Millennium Garden, the Hilde Performance Center, and the Luce Line Trail are familiar markers across a city that has expanded through several distinct residential areas. Plymouth also has a sizable townhome and condo footprint, along with strict municipal permitting that applies when mechanical systems are replaced.
Air Conditioning Services in Plymouth, MN
Humid summer weather can expose airflow problems quickly in Plymouth’s split-level and multi-level homes. Upper floors may stay warmer when older ducts are undersized, poorly balanced, or simply showing their age after several decades of use. Spring tree and grass pollen also increases filtration concerns before the cooling season reaches its peak, especially as outdoor activity picks up around East Medicine Lake Park and the Luce Line Trail. Central split systems remain the standard cooling setup across much of the city.
Air conditioning and indoor air quality services include:
Air conditioning replacement
Air conditioning repair
Air conditioning maintenance
Ductless systems
Indoor air quality services
Larger custom homes in the western Wayzata Schools area may use higher-capacity or multi-stage equipment, while older lakeside properties can have boiler or radiant heat paired with a different cooling arrangement. Aging ductwork is also driving demand for duct sealing, air purification, and humidity control throughout Plymouth. When one level of the home stays warmer, replacing the outdoor unit alone may not solve the problem. We need to know how air is moving through the existing ducts before deciding what needs attention.
Electrical services include:
Electrical repair services
Electrical installation and wiring
Whole-home generators
Switches, outlets, and ceiling fans
Panel replacement and repair
EV chargers
Smart home installations
An established home near Parkers Lake may have gone through several rounds of equipment upgrades since it was built, while newer western properties may start with more modern infrastructure. Townhome and condo communities add compact installation spaces and HOA requirements that can affect how projects are approached. Plymouth’s strong interest in high-efficiency equipment and modern controls means electrical work often needs to account for what has already been added to the house. The panel and wiring have to be evaluated as part of that bigger picture.
Heating Services in Plymouth, MN
Plymouth winters can push heating equipment hard for months at a time. Severe sub-zero cold creates immediate furnace concerns, while the first autumn startup can produce the familiar burning-dust smell that sends homeowners checking whether the system is operating normally. Forced-air natural gas furnaces are the standard residential setup across much of the city, but older properties around Medicine Lake and custom estates can include boilers or in-floor radiant heat. The winter conditions familiar around places such as Plymouth Ice Center can arrive quickly once fall gives way to sustained cold.
Heating services include:
Heating installation
Heating replacement
Heating repair
Heating maintenance
Heat pumps
Furnaces
Boilers
Geothermal
Plymouth weather is also known for rapid reversals. A March “false spring” can be followed by another late-season blizzard, while May and September can move quickly between heating and cooling. High-efficiency systems and heat pumps are gaining interest in the market, supported by the Xcel Energy and CenterPoint Energy rebate opportunities. A larger home in western Plymouth may call for multi-stage equipment, while a lakeside property can have a hydronic setup that needs a completely different service plan.
Plumbing Services in Plymouth, MN
Plumbing work in Plymouth often takes place in homes where the mechanical equipment has changed several times since the original construction. A water heater may have been replaced years after the furnace, while boilers, radiant systems, and newer HVAC equipment may share utility space in older properties. Larger custom homes can have more extensive plumbing layouts, while townhomes and condos tend to have compact equipment configurations. That variation is common across a city that grew heavily during the 1970s, 1980s, and 1990s.
Plumbing services include:
Plumbing repair
Plumbing installation
Leak detection and repair
Sewer and drain service
Water heaters
Sump pumps
Water treatment
Gas lines
Older homes around Medicine Lake and established neighborhoods near central Plymouth may also have several generations of mechanical equipment sharing the same utility area. That makes available space and existing connections important when a water heater, gas line, or other plumbing component needs work. Homes farther west or in managed communities can present a different layout, but the first step is still understanding what is already installed.
Your Friendly Plymouth Neighborhood Team
Plymouth is one of the largest cities in Minnesota. The good news is this means you can always find something to do. For example, if we’re repairing your plumbing, you can take a nature walk at Clifton E. French Regional Park. Or, if we’re installing a new AC, you can go enjoy craft beer
at Luce Line Brewing. Prefer to do something educational? Check out the Plymouth Historical Museum while we take care of your heater.
Neighborhoods We Serve in Plymouth Include:
Southwest Plymouth
Southern Plymouth
Parkers Lake
Medicine Lake / French Park
Top-Notch Home Services Company in Plymouth
Choose Hurlburt whenever you need electrical, plumbing, heating and cooling services. Our team of more than 60 professionals includes professional plumbers and electricians. We also have 65+ years of industry experience, and all installations include a 12-month warranty. We provide high-quality work, and we always put people first.
Are you looking for an electrical, plumbing, or HVAC company in Plymouth? Reach out to our team of experts today!
Recent Jobs and Reviews in Plymouth, MN
Plymouth, MN at a glance
Hurlburt Heating & Plumbing has completed 20 jobs in Plymouth, MN between May 2026 and June 2026.
The most recent job was on June 17, 2026.
Hurlburt Heating & Plumbing has completed 185 jobs in Plymouth, MN in the last 12 months. The first job there was in October 2025.
Job Locations and Reviews
Drew D.Checked in
Completed rough-in plumbing installation for future laundry sink in utility room. Accessed powder room plumbing through shared wall to tap into existing drain and water lines. Installed 1-1/2" drain line connecting to powder room stack with proper venting tied into existing vent system. Added cleanouts to powder sink stack with arm cleanout extending into 24" deep cabinet for future access. Routed drain, waste, venting, and water supply lines through dead space behind cabinet locations to accommodate customer-supplied 18"x24"x10" drop-in utility sink and pull-down faucet. Installed blue-handled shut-off valves on water supply lines and secured all piping to wall framing with appropriate mounting brackets. Pressurized system and conducted leak test on all new connections with no leaks detected. All rough-in work positioned for final fixture installation after cabinetry and countertops are completed.
Plymouth, MN 55446
Jarrod S.Checked in
Responded to refrigerator water line leak caused by improperly tightened connection. Identified problematic pierce valves on both the reverse osmosis system and refrigerator supply lines. Replaced pierce valves with tee fittings and quarter-turn angle stops for improved shutoff capability and future serviceability. Removed inline filter from refrigerator supply line, disconnected and removed shark bite fittings, and reconnected water line to refrigerator with proper connections to eliminate leak.
Plymouth, MN 55447
Charles P.Checked in
Responded to call for water leak in residential utility closet. Upon inspection, identified slow leak in CPVC water supply line near water heater installation. Removed damaged section of CPVC pipe and installed new section using appropriate fittings and primer/cement. Tested system under pressure to verify leak was eliminated and connections were secure. Restored water service to property.
Plymouth, MN 55446
Ali T.Checked in
Completed spring preventive maintenance inspection on 4-year-old Daikin air conditioning system and wall furnace per maintenance agreement. Performed comprehensive AC tune-up including operational testing of outdoor condenser unit and indoor air handler, verified refrigerant levels and electrical connections, inspected condensate drainage system and PVC venting configuration on furnace unit. All equipment found operational with no deficiencies noted; system performing within manufacturer specifications.
Plymouth, MN 55441
Roger M.Checked in
Completed routine spring maintenance tune-up on residential air conditioning system and furnace. During inspection, discovered a cracked heat exchanger in the furnace, which poses a safety hazard and requires immediate replacement. Performed comprehensive system evaluation of both HVAC units, with outdoor condenser unit and indoor equipment found otherwise operational per annual preventive maintenance agreement.
Plymouth, MN 55446
Jarrod S.Checked in
Responded to service call for leaky outdoor shut-off valve on irrigation system. Upon inspection, diagnosed failed ball valve within the irrigation vacuum breaker assembly. Removed defective vacuum breaker and installed new replacement unit with brass fittings and blue-handled ball valves to restore proper operation and eliminate leak.
Plymouth, MN 55442
Jon W.Checked in
Responded to no cooling complaint on 22-year-old residential air conditioning system. Upon inspection, discovered mouse nest in electrical compartment causing compressor failure. Found failed contactor and failing capacitor preventing outdoor unit operation while indoor furnace fan continued to run. System operates on obsolete R22 refrigerant. Removed rodent debris from electrical compartment and documented multiple component failures. Additional inspection of indoor furnace unit revealed oil leaking from blower motor and heat exchanger showing signs of temperature stress consistent with age of equipment. Due to age of system, obsolete refrigerant type, multiple failed components, and overall condition of both heating and cooling equipment, recommended full system replacement rather than repair. Documented conditions with photographs showing debris accumulation in outdoor unit and interior mechanical equipment layout. Scheduled same-day estimate for complete HVAC system replacement.
Plymouth, MN 55446
Craig M.Checked in
Responded to callback for HVAC unit that continued running and could not be turned off following previous day's service. Found system had been bypassed from prior work. Identified and corrected the issue, restoring proper thermostat control and normal system operation.
Plymouth, MN 55441
Eric V.Checked in
Completed comprehensive A/C maintenance on Bryant system with 410A refrigerant under ambient conditions of 67°F outdoor temperature. Performed full system inspection including air filter, Honeywell thermostat operation, temperature differential measurement, condenser unit, evaporator and condenser coils, blower motor, capacitor testing, compressor function, refrigerant charge level, and condensate drain line. Found capacitor reading slightly out of manufacturer specifications and recommended replacement with 45+5 MFD dual capacitor, which was declined by homeowner. System appears to be potentially low on refrigerant by less than one pound; recommended monitoring cooling performance and operational efficiency. All other components inspected and found to be functioning within normal parameters. System currently operating satisfactorily with no immediate service concerns.
Plymouth, MN 55446
Craig M.Checked in
Responded to commercial facility with four rooftop units down. Successfully replaced failed condenser fan motor on RTU 32, restoring unit to operational status. Performed comprehensive diagnostics on remaining three units. Found RTU 30 low on R-410A refrigerant; added refrigerant and UV dye to system for leak detection monitoring. Identified RTU 37 and RTU 40 both completely flat on R-22 refrigerant, indicating significant refrigerant loss requiring further repair. All work completed during four-hour service call with parts sourced from wholesale supplier.
Plymouth, MN 55441
Jarrod S.Checked in
Responded to water leak at carbon filter connection in utility room. Inspected water filtration system and identified active leak at coupling between main water line and house water filter housing. Evaluated existing water treatment equipment including softener, filtration unit, and associated plumbing connections. Discussed water conditioning system replacement options and water heater upgrade with homeowner for future consideration.
Plymouth, MN 55447
Jarrod S.Checked in
Installed water filtration system on existing handheld shower unit in residential bathroom. Removed chrome and white handheld showerhead from wall mount, attached inline filter cartridge between shower arm and showerhead assembly, and securely reinstalled unit to ensure proper water flow and no leaks. Verified system operation and confirmed filter was functioning correctly.
Plymouth, MN 55447
Jarrod S.Checked in
Responded to no hot water complaint on 75-gallon residential water heater. Upon inspection, pilot flame would not remain lit and extinguished after several seconds, indicating faulty thermocouple preventing proper gas valve operation. Due to age and condition of unit, recommended full water heater replacement rather than repair. Customer accepted replacement proposal. Successfully removed existing water heater from basement utility area and installed new residential tanked water heater with proper venting, copper supply line connections, and safety valve installations per code requirements. Tested all connections for leaks, verified proper pilot ignition and burner operation, and confirmed hot water delivery throughout system.
Plymouth, MN 55442
Moe R.Checked in
Responded to no cool call on 18-year-old Carrier air conditioning system. Upon arrival, found system not running or blowing air. Diagnosed failed ECM blower motor and module by testing voltage at blower connections—voltage present but motor not responding. Observed strong electrical burning odor emanating from blower compartment, confirming component failure. Discovered extremely dirty air filter, which was determined to be the likely cause of motor overheating and subsequent failure. Unable to perform complete system evaluation as unit cannot operate continuously in current condition. Documented failed components with photos showing blower motor assembly, internal wiring connections, and overall system configuration. Reviewed repair options with homeowner and submitted parts order request for pricing and availability. Scheduled follow-up appointment with service advisor to discuss replacement options and system evaluation once blower motor is operational.
Plymouth, MN 55441
Moe R.Checked in
Completed comprehensive cooling maintenance inspection on 10-year-old Bryant air conditioning system. Verified contactor, capacitor, and control board operation within specifications. Confirmed proper refrigerant charge levels and measured temperature drop at 19 degrees, indicating optimal system performance. Inspected outdoor condenser coil and found clean with acceptable amp draws across all components. Examined indoor evaporator coil and furnace filter, both in clean condition. Identified missing refrigerant line caps and installed replacements to prevent contamination and moisture intrusion. All system components operating properly with no deficiencies noted.
Plymouth, MN 55446
Eric V.Checked in
Completed membership A/C tune-up on one condenser unit with R-410A refrigerant under optimal conditions at 79°F ambient temperature. Performed comprehensive maintenance including inspection of motors, filter, drain line, capacitor, compressor, and contactor; cleaned outdoor coil to restore efficiency. System evaluation revealed refrigerant charge slightly low with temperature split at 17 degrees, and contactor showing signs of deterioration requiring replacement. Presented repair options for refrigerant recharge and contactor replacement, which were declined at this time. Unit remains operational and providing adequate cooling despite noted deficiencies.
Plymouth, MN 55446
Roger M.Checked in
Responded to water leak complaint originating from HVAC system with water intrusion affecting adjacent guest room wall. Upon inspection, identified A-coil improperly pitched, causing condensate drainage issues and water accumulation. Documented existing installation deficiency with photographs showing equipment positioning and affected areas. Install manager to follow up regarding corrective measures to properly pitch A-coil and resolve drainage problem.
Plymouth, MN 55446
Kyle F.Checked in
Responded to multiple plumbing issues throughout the townhome including non-functioning toilet, seized garbage disposal, and drainage problems at multiple sink locations. Diagnosed faulty fill valve in basement toilet and replaced unit, restoring proper fill operation. Removed and replaced completely seized garbage disposal unit in kitchen, testing for proper operation and drainage. Addressed water pressure issues at lavatory sink and master bathroom right sink by removing, cleaning, and reinstalling clogged aerators. Serviced stuck pop-up assemblies on both lavatory sink and left side of master bathroom double sink by disassembling, cleaning debris, and adjusting linkage mechanisms for proper operation. Conducted final testing of all repaired fixtures including toilet flush and fill cycle, disposal grinding and drainage, sink water flow and pressure, and pop-up drain assembly function to verify complete resolution of all reported issues.
Plymouth, MN 55446
Craig M.Checked in
Responded to no cooling complaint with offices at 81 degrees. Inspected seven rooftop units and found four units down. Diagnosed Unit 32 requiring condenser fan motor replacement and placed parts order. Identified communication issues between thermostats and remaining affected units, potentially related to economizer controls. Additional troubleshooting needed on units with suspected mechanical failures, as complete diagnosis requires further commercial equipment expertise.
Plymouth, MN 55441
Moe R.Checked in
Responded to a no cool call on a 12-year-old Lennox air conditioning system. Upon inspection, diagnosed the unit as low on R410A refrigerant by approximately 5 pounds, indicating a leak in the system. Discussed repair options with the homeowner, who requested a service advisor consultation to review replacement alternatives. Provided detailed repair options via email for homeowner consideration.
“Mark was very pleasant to work with! He was on time and took care of my plumbing needs efficiently and effectively. I would definitely use him again for any plumbing issues I may have. I have been using Hurlburt for all of my heating, plumbing, and electrical needs and have always been satisfied!”
Alison A.
“Great service! Professionals starting from the first person I spoke to on the phone and finalizing with the person who finished the installation and cleaned up after. Staff explained everything well. Highly recommended!!!”
Jessica F.
"Outstanding service as always! Hurlburt goes above and beyond for their customers. We got scheduled right away, and Shawn did a great job. I will continue to use these guys for everything!!!"
Nicole T.
"Our technician Mike was just awesome. Took the time to show me what he was doing and explained why he was doing it. Gave me an honest evaluation of my situation. You can’t go wrong with Hurlburt and the work ethics of the employees."
Jean C.
Trevor came to service our AC unit. Very happy with his work. Trevor was friendly and knowledgeable, and got our issue fixed quickly. Hurlburt Heating and Plumbing is a great company to work with."
Debbie L.
"Hurlburt has helped us out with both plumbing and HVAC services in the past and have always done a great job. All their technicians, especially Mark, have been kind, professional, and quick with service!"