Plumbing, Electrical, and HVAC company in Plymouth, MN
We’ve assisted homeowners for over 65 years and will proudly service your home as well.
Highly Rated
Satisfaction Guaranteed
0% Financing
Friendly Technicians
A split-level near Medicine Lake can give us a very different set of comfort problems from a larger western Plymouth home with multi-stage equipment and multiple zones. Much of the city grew during the 1970s through 1990s, so aging ductwork and mechanical systems are now a regular part of the service picture across the West Metro. Hurlburt Heating, AC, Plumbing, & Electrical provides heating, cooling, plumbing, electrical, and indoor air quality service throughout Plymouth. Call [site_info_phone_number] or connect online to schedule service.
Whether you’re dealing with sparking outlets or a leaky faucet, make Hurlburt your first call. We’ll get your house back to normal fast!
Plymouth Homes Reflect Several Decades of West Metro Growth
Plymouth’s late-20th-century building boom left the city with a large number of split-level and multi-level homes that now have 30- to 50-year-old duct systems and equipment that may already have been replaced once. Western neighborhoods in the Wayzata Schools catchment include larger executive properties that can use high-capacity, multi-stage systems, while older homes around Medicine Lake may have boilers, radiant heat, or different cooling arrangements.
The housing changes again around Hamel and Old Hamel, where the northwest part of Plymouth retains a more rural identity. French Regional Park on Medicine Lake, Parkers Lake, Millennium Garden, the Hilde Performance Center, and the Luce Line Trail are familiar markers across a city that has expanded through several distinct residential areas. Plymouth also has a sizable townhome and condo footprint, along with strict municipal permitting that applies when mechanical systems are replaced.
Air Conditioning Services in Plymouth, MN
Humid summer weather can expose airflow problems quickly in Plymouth’s split-level and multi-level homes. Upper floors may stay warmer when older ducts are undersized, poorly balanced, or simply showing their age after several decades of use. Spring tree and grass pollen also increases filtration concerns before the cooling season reaches its peak, especially as outdoor activity picks up around East Medicine Lake Park and the Luce Line Trail. Central split systems remain the standard cooling setup across much of the city.
Air conditioning and indoor air quality services include:
Air conditioning replacement
Air conditioning repair
Air conditioning maintenance
Ductless systems
Indoor air quality services
Larger custom homes in the western Wayzata Schools area may use higher-capacity or multi-stage equipment, while older lakeside properties can have boiler or radiant heat paired with a different cooling arrangement. Aging ductwork is also driving demand for duct sealing, air purification, and humidity control throughout Plymouth. When one level of the home stays warmer, replacing the outdoor unit alone may not solve the problem. We need to know how air is moving through the existing ducts before deciding what needs attention.
Electrical services include:
Electrical repair services
Electrical installation and wiring
Whole-home generators
Switches, outlets, and ceiling fans
Panel replacement and repair
EV chargers
Smart home installations
An established home near Parkers Lake may have gone through several rounds of equipment upgrades since it was built, while newer western properties may start with more modern infrastructure. Townhome and condo communities add compact installation spaces and HOA requirements that can affect how projects are approached. Plymouth’s strong interest in high-efficiency equipment and modern controls means electrical work often needs to account for what has already been added to the house. The panel and wiring have to be evaluated as part of that bigger picture.
Heating Services in Plymouth, MN
Plymouth winters can push heating equipment hard for months at a time. Severe sub-zero cold creates immediate furnace concerns, while the first autumn startup can produce the familiar burning-dust smell that sends homeowners checking whether the system is operating normally. Forced-air natural gas furnaces are the standard residential setup across much of the city, but older properties around Medicine Lake and custom estates can include boilers or in-floor radiant heat. The winter conditions familiar around places such as Plymouth Ice Center can arrive quickly once fall gives way to sustained cold.
Heating services include:
Heating installation
Heating replacement
Heating repair
Heating maintenance
Heat pumps
Furnaces
Boilers
Geothermal
Plymouth weather is also known for rapid reversals. A March “false spring” can be followed by another late-season blizzard, while May and September can move quickly between heating and cooling. High-efficiency systems and heat pumps are gaining interest in the market, supported by the Xcel Energy and CenterPoint Energy rebate opportunities. A larger home in western Plymouth may call for multi-stage equipment, while a lakeside property can have a hydronic setup that needs a completely different service plan.
Plumbing Services in Plymouth, MN
Plumbing work in Plymouth often takes place in homes where the mechanical equipment has changed several times since the original construction. A water heater may have been replaced years after the furnace, while boilers, radiant systems, and newer HVAC equipment may share utility space in older properties. Larger custom homes can have more extensive plumbing layouts, while townhomes and condos tend to have compact equipment configurations. That variation is common across a city that grew heavily during the 1970s, 1980s, and 1990s.
Plumbing services include:
Plumbing repair
Plumbing installation
Leak detection and repair
Sewer and drain service
Water heaters
Sump pumps
Water treatment
Gas lines
Older homes around Medicine Lake and established neighborhoods near central Plymouth may also have several generations of mechanical equipment sharing the same utility area. That makes available space and existing connections important when a water heater, gas line, or other plumbing component needs work. Homes farther west or in managed communities can present a different layout, but the first step is still understanding what is already installed.
Your Friendly Plymouth Neighborhood Team
Plymouth is one of the largest cities in Minnesota. The good news is this means you can always find something to do. For example, if we’re repairing your plumbing, you can take a nature walk at Clifton E. French Regional Park. Or, if we’re installing a new AC, you can go enjoy craft beer
at Luce Line Brewing. Prefer to do something educational? Check out the Plymouth Historical Museum while we take care of your heater.
Neighborhoods We Serve in Plymouth Include:
Southwest Plymouth
Southern Plymouth
Parkers Lake
Medicine Lake / French Park
Top-Notch Home Services Company in Plymouth
Choose Hurlburt whenever you need electrical, plumbing, heating and cooling services. Our team of more than 60 professionals includes professional plumbers and electricians. We also have 65+ years of industry experience, and all installations include a 12-month warranty. We provide high-quality work, and we always put people first.
Are you looking for an electrical, plumbing, or HVAC company in Plymouth? Reach out to our team of experts today!
Recent Jobs and Reviews in Plymouth, MN
Plymouth, MN at a glance
Hurlburt Heating & Plumbing has completed 20 jobs in Plymouth, MN between July 2026 and August 2026.
The most recent job was on August 7, 2026.
Hurlburt Heating & Plumbing has completed 185 jobs in Plymouth, MN in the last 12 months. The first job there was in October 2025.
Job Locations and Reviews
Tony C.Checked in
Installed new brushed stainless steel kitchen faucet with high arched spout at single-family residence. Connected faucet supply lines to existing shutoff valves and verified proper water flow and drainage through double-basin stainless steel sink. Cleared basement toilet obstruction using closet auger, restoring proper flush function and drainage.
Plymouth, MN 55442
Craig M.Checked in
Responded to gas leak emergency at residential property where gas supply had been shut off for safety. Located and identified leak at underground fitting near fence line that connected two gas lines. Presented options to either cap the leaking line or replace the entire gas line run, with sales team scheduled to provide quote for new gas line installation from meter along house to deck grill location.
Plymouth, MN 55447
Jon W.Checked in
Completed annual cooling maintenance on 9-year-old air conditioning system. Replaced failing capacitor, outdoor temperature sensor batteries, and malfunctioning main level zone thermostat that was causing continuous fan operation when system was off. Verified all other components operating within specifications with proper refrigerant levels and system confirmed operational upon completion.
Plymouth, MN 55447
Nate S.Checked in
Responded to callback for excessive indoor humidity levels reading at 73%. Adjusted system airflow from 1200 CFM to 1050 CFM and disabled dehumidification mode on Lennox thermostat to optimize system performance. Upon adjustment, indoor humidity decreased to 69% with system cooling to setpoint of 70°F.
Plymouth, MN 55447
Jared R.Checked in
Responded to callback for air conditioning system not cooling. Upon arrival, found furnace control board not powered and 24V fuse open. Reset fuse and cycled system to restore operation. Performed comprehensive system check including thermostat wiring, control board connections, condenser operation, and capacitor testing—all components functioning within normal parameters. Addressed thermostat programming concerns by removing batteries, verifying C wire connection, and instructing occupants on proper use of Hold function to override scheduling feature. System restored to normal cooling operation.
Plymouth, MN 55446
Alton S.Checked in
Responded to no cooling complaint on residential split system air conditioning unit. Upon arrival, verified thermostat was calling for cooling at 75 degrees setpoint. Inspected air filter and blower speeds, both found satisfactory. Observed outdoor unit contactor not receiving 24V control voltage from thermostat, though 240V line voltage was present. Tested capacitor, found within specifications. Discovered outdoor coil heavily blocked with cottonwood debris, restricting airflow. Cleaned condenser coil thoroughly, restoring proper airflow. Replaced thermostat batteries and verified wire connections secure.
During further inspection, found blower operating at lowest speed setting and reset button on furnace door switch tripped. Reset safety switch, restoring unit operation. Cycled power to system by disconnecting and reconnecting wiring to confirm proper startup. Checked refrigerant charge and found system operating below optimal levels. Measured supply and return air temperature diffe
Plymouth, MN 55446
Nate S.Checked in
Responded to warranty no-cool call on recently installed system that was not maintaining temperature. Upon inspection, discovered incorrect dip switch configuration on the control board. Corrected settings by turning off dip switches 1 and 4, while activating dip switches 2 and 3 per manufacturer specifications. Verified proper system operation with supply air temperature measuring 57.2°F at register, confirming adequate cooling performance and resolving the issue.
Plymouth, MN 55447
Ali T.Checked in
Responded to no cool condition on 10+ year old unit blowing hot air. Diagnosed and replaced failed capacitor and thoroughly cleaned plugged condenser coil to restore proper system operation and cooling performance.
Plymouth, MN 55446
Jarrod S.Checked in
Relocated Rheem Platinum water heater approximately 4 inches to the right to provide adequate clearance for furnace filter access and replacement. Repositioned unit with all copper supply lines, fittings, and connections maintained in proper working order.
Plymouth, MN 55441
Koshoua V.Checked in
Completed comprehensive AC tune-up and maintenance inspection on Bryant condensing unit and Lennox thermostat system. Verified thermostat operation and programming, inspected air filter condition, examined blower assembly components, tested electrical connections including contactor and capacitor, checked condensate drain line for proper flow, and measured refrigerant performance with temperature split readings. Noted outdoor coil requires cleaning due to accumulated debris and dirt buildup. All electrical readings, refrigerant levels, and system performance measurements within manufacturer specifications with no mechanical defects or safety hazards identified. System currently operating properly. Recommended maintaining regular filter changes, scheduling periodic coil cleaning for both indoor and outdoor units, and continuing routine preventive maintenance to ensure optimal efficiency and longevity.
Plymouth, MN 55447
Ali T.Checked in
Responded to service call for zone valve malfunction. Replaced defective zone valve power head on hydronic heating system. Accessed equipment in basement mechanical area, removed failed actuator, and installed new power head assembly. Verified proper valve operation and system functionality upon completion. Total repair time was approximately 3 hours.
Plymouth, MN 55446
Jon W.Checked in
Performed home sale inspection on 20-year-old furnace and air conditioning system. Furnace inspection revealed critical safety hazard with carbon monoxide levels exceeding 700 ppm in the flue due to secondary heat exchanger rusted through from inside out, causing carbon monoxide leakage into living space. Additional findings included failing flame sensor and ignitor, plus control board exhibiting burn marks around resistors. Unit red-tagged as unsafe to operate. Air conditioning inspection showed system fully operational with proper refrigerant charge, 19-degree temperature split across evaporator coil, and all components testing within manufacturer specifications. Scheduled furnace replacement estimate. Recommend immediate furnace replacement due to life safety concerns.
Plymouth, MN 55442
Kyle F.Checked in
Responded to a floor drain backup occurring when the washing machine was in use. Upon inspection, diagnosed debris buildup in the drain line restricting proper flow and causing the floor drain to overfill. Utilized a flex shaft machine to clear the obstruction from the drain line, running water simultaneously to flush debris and restore proper drainage. Tested the system by filling and dumping the laundry tub multiple times to verify the floor drain no longer overflowed, confirming all components were functioning correctly upon completion.
Plymouth, MN 55447
Jarrod S.Checked in
Responded to main bathroom faucet repair request. Upon inspection, identified loose faucet handles and deteriorated aerator causing improper water flow. Adjusted both hot and cold water handles to restore proper operation, replaced faulty aerator, and replaced worn washer to eliminate leak. All fixtures tested and confirmed functioning properly upon completion.
Plymouth, MN 55442
Jarrod S.Checked in
Responded to water leak under kitchen sink occurring intermittently without sink or dishwasher use. Upon inspection, identified backed-up drain line causing water to overflow from P-trap assembly when water softener discharged. Confirmed drain blockage was preventing proper drainage of softener discharge water, resulting in backup through sink drain system. Documented plumbing configuration including white PVC P-trap assembly, supply lines, and connections. Scheduled drain technician for follow-up service to clear obstruction and restore proper drainage function.
Plymouth, MN 55442
Jon W.Checked in
Responded to no cooling complaint on 11-year-old residential air conditioning system. Found failed capacitor causing unit malfunction. Replaced capacitor and performed comprehensive system evaluation, identifying failing contactor and condenser fan motor with oil leakage. Verified refrigerant charge within acceptable parameters. Replaced capacitor, contactor, and condenser fan motor to restore full system operation and prevent imminent failures. System tested and confirmed operational upon completion.
Plymouth, MN 55446
Jared R.Checked in
Replaced heat exchanger under parts warranty from Trane. Removed and installed replacement heat exchanger assembly, ensuring proper sealing and alignment. Cycled system in heating mode and verified normal operation. Checked gas pressure and combustion air levels to confirm safe and efficient operation. All system components functioning within manufacturer specifications.
Plymouth, MN 55446
Eric V.Checked in
Completed comprehensive preventative maintenance on Bryant heating and cooling system under agreement terms. Performed full AC maintenance on one R22 condenser unit (model 2DSX3018G1000AA) including inspection of filter, thermostat, temperature split, condenser coils, motors, capacitors, compressor, refrigerant charge level, and condensate drain line. Conducted heating system tune-up with inspection of gas valve assembly, blower motor, control board, combustion chamber, and venting system. All components tested and found operating within normal parameters at 69-degree ambient temperature with proper airflow and refrigerant levels confirmed.
Plymouth, MN 55441
Scott N.Checked in
Responded to a water leak issue caused by a pinhole in the copper pipe located directly above the water meter. The customer had previously applied a temporary patch but requested a permanent repair. Upon inspection, confirmed the pinhole leak in the copper piping and proceeded with cutting out the damaged section. Installed new copper pipe section using appropriate fittings and soldered connections to ensure a watertight seal. Tested the repair under normal water pressure to verify no leaks were present. The water supply remained operational throughout the service, requiring only brief shutoff during the pipe replacement. All work was completed to code standards with proper support and securing of the new pipe section.
Plymouth, MN 55441
Nate S.Checked in
Responded to no-cool call on 14-year-old residential HVAC system. Upon inspection, diagnosed failed capacitor preventing compressor operation. Replaced defective capacitor with properly-rated component, restoring full cooling functionality. System tested and verified operational with normal temperature differential and proper amperage draw.
“Mark was very pleasant to work with! He was on time and took care of my plumbing needs efficiently and effectively. I would definitely use him again for any plumbing issues I may have. I have been using Hurlburt for all of my heating, plumbing, and electrical needs and have always been satisfied!”
Alison A.
“Great service! Professionals starting from the first person I spoke to on the phone and finalizing with the person who finished the installation and cleaned up after. Staff explained everything well. Highly recommended!!!”
Jessica F.
"Outstanding service as always! Hurlburt goes above and beyond for their customers. We got scheduled right away, and Shawn did a great job. I will continue to use these guys for everything!!!"
Nicole T.
"Our technician Mike was just awesome. Took the time to show me what he was doing and explained why he was doing it. Gave me an honest evaluation of my situation. You can’t go wrong with Hurlburt and the work ethics of the employees."
Jean C.
Trevor came to service our AC unit. Very happy with his work. Trevor was friendly and knowledgeable, and got our issue fixed quickly. Hurlburt Heating and Plumbing is a great company to work with."
Debbie L.
"Hurlburt has helped us out with both plumbing and HVAC services in the past and have always done a great job. All their technicians, especially Mark, have been kind, professional, and quick with service!"