We’ve assisted homeowners for over 65 years and will proudly service your home as well.
Minnetonka is famous for its cold winters. The Afton Alps and Buck Hill are a blast to ski, and the icy waters of Lake Minnetonka are prime for ice fishing. But to really enjoy those cold-weather activities, you need a cozy place to come home to. Our team can expertly repair, maintain, and install heating systems while helping keep your heating bills down all winter long.
Depend On Us for These Heating and Furnace Solutions:
- Heating repair: A malfunctioning heat exchanger or blower motor causes the heater to use more energy and wear out internal components. From gas valve issues to malfunctioning burner assemblies, we can fix them all.
- Heating installation: We do installations for gas and electric heaters as well as energy-efficient heat pumps to lower your heating costs.
- Heating maintenance: Get your furnace serviced once a year when you sign up for the Hurlburt Family Rewards Program. You’ll save on repairs and accessories and get considerable discounts when it’s time for a heating replacement.
The efficiency of your air conditioning system impacts your ability to relax at home when the weather heats up. We fix issues like refrigerant leaks and blocked air filters so that your home stays cool in the summer. Our installation services help you achieve first-rate air conditioning year-round. When you’re done enjoying water sports at the lake or Minnetonka Mills Park, you don’t have to sweat at home.
We Offer Professional Cooling Services:
- Cooling repair: Stop struggling with weak airflow and inconsistent cooling. Our technicians repair blower motors, frozen evaporator coils, clogged condensate drains, and more.
- Cooling installation: Our installation support is key to selecting the best cooling system for your home. You’ll enjoy cheaper cooling costs and better air quality. We can help you decide if it might make sense to go ductless, too.
- Cooling maintenance: Take advantage of the Hurlburt Family Rewards Program to make your air conditioner last longer and consume less energy. We’ll help you avoid expensive repairs with our yearly tune-up.
See all of our HVAC services in Minnetonka.
Water seepage and pipe corrosion can weaken your home’s framework, causing problems with its foundation. Mold can grow in damp environments caused by leaks. Water bills will skyrocket from even small faucet drips. A plumber from Hurlburt knows how to find and fix these problems. Our hard water in Minnetonka takes a toll on pipes and appliances, so you may want to try our water treatment options as well.
See all of our plumbing services in Minnetonka.
Your electrical system is too important to leave to a company that doesn’t truly care about your safety and comfort. Whether you have a safety hazard or just want complete control over your home illumination with smart lights, we can help. To ensure you have power at all times, even during power outages, we can install a home generator and a surge protector to protect the electronics and appliances you depend on.
Call Our Electricians For:
- Electrical repair: Power surges, flickering lights, and blown fuses are some of the most annoying electrical issues. We can fix all of these problems. Our electricians also specialize in repairing broken outlets, fixing overloaded panels, and replacing aging wiring.
- Electrical installation: Allow us to take care of all electrical installations in your home so it stays safe and up to code. Ceiling fans allow for more efficient heating and cooling. EV charging stations make owning an electric car more convenient than ever.
We serve every neighborhood in Minnetonka. Older homes along Minnetonka Boulevard may have outdated electrical panels and wiring. Or maybe you live in one of the newer homes near Williston Road, and you’re stuck with a leaking faucet. Hurlburt is the team to call whenever you need electrical, plumbing, or HVAC work.
No matter how big or little the job is, we always go above and beyond for our customers. Our dedication to improving the quality of life in Minnetonka drives us to consistently provide an exceptional experience. We are a one-stop shop for all your home service needs, from our family to yours.
Call Hurlburt for the best plumbing, electrical, and HVAC company in Minnetonka!
Hurlburt Heating & Plumbing has completed 20 jobs in Minnetonka, MN between October 2025 and January 2026.
The most recent job was on January 11, 2026.
Responded to no heat call for 9-year-old furnace. Diagnostic inspection revealed significant buildup in secondary heat exchanger and collector box, along with worn motors and ignition components. Performed thorough system evaluation including video inspection of internal components. Based on multiple component failures and system age, recommended either complete system replacement or major component overhaul to restore proper heating functionality.
Successfully replaced customer-supplied kitchen faucet with proper installation of drain and water supply lines. Verified connections at P-trap assembly and ensured no leaks upon completion and testing.
Responded to service call for an NTI combi boiler providing lukewarm domestic hot water despite adequate space heating functionality. Diagnosed issue with domestic water side of unit, performed full flush of holding tank to remove potential mineral buildup or sediment. After refilling and allowing proper heating cycle, system now producing appropriate hot water temperatures for all household fixtures.
Responded to warranty call for malfunctioning furnace. Diagnosed faulty RDS board and confirmed need for 27A02 NON-Comm board replacement. After installation, verified system operation with control board showing proper functionality as evidenced by illuminated green indicator light. Furnace is now fully operational.
Successfully replaced a leaking 75-gallon natural gas power vent water heater due to tank failure. Installation included proper connection of copper lines, venting system, and all required valves. Bradford White unit was installed and tested to ensure proper operation.
Responded to heating issue where furnace was not maintaining temperature or auto-activating at set point (69°). Diagnosed system with dirty filter restricting airflow. Replaced air filter to restore proper system function and air circulation.
Replaced failed PSC draft combustion inducer blower assembly on customer's furnace. Completed installation of new inducer motor assembly and verified proper operation. Post-repair combustion analysis with Testo 310 confirmed optimal performance with 97.2% efficiency, CO2 at 8 ppm, and CO at 5 ppm.
Responded to no-heat call for furnace of indeterminate age. Diagnosed dirty flame sensor causing system failure. Cleaned flame sensor and replaced air filter, restoring proper heating function.
Performed diagnostic inspection on furnace system after reports of temperature inconsistency and airflow issues in multiple rooms. Conducted visual inspection of ductwork using camera equipment, confirming no blockages present. Tested all damper motors and discovered air leakage occurring even when dampers were closed. Identified significant heat loss from multiple sliding doors (8 upstairs, 4 downstairs) contributing to temperature regulation problems. Closed unused vents to improve airflow distribution and recommended installation of zone panel system for better temperature control, particularly for basement-only operation as requested by homeowner.
Performed diagnostic inspection on non-operational Trane furnace (2005). Identified two critical issues: gas valve was stuck closed/faulty and confirmed heat exchanger has developed a crack (visible corrosion along seam). Informed homeowner that unit requires either complete furnace replacement or heat exchanger replacement to restore proper operation and ensure safety.
Responded to no-heat service call for 20-year-old zoning system with heating issues in multiple zones. Diagnosed faulty zone control components and aging thermostats. Replaced one defective thermostat to restore proper zone temperature control. System operational upon completion.
Replaced leaking water shut-off valve in the basement utility area that services the water treatment system. Installed new shut-off valve to properly control water flow to the filtration equipment. System now functioning properly with no leaks observed.
Replaced non-operational main shut-off valve after water was shut off to the house. Installed new brass valve assembly with proper connections within the insulated wall cavity, ensuring system integrity. Verified functionality of the replacement valve before completing the job.
Responded to no-heat call for an aging system (10+ years). Diagnosed failed blower motor with seized bearings. Temporarily left site to obtain replacement motor and returned to complete installation. System now functioning properly with restored heating capability.
Responded to no heat call for natural gas system of indeterminate age. Diagnostic testing revealed low pressure sensor error on White Rogers control board. Identified failed motor bearing as root cause. Ordered replacement motor with installation scheduled for next day.
Completed boiler repair on 4-year-old NTI system by replacing internal pump, DHW relief valve, and auto vent air separator. After installation, refilled system, verified proper operation, and re-enabled domestic hot water function. System now functioning correctly.
Performed preventative maintenance on dual furnace system. Conducted tune-up on both units - Goodman furnace showing delayed spark igniter function with 60-second spark delay, and Ruud furnace exhibiting initial startup issues. Resolved immediate concerns by cleaning flame sensors on both units, which restored proper ignition on the Ruud. Recommended replacement of faulty spark igniter on the Goodman furnace to prevent future heating interruptions.
Performed standard furnace tune-up and diagnosed system with minor issues. Observed rust formation on heat exchanger and replaced dirty air filter. Customer advised to monitor system condition and ensure functioning CO detectors are in place due to potential heat exchanger deterioration.
Performed comprehensive furnace maintenance and repair on GMP180-4 model. Diagnosed faulty hot surface igniter (HSI) and control board. Due to unit's age and condition, recommended and replaced entire system rather than individual components. Conducted tune-up service on new installation to ensure optimal performance.
Diagnosed no heat issue on 18-year-old Lennox furnace. Found recently installed thermostat had failed, confirmed by successful operation when jumper wires were applied. Replaced thermostat but discovered failed flame sensor that could not be restored through cleaning. Identified grinding noise from draft motor indicating imminent failure. System unable to maintain operation for complete diagnostics. Recommended replacement options for aging furnace.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.