We’ve assisted homeowners for over 65 years and will proudly service your home as well.

Minnetonka is famous for its cold winters. The Afton Alps and Buck Hill are a blast to ski, and the icy waters of Lake Minnetonka are prime for ice fishing. But to really enjoy those cold-weather activities, you need a cozy place to come home to. Our team can expertly repair, maintain, and install heating systems while helping keep your heating bills down all winter long.
Depend On Us for These Heating and Furnace Solutions:
- Heating repair: A malfunctioning heat exchanger or blower motor causes the heater to use more energy and wear out internal components. From gas valve issues to malfunctioning burner assemblies, we can fix them all.
- Heating installation: We do installations for gas and electric heaters as well as energy-efficient heat pumps to lower your heating costs.
- Heating maintenance: Get your furnace serviced once a year when you sign up for the Hurlburt Family Rewards Program. You’ll save on repairs and accessories and get considerable discounts when it’s time for a heating replacement.
The efficiency of your air conditioning system impacts your ability to relax at home when the weather heats up. We fix issues like refrigerant leaks and blocked air filters so that your home stays cool in the summer. Our installation services help you achieve first-rate air conditioning year-round. When you’re done enjoying water sports at the lake or Minnetonka Mills Park, you don’t have to sweat at home.
We Offer Professional Cooling Services:
- Cooling repair: Stop struggling with weak airflow and inconsistent cooling. Our technicians repair blower motors, frozen evaporator coils, clogged condensate drains, and more.
- Cooling installation: Our installation support is key to selecting the best cooling system for your home. You’ll enjoy cheaper cooling costs and better air quality. We can help you decide if it might make sense to go ductless, too.
- Cooling maintenance: Take advantage of the Hurlburt Family Rewards Program to make your air conditioner last longer and consume less energy. We’ll help you avoid expensive repairs with our yearly tune-up.
See all of our HVAC services in Minnetonka.
Water seepage and pipe corrosion can weaken your home’s framework, causing problems with its foundation. Mold can grow in damp environments caused by leaks. Water bills will skyrocket from even small faucet drips. A plumber from Hurlburt knows how to find and fix these problems. Our hard water in Minnetonka takes a toll on pipes and appliances, so you may want to try our water treatment options as well.
See all of our plumbing services in Minnetonka.
Your electrical system is too important to leave to a company that doesn’t truly care about your safety and comfort. Whether you have a safety hazard or just want complete control over your home illumination with smart lights, we can help. To ensure you have power at all times, even during power outages, we can install a home generator and a surge protector to protect the electronics and appliances you depend on.
Call Our Electricians For:
- Electrical repair: Power surges, flickering lights, and blown fuses are some of the most annoying electrical issues. We can fix all of these problems. Our electricians also specialize in repairing broken outlets, fixing overloaded panels, and replacing aging wiring.
- Electrical installation: Allow us to take care of all electrical installations in your home so it stays safe and up to code. Ceiling fans allow for more efficient heating and cooling. EV charging stations make owning an electric car more convenient than ever.
We serve every neighborhood in Minnetonka. Older homes along Minnetonka Boulevard may have outdated electrical panels and wiring. Or maybe you live in one of the newer homes near Williston Road, and you’re stuck with a leaking faucet. Hurlburt is the team to call whenever you need electrical, plumbing, or HVAC work.
No matter how big or little the job is, we always go above and beyond for our customers. Our dedication to improving the quality of life in Minnetonka drives us to consistently provide an exceptional experience. We are a one-stop shop for all your home service needs, from our family to yours.
Call Hurlburt for the best plumbing, electrical, and HVAC company in Minnetonka!
Hurlburt Heating & Plumbing has completed 20 jobs in Minnetonka, MN between September 2026 and October 2026.
The most recent job was on October 14, 2026.
Hurlburt Heating & Plumbing has completed 129 jobs in Minnetonka, MN in the last 12 months. The first job there was in October 2025.
Performed a tune-up and safety inspection on two 30+ year old gas furnaces, verifying ignition, flame safety, gas valve operation, combustion analysis, and temperature rise on both units, all within specification. Borescope inspection of the main floor unit revealed heavily rusted burners and significant heat exchanger corrosion with no visible openings, while the upper floor unit's burners and heat exchanger were in better condition. Reviewed system options with the homeowner and scheduled a service advisor for follow-up.
Diagnosed a water leak at the water softener's inlet/outlet manifold and installed a bypass connection to isolate the unit and stop the leak. Repaired the affected connections, restored water flow to the system, and verified that all fittings were secure and dry.
Responded to a no-heat complaint on a furnace over 10 years old and found the W1 heat-call wire loose at the control board terminal, preventing the heat demand signal and causing the unit to blow cold air. Re-stripped and re-secured all low-voltage control wires at the board terminals, and verified proper terminal connections. Likely cause was continuous vibration from the thermostat being left in "fan on" mode, which loosened the connections over time.
Returned to install diamond cover on intake venting following recent installation where leaves were being drawn into the system. Upon arrival, determined the cover provided was not the correct size for the 3.5" PVC intake pipe. Measured the existing pipe assembly and documented specifications to order properly sized diamond cover, requiring rescheduling to complete the installation once correct part arrives.
Responded to service call for water shut-off valve inspection prior to city water meter replacement. Upon initial assessment, determined existing shut-off valve required replacement due to age and condition. Returned to property to install new brass shut-off valve on main water supply line. Completed installation with proper threading and sealing, ensuring leak-free operation. Noted evidence of previous copper corrosion and mineral deposits on basement floor beneath plumbing assembly, indicating historical moisture exposure. Verified proper valve function and confirmed system integrity following installation.
Performed on-site assessment of gas range installation that was rejected by appliance installer due to code compliance issues. Evaluated existing gas line configuration and determined that installation of a shut-off valve and drip-leg (sediment trap) is required to meet current code standards for gas appliance connection. Documented existing copper and black iron pipe configuration with photographs for office review and estimate preparation.
Responded to a bathroom sink leak caused by a failed slip joint nut and washer on the drain trap assembly. Removed the deteriorated components and installed new slip joint nut and washer to restore proper seal and eliminate the leak. Verified system integrity and confirmed no further water discharge from the trap connection.
Completed annual heating maintenance visit on Lennox furnace system. Performed comprehensive inspection of unit, verified operational status of all components, and replaced air filter. System tested and confirmed to be functioning properly with all safety controls operational.
Responded to no heat call on unit less than one year old displaying pressure switch error code. Upon inspection, discovered fresh air intake located directly above burners completely obstructed with leaves and debris. Removed all blockage from intake piping, cleared surrounding area of accumulated organic material on deck surface. Cycled system through complete operational test, confirmed proper airflow, verified pressure switch functionality, and validated normal heating operation with no error codes.
Completed comprehensive preventative maintenance tune-up on both air conditioning and furnace systems. During inspection, discovered critical heat exchanger failure with visible cracks and evidence of rodent intrusion in the outdoor AC unit causing component damage. Due to the age of the equipment and severity of the damage, recommended full system replacement for safety and efficiency.
Completed annual heating maintenance visit on a 7-year-old furnace system under maintenance agreement. Performed comprehensive inspection including thermostat verification, air filter assessment, drain line check, and electrical component evaluation of blower motor, inducer motor, capacitor, and wiring connections. Verified proper temperature split across system and conducted detailed safety inspection of heat exchanger, igniter, flame sensor, and gas pressure readings. All components found to be operating within normal parameters with no deficiencies noted. System is functioning properly at time of service completion.
Completed annual preventative maintenance heating visit on two gas furnaces, one located in the garage and one in the home. Performed comprehensive tune-up procedures including inspection of one humidifier, gas heater, and gas fireplace. Replaced air filters and inspected flexible ductwork in attic space, noting normal condensation patterns on metallic surfaces. All equipment operating within normal parameters with no issues identified during inspection.
Installed customer-supplied Toto bidet washlet seat on existing toilet fixture. Connected water supply line to washlet unit and verified all connections were secure with no leaks detected after multiple flush cycles. Unable to perform full operational testing of electronic bidet functions due to lack of electrical power supply at time of installation. Washlet seat is properly mounted and plumbed, ready for use once electrical connection is established by customer. One-year parts and labor warranty provided for installation work performed; no warranty coverage applies to customer-supplied washlet unit itself.
Performed comprehensive furnace tune-up and maintenance inspection. Verified electrical connections at circuit breaker panel, tested capacitor reading at 10.9 mFD using digital meter, and inspected all HVAC wiring and components. All systems operating within normal parameters with no deficiencies noted.
Completed comprehensive maintenance on 5-year-old Daikin furnace system. Performed full system inspection verifying ignition and flame safety operation, burner condition, heat exchanger integrity, gas valve function, and electrical amp draws—all within normal parameters. Blower wheel found clean with proper operation. Replaced air filter and performed humidifier maintenance including cleaning pad housing and installing new humidifier pad. Conducted combustion analysis confirming proper efficiency and verified temperature rise within manufacturer specifications. All system components operating correctly with no deficiencies noted.
Completed routine HVAC maintenance on a 2-year-old furnace system. Identified and addressed dirty air filter and flame sensor during inspection. Replaced air filter and thoroughly cleaned flame sensor to restore optimal system performance. System tested and verified to be operating properly upon completion.
Completed preventive maintenance on high efficiency boiler with in-floor heating system and air exchanger unit. Cleaned and scrubbed flame sensor, verified system pressure at 16 PSI within acceptable range, and tested both heating zones for proper operation with satisfactory warm-up. Conducted carbon monoxide safety test measuring 14 PPM, confirming safe operational levels. Inspected air exchanger filter and found in good condition. Cleaned exterior ventilation to ensure proper airflow to air exchanger. All systems tested and verified ready for winter operation.
Completed comprehensive annual maintenance agreement covering both heating and cooling systems. Performed spring tune-up on one air conditioning unit and one air exchanger, along with fall tune-up on one furnace, one in-floor radiant heating system, and one GFP unit. During inspection, diagnosed failing ECM condenser fan motor on the air conditioning unit and successfully replaced the defective motor to restore proper system operation. All ductwork and system components were inspected and photographed, showing flexible metallic ductwork with typical wear patterns and insulation in satisfactory condition. Systems tested and confirmed operational upon completion.
Completed pre-paid maintenance visit at commercial property for recurring plumbing inspection service. Performed comprehensive inspection and descaling of 8-year-old tankless water heater unit. Flushed system according to manufacturer specifications to remove mineral buildup and ensure optimal performance. Inspected mechanical room plumbing infrastructure including water softener system, supply lines, and associated valving. Inspected toilet tank components and noted mineral deposits consistent with hard water conditions. All systems operational upon completion. Customer requested advance notification upon arrival, which was provided.
Completed annual cooling and heating maintenance visit on one AC unit and one furnace. Performed comprehensive tune-up on both systems, replaced dirty air filter, and documented equipment condition with photos of ductwork and surrounding mechanical systems.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.