Since 1959 Hurlburt, we’ve made it our mission to keep your home safe, comfortable and protected.

From freezing pipes in winter to heavy usage throughout the year, your plumbing system in Minneapolis faces unique challenges. Hurlburt provides reliable plumbing services to keep water flowing safely and efficiently throughout your home.
As a trusted plumber in Minneapolis, Hurlburt offers dependable solutions for everything from routine maintenance to complex repairs. Our team handles drain cleaning, pipe repairs, water heater services, and more, all with a commitment to prompt, high-quality service.
Plumbing issues can escalate quickly, especially in colder climates. Our team responds promptly to diagnose and fix problems before they cause serious damage, helping you avoid costly repairs and disruptions.
Modern homes depend on safe, reliable electrical systems. Hurlburt’s licensed electricians in Minneapolis provide a full range of services, from upgrades to repairs, ensuring your home remains powered safely and efficiently.
Our electricians bring the same level of expertise and customer care to every job, ensuring the safety and efficiency of your electrical system. From panel upgrades to lighting installations, we handle every project with attention to detail and a strong focus on safety.
Electrical work should always be handled by professionals. Our team focuses on safety, performance, and long-term reliability with every project, helping homeowners avoid hazards and maintain consistent power throughout their homes.
While winters are known for their intensity, Minneapolis summers can bring heat and humidity that make indoor comfort just as important. Hurlburt offers expert air conditioning services to keep your home cool, efficient, and comfortable all season long.
From quick repairs to full furnace and AC system upgrades, our technicians are ready to handle any cooling challenge. We service both central air and ductless systems with precision and care.
Winters in Minneapolis are not just cold, they are relentless. Hurlburt provides complete heating services including repairs, maintenance, installations, and system replacements to ensure your home stays warm when it matters most. We work on furnaces, boilers, and ductless heating systems, so no matter what setup you have, we can help.
When your heat stops working during a Minnesota winter, it becomes an urgent issue. Our team offers fast, reliable service, including emergency heating repairs, to restore comfort quickly.
For top-quality furnace repair, AC repair, indoor air quality, plumbing, or electrical services in Minneapolis, reach out to Hurlburt and schedule your service today.
Hurlburt Heating & Plumbing has completed 20 jobs in Minneapolis, MN in September 2026.
The most recent job was on September 23, 2026.
Hurlburt Heating & Plumbing has completed 1,695 jobs in Minneapolis, MN in the last 12 months. The first job there was in October 2024.
Responded to reports of excessive water usage and multiple fixture leaks throughout the facility. Diagnosed and repaired continuously running toilet in downstairs bathroom by replacing handle and flapper assembly. Pulled and reset men's restroom toilet with new wax ring seal to address leaking at base. Performed temporary repair on women's restroom lavatory faucet by replacing flat washers on pitted seats to stop slow drip until permanent fixture replacement can be scheduled.
Responded to service call for leaking tubular piping and basket strainers under double-basin kitchen sink. Upon inspection, determined that existing under-sink drainage assembly had failed and required complete replacement. Removed deteriorated tubular piping, P-traps, and both basket strainers from the double-basin stainless steel sink installation. Installed two new basket strainers with proper sealing, connected new PVC tubular piping including end waste assembly and trap configuration suitable for dual-basin setup. Verified all connections were secure and properly aligned. Conducted operational testing by filling both sink basins and releasing water to confirm proper drainage flow and verify leak-free performance of all newly installed components. System functioning as designed with no leaks detected.
Performed city-required safety inspection and certification on 23-year-old Vaillant boiler system. Conducted comprehensive evaluation including verification of all piping connections for water leaks, system pressure levels, backflow preventer operation, pressure relief valve functionality, and gas valve condition. Cleaned burners, inspected heat exchanger noting minor scaling but confirmed proper operation, verified circulator pump function, and examined heat exchanger seals for integrity with no carbon monoxide leakage detected into living space. Completed full combustion analysis confirming optimal performance parameters. All components operating within manufacturer specifications with no deficiencies identified or repairs recommended at this time.
Performed comprehensive fall maintenance tune-up on 1-year-old Lennox furnace system. Cleaned flame sensor, inspected air filter, and conducted thorough examination of heat exchanger, blower motor, inducer motor, and capacitor—all components operating within normal parameters. Performed carbon monoxide safety testing with readings in acceptable range. System inspected and verified ready for heating season operation.
Performed comprehensive fall tune-up on both furnace and boiler systems. Inspected furnace components including flame sensor, ignition system, blower wheel, air filtration, inducer motor, gas valve, and heat exchanger—all found in acceptable condition. Cleaned flame sensor and performed combustion analysis, confirming furnace operating at 83.2% efficiency with safe carbon monoxide levels. Checked and cleared condensation drain trap, removing accumulated buildup. Conducted boiler inspection and combustion testing, confirming 87.9% efficiency with safe carbon monoxide readings. Noted boiler gas valve is severely seized and could not be opened for pressure testing. Recommend future replacement of gas valve to allow proper pressure adjustments and maintenance access. Both heating systems are currently functioning properly with no immediate safety concerns. Advised homeowner to maintain regular filter replacement schedule.
Completed comprehensive tune-up maintenance on 10-year-old Daikin furnace system. Removed and scrubbed flame sensor to ensure proper ignition detection and system safety. Flushed condensation drain line to prevent blockages and water damage. Performed full system diagnostics including inspection and testing of blower motor, inducer motor, and capacitor—all components operating within normal parameters. Conducted carbon monoxide level testing with results confirming safe operation. Identified air filter requiring replacement and advised customer accordingly. All electrical connections verified secure, and system confirmed to be functioning properly at time of service. Recommend scheduling follow-up maintenance inspection next heating season to ensure continued optimal performance.
Responded to follow-up visit for boiler system installed in December. Customer reported previous return visits for pressure gauge reading incorrectly. Building inspector required gauge orientation changed from vertical to horizontal mounting to meet code requirements. Removed existing pressure gauge and connecting line from boiler system. Installed new pressure gauge in horizontal orientation per manufacturer specifications and inspector requirements. Verified all other system components including circulator pump, piping connections, brass fittings, and electrical connections remained operational and properly configured. Tested gauge for accurate pressure readings and confirmed proper system operation. Documented installation with photographs showing corrected gauge orientation and complete piping assembly.
Completed annual fall heating maintenance on a 4-year-old wall-mounted boiler system. Performed comprehensive tune-up including inspection and cleaning of ignition sensor, inducer motor, air flow system, pressure switch, and gas valve. Conducted combustion analysis confirming system operating at 97.8% efficiency with safe carbon monoxide levels. Verified proper gas pressure and scoped heat exchanger with no defects found. Cleared condensate drain trap and removed buildup to ensure proper drainage. Inspected all copper piping connections, expansion tank, brass valves, and electrical components. System tested and confirmed operating properly with no safety concerns identified.
Responded to inspection correction notice for water heater vent connector that was back-pitched and failed to meet code requirements. Cut and repositioned the vertical vent pipe on the water heater to achieve proper 1/4" per foot pitch as required by building code. Verified correct pitch using level and documented the corrected installation with photographs for submission to the building inspector.
Completed comprehensive furnace tune-up on a 4-year-old Lennox heating system in preparation for winter operation. Performed thorough inspection and maintenance including scrubbing the flame sensor, inspecting heat exchanger for cracks or deterioration, checking blower motor and inducer motor operation, examining all electrical wiring connections, and verifying air filter condition. Flushed condensation drain line to ensure proper drainage and prevent blockages. Conducted carbon monoxide testing with readings within safe parameters. All system components found to be in good working condition with no deficiencies noted. Unit is operating efficiently and ready for the heating season.
Responded to plumbing concerns involving minor water leaks and fixture issues. Completed pipe repair work on copper plumbing system in utility area. Performed toilet pull and reset procedures on both toilets in the residence, including re-caulking and tightening to ensure proper seals and prevent future leaks. Addressed leak behind wash basin and secured all affected fixtures to manufacturer specifications.
Completed installation of new laundry utility sink with brass top-mount faucet and washer stops in mechanical room. Installed three 3/4" ball valves on copper supply lines to provide shutoff capability for the plumbing system. All fixtures and valves were properly secured and tested for proper operation and leak-free connections.
Performed comprehensive pre-season tune-up and inspection on residential boiler system, over 15 years old, that had not been operated since property changed ownership earlier this year. Conducted thorough visual inspection of boiler unit, circulator pumps, expansion tank, and associated copper piping network. Verified proper operation of all zone valves and shut-off valves throughout the hydronic heating system. Inspected all pipe connections, fittings, and joints for signs of corrosion or leakage. Tested circulator pump operation and verified electrical connections to control boxes and safety devices. Examined expansion tank mounting and condition. Cleaned and inspected burner assembly, heat exchanger, and combustion chamber. Verified proper venting and flue pipe integrity. Tested all safety controls including pressure relief valve, low water cutoff, and aquastat settings. System started successfully with no issues noted during operational testing.
Completed annual heating and cooling maintenance visit on 10-year-old HVAC system including boiler and air conditioning unit inspections. Performed comprehensive tune-up procedures on furnace, AC unit, boiler, and gas-fired pool heater. During operational testing, discovered cracked housing on hard start kit capacitor assembly. Removed failed hard start kit and installed new replacement unit to restore proper compressor starting functionality. Verified all systems operational upon completion.
Conducted comprehensive plumbing inspection for new homeowner to assess overall system functionality with emphasis on faucet fixtures throughout the property. Evaluated bathroom plumbing including toilet, pedestal sink, and bathtub fixtures for proper operation and potential issues. Inspected utility sink installation in basement area, examining chrome faucet assembly with hot and cold handles for leaks, water pressure, and proper mounting. Provided detailed estimates for identified repairs and recommended maintenance items to ensure all plumbing fixtures meet operational standards.
Completed warranty repair by replacing furnace control board with updated A2L-compatible connections. Removed existing control board and installed new board with proper A2L refrigerant compatibility. Verified system operation in both heating and cooling modes, confirming all connections secure and functionality restored. System is operating normally with no issues detected at time of completion.
Responded to a backed-up kitchen sink drain that was not draining properly. Diagnosed blockage located beyond the P-trap in the secondary drain line leading to the main. Initially attempted to clear the obstruction using a flex shaft machine but was unable to penetrate the pipe configuration. Successfully deployed a drill snake and cleared the blockage, advancing approximately 20 feet into the drain line before encountering binding resistance that prevented further progress. Attempted camera inspection to assess pipe condition but could not navigate the camera through the vertical section of the drain line. Advised customer that kitchen drain line replacement may be necessary if drainage issues recur. Reassembled all drain components and conducted multiple fill-and-drain tests using the double-basin sink to verify proper flow and check for leaks. All testing confirmed restored drainage function with no leaks detected upon completion.
Responded to a toilet that would not flush and was continuously running. Upon inspection, identified a faulty gasket as the source of the problem. Replaced the defective gasket, restoring proper flush function and eliminating the running water issue.
Responded to water leak emergency as a return visit following initial assessment by restoration company. Located multiple punctures in the plumbing stack that were causing active water intrusion into the structure. Upon inspection, discovered significant rodent damage to wooden framing and door trim adjacent to the plumbing penetration, with characteristic gnaw marks visible along exposed edges. Repaired all punctures in the vertical waste stack using appropriate patching methods to restore water-tight integrity. Tested the repaired line for leaks and verified proper function. Documented existing structural damage from rodent activity for property owner's awareness, including compromised wood studs and trim surrounding the plumbing chase. The plumbing system has been fully restored to proper working condition.
Responded to service call regarding outdoor natural gas line inspection. Traced gas distribution system from meter through residence, identifying four branch lines serving boiler, water heater, fireplace, and oven. Inspected exterior gas manifold on deck where three lines converge, serving garage heater, grill, and former deck fireplace location. Supply line routing beneath deck could not be visually confirmed due to inaccessibility. Attempted to trace suspect line from meter location but unable to locate corresponding tee connection at oven appliance. Documented piping configuration with photos showing copper gas lines, fittings, and manifold assembly beneath deck structure. Advised homeowner that unidentified line appears to be abandoned/dead based on inspection findings. Recommended contacting previous owner for gas line installation history before proceeding with any modifications or additional investigation.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.