Since 1959 Hurlburt, we’ve made it our mission to keep your home safe, comfortable and protected.

From freezing pipes in winter to heavy usage throughout the year, your plumbing system in Minneapolis faces unique challenges. Hurlburt provides reliable plumbing services to keep water flowing safely and efficiently throughout your home.
As a trusted plumber in Minneapolis, Hurlburt offers dependable solutions for everything from routine maintenance to complex repairs. Our team handles drain cleaning, pipe repairs, water heater services, and more, all with a commitment to prompt, high-quality service.
Plumbing issues can escalate quickly, especially in colder climates. Our team responds promptly to diagnose and fix problems before they cause serious damage, helping you avoid costly repairs and disruptions.
Modern homes depend on safe, reliable electrical systems. Hurlburt’s licensed electricians in Minneapolis provide a full range of services, from upgrades to repairs, ensuring your home remains powered safely and efficiently.
Our electricians bring the same level of expertise and customer care to every job, ensuring the safety and efficiency of your electrical system. From panel upgrades to lighting installations, we handle every project with attention to detail and a strong focus on safety.
Electrical work should always be handled by professionals. Our team focuses on safety, performance, and long-term reliability with every project, helping homeowners avoid hazards and maintain consistent power throughout their homes.
While winters are known for their intensity, Minneapolis summers can bring heat and humidity that make indoor comfort just as important. Hurlburt offers expert air conditioning services to keep your home cool, efficient, and comfortable all season long.
From quick repairs to full furnace and AC system upgrades, our technicians are ready to handle any cooling challenge. We service both central air and ductless systems with precision and care.
Winters in Minneapolis are not just cold, they are relentless. Hurlburt provides complete heating services including repairs, maintenance, installations, and system replacements to ensure your home stays warm when it matters most. We work on furnaces, boilers, and ductless heating systems, so no matter what setup you have, we can help.
When your heat stops working during a Minnesota winter, it becomes an urgent issue. Our team offers fast, reliable service, including emergency heating repairs, to restore comfort quickly.
For top-quality furnace repair, AC repair, indoor air quality, plumbing, or electrical services in Minneapolis, reach out to Hurlburt and schedule your service today.
Hurlburt Heating & Plumbing has completed 20 jobs in Minneapolis, MN in September 2026.
The most recent job was on September 28, 2026.
Hurlburt Heating & Plumbing has completed 1,695 jobs in Minneapolis, MN in the last 12 months. The first job there was in October 2024.
Responded to no-heat call on 3-year-old boiler system with radiator heat distribution. Upon inspection, found control board sustained water damage from overhead leak, resulting in complete loss of power to unit and non-functional display screen. This marked the second occurrence of water-related damage to the electrical components. Documented system condition showing internal mechanical compartment with expansion tank, circulator pump, copper piping, and compromised control board requiring replacement to restore heating operation.
Performed warranty compressor replacement on Mitsubishi Electric mini-split system. Removed failed compressor from outdoor condenser unit, installed new compressor, and reconnected all refrigerant lines and electrical connections. Evacuated system to proper vacuum specifications, then recharged unit with 6 pounds of R-410A refrigerant per manufacturer specifications. Cycled system through complete heating and cooling operations to verify proper function of both indoor ceiling-mounted air handler and outdoor condenser unit. All components operating within normal parameters upon completion.
Responded to gas leak emergency in basement following utility company detection of multiple leak points. Confirmed six separate gas leaks in basement gas lines that were not detectable by odor. Documented leak locations with photographs showing compromised piping infrastructure, including multiple brass fittings, valves, and connection points in aged plumbing system. Coordinated scheduling with licensed plumber for comprehensive gas line repairs to address all identified leak points and restore safe operation of gas system.
Responded to gas leak emergency previously identified and tagged by utility company on exterior gas main line. Documented hazardous condition with warning tags visible on weathered, corroded gas piping at meter location. No interior gas odor detected during inspection, confirming leak isolated to exterior system. Coordinated scheduling with licensed plumber for repair work to address utility-marked leak location.
Responded to service call for malfunctioning water shut-off valve and broken vanity faucet. Upon inspection, identified clogged vanity faucet and compromised shut-off valve within wall cavity. Assessed existing plumbing infrastructure including copper supply lines, flexible supply hoses, and drain assembly, noting water staining on wooden support structures indicating previous moisture exposure. Documented conditions of wall-mounted plumbing components, insulation, and under-sink connections. Provided bid for complete vanity repipe to address underlying plumbing deficiencies and prevent future failures.
Responded to a residential plumbing call for a leaking toilet supply line. Upon inspection, discovered the existing supply line was missing a critical gasket, causing water leakage at the connection point. Removed the defective shut-off valve and old supply line. Installed a new shut-off valve with proper sealing and replaced the toilet supply line with a new braided stainless steel flex line, ensuring all connections were properly gasketed and tightened to manufacturer specifications. Tested the system for leaks and verified proper water flow to the toilet tank. All connections remained dry under pressure, and the toilet filled and flushed normally upon completion.
Responded to a non-functional downstairs toilet that had been in service since the 1980s. Upon inspection, determined the toilet was inoperable due to a plugged branch line. Coordinated with drain technician to clear the blocked branch line. Successfully removed the old toilet fixture and installed a new replacement unit, restoring full functionality to the bathroom.
Responded to service call for malfunctioning toilet that was not refilling and subsequently became clogged. Upon inspection, identified two separate issues: one toilet with complete blockage and another with failed fill valve in an older tank-in-tank configuration. Successfully cleared the clogged toilet using appropriate drain clearing methods. Due to the age and condition of the tank-in-tank model with the defective fill valve, performed complete toilet replacement with new Gerber Viper unit to ensure reliable long-term operation.
Responded to service call for basement toilet experiencing inconsistent flushing and tank refill issues. Upon inspection, identified that the fill hose had become disconnected from the fill valve assembly, preventing proper water flow to the toilet tank after each flush. Reconnected the fill hose to restore normal operation and verified proper tank refill and flush performance before completing the service.
Responded to service call for malfunctioning Gerber shower valve with sticking temperature control. Upon inspection, determined that previous repair attempt had incorrectly identified the issue and only removed the backplate rather than the complete cartridge assembly. Removed and replaced the full shower cartridge (part #4251 visible on component), which had been causing intermittent temperature control problems and sticking operation. Installation includes one-year workmanship guarantee on completed repair.
Performed comprehensive maintenance on three furnaces at a triplex property. All units are approximately four years old and were found to be in good operating condition. Conducted thorough inspection of each system including thermostats, air filters, drainage systems, blower motors, inducer motors, capacitors, and electrical wiring. Verified temperature split across all units within acceptable parameters. Inspected heat exchangers, igniters, flame sensors, and confirmed gas pressure readings were within manufacturer specifications. All three furnace systems tested and operating normally upon completion of maintenance service.
Completed annual fall boiler inspection and preventive maintenance tune-up on NTI heating system. Performed comprehensive inspection of flame sensor and ignition system, cleaning both components to ensure optimal performance. Inspected water pump, baseboard heating distribution system, condensation pump, and gas valve for proper operation. Conducted combustion analysis and gas pressure testing, achieving 98.1% efficiency rating. Performed scope inspection of heat exchanger with no defects identified. Tested all four heating zones, verifying zone valves are opening and closing properly for each circuit. Confirmed carbon monoxide levels are safe and within acceptable parameters. Checked system water pressure gauges and verified readings are within normal operating range. System is functioning properly with high efficiency heating output and no operational concerns identified at time of service.
Performed preventive maintenance tune-up on natural gas Burnham boiler with hydronic radiant floor heating system. Conducted comprehensive inspection revealing system pressure was low, replenished water to proper operating level and instructed homeowner on maintenance procedure. Inspected all infloor loops, zone valves, circulator pumps, and manifold distribution system—all functioning properly. Evaluated piping, heat exchanger, and burner assembly with satisfactory results. Performed combustion analysis with acceptable readings and confirmed no carbon monoxide leaks detected. Noted backflow preventer is leaking and requires attention. Pressure relief valve tested and operating correctly. All heating zones confirmed operational and delivering heat properly at time of inspection.
Performed city rental certification inspection on furnace unit. Upon thorough examination, discovered cracks in heat exchanger, which poses a safety hazard and requires immediate attention. Due to compromised heat exchanger integrity, recommended and documented need for complete unit replacement to meet city certification requirements and ensure safe operation.
Performed furnace certification inspection for real estate transaction and city compliance. Conducted comprehensive system evaluation with no issues identified. Inspected blower motor assembly, electrical connections, and wiring harness—all components found in proper working condition. Verified Honeywell gas valve operation and examined all associated electrical terminations. Confirmed proper wire connections throughout system including control wiring and power supply circuits. Inspected ductwork and mounting components in attic installation. System passed certification requirements with all safety and operational parameters meeting code standards.
Responded to a callback for water leaking from beneath bathroom tile into floor drain following toilet replacement. Upon arrival, verified active leak concern and removed toilet to inspect installation. Discovered three to four horned wax rings improperly stacked together at the base, with toilet flange positioned below the finished tile floor level—a condition preventing proper seal formation. Removed all existing horned wax rings and prepared flange surface. Formed a new large wax ring to compensate for the recessed flange position and installed it to create an adequate seal between the toilet base and drainage system. Applied additional wax to seal visible joints and potential leak paths around the flange connection. Reinstalled toilet, ensuring proper compression of wax ring and secure mounting to floor. Advised monitoring for any continued leakage and to contact for follow-up service if issue persists.
Responded to service call for moisture appearing through drywall with concern about ductwork leakage. Conducted thorough inspection of ductwork system and attic space, finding no active leaks in the duct system. Identified complete absence of insulation in attic as probable cause of condensation issue. Documented conditions with photos showing ceiling moisture staining, exposed floor joists, and plumbing infrastructure in uninsulated attic space. Advised customer that condensation on uninsulated ducts during cooling operation is likely source of moisture infiltration. Recommended adding proper attic insulation to prevent future condensation issues. Offered option to return during warmer weather for further diagnostic evaluation if moisture concerns persist after insulation improvements are made.
Completed annual fall heating maintenance visit on Amana furnace unit and humidifier per preventative maintenance agreement. Performed comprehensive inspection including combustion analysis, which confirmed proper operation with Oâ‚‚ levels at 8.3% and CO at 45 ppm. Verified all mechanical components, venting system, PVC condensate drainage, electrical connections, and refrigerant lines. Unit found operational with no deficiencies noted.
Completed biannual plumbing maintenance inspection at residential property. Performed hot water heater flush on Energy Star-rated tank unit less than one year old to remove sediment buildup and maintain optimal efficiency. Conducted comprehensive plumbing system inspection including all visible supply lines, drainage systems, fixtures, and connections throughout the property. All copper piping, PVC connections, pressure relief valves, and water supply lines found to be in proper working condition with no active leaks, corrosion, or deficiencies noted. System operating within normal parameters.
Completed annual preventative maintenance heating visit on Carrier furnace and humidifier system. Performed comprehensive tune-up including electrical diagnostics with multimeter, inspected all mechanical components, tested system operation, and verified proper functionality of both units. All equipment operating within normal parameters with no issues found.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.