Since 1959 Hurlburt, we’ve made it our mission to keep your home safe, comfortable and protected.

From freezing pipes in winter to heavy usage throughout the year, your plumbing system in Minneapolis faces unique challenges. Hurlburt provides reliable plumbing services to keep water flowing safely and efficiently throughout your home.
As a trusted plumber in Minneapolis, Hurlburt offers dependable solutions for everything from routine maintenance to complex repairs. Our team handles drain cleaning, pipe repairs, water heater services, and more, all with a commitment to prompt, high-quality service.
Plumbing issues can escalate quickly, especially in colder climates. Our team responds promptly to diagnose and fix problems before they cause serious damage, helping you avoid costly repairs and disruptions.
Modern homes depend on safe, reliable electrical systems. Hurlburt’s licensed electricians in Minneapolis provide a full range of services, from upgrades to repairs, ensuring your home remains powered safely and efficiently.
Our electricians bring the same level of expertise and customer care to every job, ensuring the safety and efficiency of your electrical system. From panel upgrades to lighting installations, we handle every project with attention to detail and a strong focus on safety.
Electrical work should always be handled by professionals. Our team focuses on safety, performance, and long-term reliability with every project, helping homeowners avoid hazards and maintain consistent power throughout their homes.
While winters are known for their intensity, Minneapolis summers can bring heat and humidity that make indoor comfort just as important. Hurlburt offers expert air conditioning services to keep your home cool, efficient, and comfortable all season long.
From quick repairs to full furnace and AC system upgrades, our technicians are ready to handle any cooling challenge. We service both central air and ductless systems with precision and care.
Winters in Minneapolis are not just cold, they are relentless. Hurlburt provides complete heating services including repairs, maintenance, installations, and system replacements to ensure your home stays warm when it matters most. We work on furnaces, boilers, and ductless heating systems, so no matter what setup you have, we can help.
When your heat stops working during a Minnesota winter, it becomes an urgent issue. Our team offers fast, reliable service, including emergency heating repairs, to restore comfort quickly.
For top-quality furnace repair, AC repair, indoor air quality, plumbing, or electrical services in Minneapolis, reach out to Hurlburt and schedule your service today.
Hurlburt Heating & Plumbing has completed 20 jobs in Minneapolis, MN in July 2026.
The most recent job was on July 21, 2026.
Hurlburt Heating & Plumbing has completed 1,700 jobs in Minneapolis, MN in the last 12 months. The first job there was in October 2024.
Completed mandatory 8-12 safety inspection on Ruud tanked water heater for city compliance requirements. Performed comprehensive evaluation of unit including visual assessment of tank condition, venting system, pipe connections, and safety components. Verified proper installation of flue ductwork, checked all plumbing connections at top of unit, and confirmed water heater is adequately supported and properly positioned in basement utility area. Documented findings and completed required TISH inspection form for municipal records.
# HVAC Service Report - No Cooling Issue Responded to a no-cooling complaint on a Carrier air conditioning system over 10 years old at a rental property. Upon arrival, confirmed the unit was running but not producing cool air. Performed diagnostic testing on the system using electrical test equipment to measure operational parameters and identify the root cause of the cooling failure. Removed the front access panel of the indoor air handler to inspect internal components including the evaporator coil, refrigerant lines, and associated mechanical assemblies. Connected diagnostic leads to measure voltage, amperage, and system performance. Inspected copper refrigerant tubing, insulated suction lines, and internal pump/motor components for signs of failure or degradation. Given the advanced age of the Carrier unit and the nature of the cooling failure, evaluated whether repair or replacement would be the most appropriate course of action. Documented the system condition through photogra
Completed heat pump tune-up on mini split system with two indoor heads. Performed operational check on both units, verified proper airflow through ceiling-mounted registers, and inspected electrical connections and wiring at equipment. All components found to be functioning properly with no immediate service needs identified.
Replaced failed single-stage furnace ignition control board on Goodman heating unit. The system was non-operational prior to repair, requiring complete control board replacement to restore heating functionality. New control board was successfully installed and system tested to confirm proper ignition sequence and operation.
Responded to a service call for a Lennox air conditioning system experiencing water leakage while maintaining cooling capacity. Upon inspection, diagnosed a clogged condensate drain line as the primary issue. Utilized wet vacuum to extract accumulated condensation water from the drain pan and line, then cleared the blockage using compressed CO2. Thoroughly inspected evaporator coils and drain pan, confirming no damage or additional leaks present. Performed comprehensive cleaning of both interior and exterior sections of the condensate drain line using vacuum extraction methods. Flushed drain system with 2-3 gallons of water to verify proper flow and confirmed audible drainage through wall cavity, indicating complete line clearance. System tested and verified to be cooling normally with condensate draining properly through cleared line. Unit restored to full operational status.
Responded to a bathroom sink leak complaint where water was draining into the vanity cabinet. Upon diagnostic inspection, discovered the tail piece connecting to the P-trap assembly was completely disconnected, causing all drainage to bypass the trap and leak directly into the cabinet space. Removed the existing trap assembly, properly reconnected and secured the tail piece to the drain outlet, and reinstalled the P-trap ensuring all compression fittings were tightened to manufacturer specifications. Performed operational testing by running water through the fixture at various flow rates to verify proper drainage and confirmed no leaks were present at any connection points. Sink restored to full operational status.
Completed warranty repair on HVAC control system by replacing failed PCB and diagnostic board. Diagnosed control failure, removed defective circuit boards, installed new components, reconnected all wire harnesses to terminal blocks, and verified proper system operation upon completion.
Responded to a callback for a persistent toilet leak reported after previous service visit. Upon arrival, inspected the hot side angle stop on the basement lavatory faucet as indicated by homeowner. Tightened the compression nut on the angle stop to seal the leak. Monitored the valve for ten minutes to confirm no active leaking was present. Left valve in service with no leaks detected at time of departure.
Responded to no cooling complaint on 10-year-old Ducane AC system. Confirmed unit was blowing air but not producing cold air. Diagnosed low refrigerant charge in outdoor condensing unit, provided repair estimates, and scheduled follow-up with advisor to discuss replacement options given age of equipment.
Responded to no cooling complaint on 15-year-old R22 central air conditioning system with indoor temperature reading 82-84°F. Upon inspection, found failed capacitor and loose wire connection at outdoor unit, both of which were repaired to restore operation. Diagnostic testing revealed refrigerant flooding in evaporator coil indicating system inefficiencies consistent with age-related component degradation. Unit restored to operational status with cooling capability, however customer advised of underlying system issues due to age and R22 refrigerant phase-out. Scheduled follow-up appointment to provide replacement system estimate given the advanced age of equipment and declining efficiency.
Responded to no cooling complaint on 4-6 year old residential-sized air conditioning unit. Diagnosed failed contactor preventing compressor operation. Replaced defective contactor and restored system to normal cooling operation.
Completed comprehensive AC maintenance on one Lennox condenser unit utilizing R-410A refrigerant in 93-degree ambient conditions. Performed full system inspection including filter, thermostat, temperature split, condenser, coils, motors, capacitors, compressor, refrigerant levels, and condensate drain. Replaced 14x20x1 air filter from van stock. Diagnosed system short cycling caused by heavily soiled outdoor condenser coil restricting airflow. Thoroughly rinsed down outdoor coil to restore proper heat transfer and system operation. Verified all components functioning correctly with proper cycling restored upon completion.
Responded to no cooling complaint on older York unit. Diagnosed failed capacitor preventing proper system operation. Replaced defective capacitor and restored cooling function to unit.
Performed refrigerant charge adjustment on LG ductless mini-split system to restore optimal performance and efficiency. Weighed out existing R410a refrigerant charge and recharged system to manufacturer specifications using up to 2 pounds of R410a refrigerant. System tested and confirmed operational upon completion, with follow-up visit scheduled for cleaning of mini-split unit.
Responded to no cooling complaint on 10+ year old R-SKYPAK unit. Verified thermostat operation and found filter in acceptable condition. Measured temperature split at supply and return, registering only 10 degrees, indicating insufficient cooling capacity. Inspected evaporator coil with no visible restrictions or contamination. Obtained refrigerant pressure readings revealing suction pressure within normal range but discharge pressure abnormally elevated with low subcooling measurements. Unit safety tripped on high pressure cutout switch during diagnostic testing. Due to unfamiliarity with R-SKYPAK equipment specifications and proper diagnostic procedures for this particular model, contacted dispatch to schedule follow-up visit with senior technician experienced with this unit type to complete proper diagnosis and repair.
Responded to service call for multiple inoperable water supply valves preventing bathroom remodel progress. Upon diagnostic inspection, identified four service stops requiring replacement—three were completely inoperable and one was deteriorated due to age. Removed and replaced all four service stops in the lower level bathroom and main level bathroom. Restored water supply to affected fixtures and performed operational testing on each newly installed service stop to verify proper function and confirm no leaks were present. Additionally, installed two customer-provided toilet flappers to complete the plumbing repairs. All fixtures tested successfully with full water flow control and no seepage detected at connection points.
Completed annual spring cooling tune-up on residential HVAC system including one air conditioning unit and one dehumidifier. Performed comprehensive AC inspection revealing unit operational but drawing higher than normal amperage. Installed hard start kit to reduce compressor startup current and improve electrical efficiency. Inspected Lennox furnace installation, refrigerant lines, and associated electrical components including outdoor capacitor and wiring connections. Verified proper operation of all equipment following service completion.
Responded to service call for condensation leaking from supply vents in upstairs living room and bedroom. Upon arrival, found attic temperature at 124 degrees with high humidity conditions contributing to excessive condensation formation. Inspected attic-mounted air handler unit and accessible ductwork, documenting equipment configuration and visible supply duct runs. Unable to locate supply vents serving the affected living room and bedroom areas due to extreme attic temperatures and limited visibility in confined space. Photographed air handler installation, flexible ductwork connections, and condensate drain line routing, as well as water damage evidence on bedroom carpet from ongoing condensation dripping. Recommended installation of attic exhaust ventilation to reduce ambient temperature and humidity levels. Rescheduled service visit to complete vent location, assess ductwork insulation adequacy, and determine if additional measures are needed to prevent continued condensation iss
Responded to a gas leak emergency at a water heater that had been tagged and shut off by the utility company. Multiple leaks were identified at the union connection and piping section above the union. Removed defective gas fittings and replaced the elbow, union, tee, and associated gas pipes with new components. Performed comprehensive leak checks on all replaced fittings and connections to the water heater, as well as the gas regulator and system fittings. Relit the water heater pilot light, verified proper operation of the range, and confirmed the entire gas system returned to normal operation.
Responded to no cooling callback on 2-3 month old AC system that had shut down with fan error code after outdoor unit became blocked with cottonwood debris. Upon arrival, system was operational as homeowner had already cleaned exterior coil approximately 45-50 minutes prior, clearing the obstruction and restoring normal function. Verified system performance with delta-T reading of 21°F across evaporator coil, confirming adequate cooling capacity. Inspected outdoor coil condition and noted satisfactory cleaning by homeowner. Observed air filter requiring replacement, which homeowner will complete same day. No error codes present at time of inspection and all system functions operating within normal parameters.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.