Since 1959 Hurlburt, we’ve made it our mission to keep your home safe, comfortable and protected.

From freezing pipes in winter to heavy usage throughout the year, your plumbing system in Minneapolis faces unique challenges. Hurlburt provides reliable plumbing services to keep water flowing safely and efficiently throughout your home.
As a trusted plumber in Minneapolis, Hurlburt offers dependable solutions for everything from routine maintenance to complex repairs. Our team handles drain cleaning, pipe repairs, water heater services, and more, all with a commitment to prompt, high-quality service.
Plumbing issues can escalate quickly, especially in colder climates. Our team responds promptly to diagnose and fix problems before they cause serious damage, helping you avoid costly repairs and disruptions.
Modern homes depend on safe, reliable electrical systems. Hurlburt’s licensed electricians in Minneapolis provide a full range of services, from upgrades to repairs, ensuring your home remains powered safely and efficiently.
Our electricians bring the same level of expertise and customer care to every job, ensuring the safety and efficiency of your electrical system. From panel upgrades to lighting installations, we handle every project with attention to detail and a strong focus on safety.
Electrical work should always be handled by professionals. Our team focuses on safety, performance, and long-term reliability with every project, helping homeowners avoid hazards and maintain consistent power throughout their homes.
While winters are known for their intensity, Minneapolis summers can bring heat and humidity that make indoor comfort just as important. Hurlburt offers expert air conditioning services to keep your home cool, efficient, and comfortable all season long.
From quick repairs to full furnace and AC system upgrades, our technicians are ready to handle any cooling challenge. We service both central air and ductless systems with precision and care.
Winters in Minneapolis are not just cold, they are relentless. Hurlburt provides complete heating services including repairs, maintenance, installations, and system replacements to ensure your home stays warm when it matters most. We work on furnaces, boilers, and ductless heating systems, so no matter what setup you have, we can help.
When your heat stops working during a Minnesota winter, it becomes an urgent issue. Our team offers fast, reliable service, including emergency heating repairs, to restore comfort quickly.
For top-quality furnace repair, AC repair, indoor air quality, plumbing, or electrical services in Minneapolis, reach out to Hurlburt and schedule your service today.
Hurlburt Heating & Plumbing has completed 20 jobs in Minneapolis, MN in August 2026.
The most recent job was on August 6, 2026.
Hurlburt Heating & Plumbing has completed 1,695 jobs in Minneapolis, MN in the last 12 months. The first job there was in October 2024.
Returned to address unresolved condensate drain issues from previous service visit. Found drain line not draining properly due to improper pitch and potential blockage. Repipe PVC from drain pan, leveled existing line with proper downward pitch for gravity drainage, and installed plug in auxiliary drain pan. Snaked drain line to clear any obstructions. Performed water flow test through entire drain system and confirmed proper drainage with no backup. Air handler unit level verified and found to be acceptable; drainage issue determined to be line configuration rather than equipment installation. Installed bleeder tee at unit as recommended. System now draining correctly with no standing water in pan.
Responded to a no hot water call and found the hot water valve broken off on a 17-year-old 67-gallon natural gas water heater. Upon inspection, discovered the water heater handle was broken and two valves were actively leaking. Due to the age of the unit and extent of the damage, recommended full water heater replacement. Successfully replaced the 67-gallon natural gas water heater with new unit, including installation of new shut-off valves and proper connections to existing copper supply lines. Tested all connections for leaks, verified proper gas combustion, and confirmed hot water delivery throughout the home. Customer also expressed interest in adding an additional outdoor spigot for future consideration.
Completed annual preventive maintenance cooling visit on residential HVAC system consisting of one standard air conditioning unit and one mini split system. Performed comprehensive tune-up procedures on both units including inspection of electrical connections, refrigerant levels, condensate drainage, and airflow components. Outdoor condenser unit inspected and found operational despite vegetation growth around perimeter. Indoor mini split air handler and associated ductwork examined in mechanical closet with all components functioning properly. Verified both systems operating within manufacturer specifications with no deficiencies noted. All equipment running as designed with no repairs required at this time.
Completed maintenance agreement service including furnace tune-up and fireplace maintenance. Performed comprehensive fireplace inspection checking CO levels, pilot assembly, ceramic logs, embers, wiring connections, gas valve operation, and venting system. All components found operating within normal parameters. System secured and turned off for summer season per standard protocol.
Completed annual cooling maintenance on two 21-year-old air conditioning systems. Main level unit tested within proper specifications with adequate R22 refrigerant levels and all components functioning correctly. Top floor unit found to be low on R22 refrigerant, causing the indoor evaporator coil to freeze and leak water onto the furnace heat exchanger below, with visible water damage observed. Both systems contain obsolete R22 refrigerant. Replaced air filters on both units. Advised that the refrigerant leak and resulting water damage to the heat exchanger could lead to significant furnace damage if left unaddressed. Scheduled same-day estimate for air conditioning system replacement.
Responded to no-cool complaint on 9-10 year old residential central air conditioning system. Upon inspection, diagnosed failed capacitor preventing compressor operation. Replaced defective capacitor with new unit and performed complete system testing. Verified all electrical components, compressor operation, and refrigerant charge levels are within manufacturer specifications. System restored to full cooling operation.
Responded to service call for Navien tankless water heater system experiencing operational issues due to faulty factory transformer. Retrieved correct replacement transformer and returned to site to complete repair. Removed defective transformer from boiler unit and installed new factory-spec replacement component. Following installation, performed comprehensive system testing including cycling all heating zones and verifying domestic hot water functionality. Confirmed all zones responded properly and system returned to normal operation with proper voltage readings and no error codes displayed on control panel.
Completed plumbing repairs addressing multiple drainage and fixture issues throughout the residence. Installed drain covers for one sink and two bathtub drains to restore proper drainage function and prevent debris from entering the waste lines. Repaired leaking shower faucet by replacing worn internal components and seals to eliminate water waste. Connected water supply line to refrigerator freezer unit, ensuring proper water pressure and secure fittings to prevent future leaks.
Completed annual preventative cooling maintenance on single R22 air conditioning system. Performed comprehensive inspection of indoor and outdoor components, including thermostat operation verification and condenser unit assessment. System found to be operating with refrigerant charge slightly below optimal levels. Due to R22 refrigerant phase-out and system age, recommended replacement system for future consideration. Unit currently functioning properly following maintenance service.
Responded to callback for air conditioning system experiencing extended run times and inadequate cooling performance. Performed comprehensive system diagnostics including thermostat verification, air filter inspection, temperature split measurements, outdoor unit examination, evaporator coil assessment, and refrigerant charge verification—all components found within normal operating parameters. Identified suboptimal blower motor speed setting on control board and adjusted fan speed configuration from F04 to F07 to increase airflow and improve cooling efficiency. Advised homeowner to monitor system performance over next several operating cycles and contact for follow-up if cooling issues persist.
Completed annual maintenance on Mitsubishi Electric mini-split system with three indoor heads. All units operational with filters cleaned during visit; however, internal coils on all three heads show significant dirt accumulation requiring deep cleaning. Quote for additional cleaning services sent via email.
Responded to service call for loose toilet seat. Upon inspection, found toilet seat hardware had loosened, causing instability. Tightened existing mounting bolts and hardware to secure seat properly. Submitted parts request form for potential oval-shaped white replacement seat if future replacement becomes necessary.
Installed new widespread bathroom faucet with three-hole configuration on existing white ceramic sink basin. Connected braided stainless steel supply lines to angle stop valves and secured all plumbing connections beneath fixture, ensuring proper water flow and leak-free operation.
Successfully installed three customer-supplied bathroom fixtures including two lavatory faucets and one toilet. The first installation featured a contemporary brushed nickel faucet with angular geometric design mounted to a white countertop with gray marble veining, paired with a rectangular undermount sink. The second installation consisted of a three-piece widespread faucet in brushed finish with separate handle controls and curved spout, installed with an oval undermount lavatory. All fixtures were tested thoroughly for proper operation and leak-free performance by filling and draining each sink multiple times, running continuous water flow for ten minutes, and flushing the toilet ten times. No leaks were detected at any connections. All fixtures left in full working order.
Responded to no cooling complaint on 21-year-old air conditioning unit. Found failed capacitor and extensive mouse nest in electrical compartment with chewed low voltage wiring. Removed all nesting material and debris from cabinet, replaced capacitor, and rewired damaged low voltage connections. Verified refrigerant charge within specification and confirmed all other system components operating properly. Unit restored to full operational status.
Responded to ongoing thermostat communication issues with smart hub requiring repeated breaker resets to restore functionality. Documented existing S40 smart hub installation with photos showing wireless connectivity device mounted to HVAC panel with active LED indicators and external antenna. Submitted parts order for replacement S40 unit due to persistent connection failures affecting system operation.
Completed annual cooling maintenance visit on two systems: one mini-split unit and one high-velocity AC system. Performed standard preventative maintenance procedures on both units, confirmed all components operating within normal parameters, and replaced air filters. No deficiencies or repair needs identified at time of service; customer advised to maintain regular filter cleaning schedule for optimal system performance.
Completed annual cooling preventative maintenance on one air conditioning system utilizing 410A refrigerant under ambient conditions of 86 degrees. Conducted comprehensive inspection of indoor air handler including air filter, condensate drain line, blower motor assembly, electrical wiring, and all associated components with satisfactory findings. Verified proper temperature split across evaporator coil. Performed outdoor unit inspection including condenser coil cleanliness, capacitor condition, and overall unit operation. Measured amperage draw on condenser fan motor, compressor, and contactor with all readings within manufacturer specifications. Verified refrigerant charge levels appropriate for system operation. Recommended replacement of 20x25x4 air filter to maintain optimal airflow and system efficiency. System operating normally upon completion of maintenance protocol.
Responded to no cooling complaint on 10+ year old Fujitsu mini split system. Unit was not powering on and displayed 6 flashes at LED3 indicator. Consulted with technical support to diagnose the fault code and determined two thermistors in head unit C had failed, preventing system operation. Documented findings with photos of the indoor air handler unit and manufacturer label information. Parts department will provide estimate for replacement thermistors, and service call has been rescheduled to complete repairs once components are available.
Completed annual cooling maintenance on single-zone residential AC system with 410A refrigerant at 81°F ambient temperature. Performed comprehensive inspection of Bryant indoor air handler including filter, condensate drain, blower motor, electrical wiring, and components—all found satisfactory. Verified proper temperature split across evaporator coil. Inspected outdoor condenser unit including coil cleanliness, capacitor condition, and measured amp draw on compressor, fan motor, and contactor—all within specifications. Verified refrigerant charge at proper operating levels. Replaced failed dual-run capacitor (45+7.5 MFD) as system component had degraded beyond acceptable parameters. Replaced water panel humidifier pad and water filter per homeowner request to maintain optimal indoor air quality and humidification performance. Addressed homeowner concern regarding blue discoloration observed on copper refrigerant lines, indicating potential oxidation or chemical reaction with insulat
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.