Since 1959 Hurlburt, we’ve made it our mission to keep your home safe, comfortable and protected.

From freezing pipes in winter to heavy usage throughout the year, your plumbing system in Minneapolis faces unique challenges. Hurlburt provides reliable plumbing services to keep water flowing safely and efficiently throughout your home.
As a trusted plumber in Minneapolis, Hurlburt offers dependable solutions for everything from routine maintenance to complex repairs. Our team handles drain cleaning, pipe repairs, water heater services, and more, all with a commitment to prompt, high-quality service.
Plumbing issues can escalate quickly, especially in colder climates. Our team responds promptly to diagnose and fix problems before they cause serious damage, helping you avoid costly repairs and disruptions.
Modern homes depend on safe, reliable electrical systems. Hurlburt’s licensed electricians in Minneapolis provide a full range of services, from upgrades to repairs, ensuring your home remains powered safely and efficiently.
Our electricians bring the same level of expertise and customer care to every job, ensuring the safety and efficiency of your electrical system. From panel upgrades to lighting installations, we handle every project with attention to detail and a strong focus on safety.
Electrical work should always be handled by professionals. Our team focuses on safety, performance, and long-term reliability with every project, helping homeowners avoid hazards and maintain consistent power throughout their homes.
While winters are known for their intensity, Minneapolis summers can bring heat and humidity that make indoor comfort just as important. Hurlburt offers expert air conditioning services to keep your home cool, efficient, and comfortable all season long.
From quick repairs to full furnace and AC system upgrades, our technicians are ready to handle any cooling challenge. We service both central air and ductless systems with precision and care.
Winters in Minneapolis are not just cold, they are relentless. Hurlburt provides complete heating services including repairs, maintenance, installations, and system replacements to ensure your home stays warm when it matters most. We work on furnaces, boilers, and ductless heating systems, so no matter what setup you have, we can help.
When your heat stops working during a Minnesota winter, it becomes an urgent issue. Our team offers fast, reliable service, including emergency heating repairs, to restore comfort quickly.
For top-quality furnace repair, AC repair, indoor air quality, plumbing, or electrical services in Minneapolis, reach out to Hurlburt and schedule your service today.
Hurlburt Heating & Plumbing has completed 20 jobs in Minneapolis, MN in August 2026.
The most recent job was on August 31, 2026.
Hurlburt Heating & Plumbing has completed 1,695 jobs in Minneapolis, MN in the last 12 months. The first job there was in October 2024.
Responded to report of water accumulation in drip pan beneath condenser and air handler located in third-floor attic. Upon inspection, identified broken condensate trap causing improper drainage. Removed defective trap assembly and installed new PVC trap with proper configuration to ensure adequate drainage and maintain proper air seal. Verified system operation and confirmed condensate draining correctly with no leaks.
Completed comprehensive maintenance on a 4-year-old gas furnace system as part of recurring maintenance agreement. Performed full system inspection including thermostat verification, indoor air handler assessment, and examination of filter, drain line, blower motor, inducer motor, capacitor, and all electrical wiring connections. Verified temperature split across system within acceptable parameters. Conducted thorough inspection of heat exchanger, igniter, flame sensor, and confirmed gas pressure at proper levels. All components found operating within normal specifications. Unable to complete carbon monoxide safety testing due to malfunctioning combustion analyzer; follow-up work order filed for secondary technician visit with operational testing equipment to verify CO levels. System currently operating normally with no immediate concerns identified.
Completed annual heating maintenance inspection on 1-year-old furnace and boiler system. Replaced plugged furnace filter with customer-provided filter to restore proper airflow. Inspected boiler venting and exhaust stack for condensation issues following previous installation, noting water drainage concerns on PVC vent piping. Verified furnace exhaust venting is operating properly with no abnormalities detected. Documented equipment condition with photographs of mechanical room showing water heater, HVAC components, PVC venting infrastructure, and refrigerant lines with filter drier.
Coordinated with city water department to replace both deteriorated main shut-off valves serving the property. Removed existing failed valves and installed new brass shut-off valves on the main water supply line entering the structure. Work was completed during the city's scheduled service window to minimize water service interruption. All connections were properly sealed and tested for leaks, with new valves now providing reliable water control for the entire plumbing system.
Performed comprehensive maintenance on 17-year-old gas furnace system per maintenance agreement. Inspected and verified proper operation of thermostat, indoor air handler, filter, drain pan, blower motor, inducer motor, and all electrical wiring. Checked temperature split, heat exchanger condition, igniter, flame sensor, and gas pressure—all within acceptable parameters. Conducted complete safety inspection including carbon monoxide level testing with satisfactory results. Identified aging 15mfd capacitor showing signs of wear and recommended replacement; homeowner declined service at this time and estimate was provided. Due to advanced age of equipment and potential heat exchanger concerns, recommended full system replacement and scheduled comfort advisor consultation for equipment evaluation. System currently operating within normal parameters.
Completed comprehensive furnace tune-up inspection with all components operating within normal parameters. Verified thermostat operation, air filter condition, blower assembly, burner/heat exchanger compartment, inducer operation, ignition system, flame sensor, safety controls, electrical components, condensate drain, and temperature rise. Gas valve assembly and electrical connections inspected and found secure with no mechanical deficiencies or safety issues identified. Recommended regular filter maintenance to maintain optimal system performance.
Completed scheduled maintenance tune-up on residential furnace and air conditioning system as part of recurring heating visit agreement. Performed comprehensive inspection of gas furnace components including blower motor assembly, electrical connections, gas valve, control board, and burner operation. Checked all safety controls and verified proper system functionality. Inspected Honeywell humidifier unit and associated ductwork connections. Noted unit requires specialized AprilAire accordion-style air filter; current filter size documented for future ordering as this particular model may not be in standard stock inventory. Examined condensate pump operation and PVC drainage system for proper function. Verified all electrical wiring connections throughout upper and lower furnace compartments, including multi-colored wire harnesses to motor assembly and control systems. All equipment operating within normal parameters with no immediate service concerns identified. System performing effi
Responded to callback for Lennox thermostat displaying error code 275 FG (flame out of sequence/no flame detected). Upon arrival, verified cooling operation was functioning normally. Tested auxiliary heating mode and confirmed proper operation. Inspected heat pump mode and cooling mode, both operating within normal parameters. Performed system reset which cleared the fault code. Conducted comprehensive testing of all equipment to verify proper operation across all modes with no further error codes present.
Responded to service call for American Standard shower valve dripping in the off position following recent cartridge replacement. Upon diagnostic inspection, removed the newly installed shower valve cartridge and discovered an O-ring had slipped off the back of the cartridge assembly, causing continuous water flow. Properly repositioned and installed the O-ring onto the cartridge, then reinstalled the cartridge into the valve body. Turned on water supply and performed visual inspection of the valve assembly to verify no leaks were present. Reassembled shower valve trim components and conducted operational testing to confirm shower valve was functioning correctly with no water dripping when in the off position. Also noted minor dripping at shut-off valve on the valve body requiring future attention.
Completed toilet pull and reset service to address potential leak concerns. Removed existing toilet from flange, replaced wax ring and closet bolts, then professionally reset and leveled the fixture to manufacturer specifications ensuring proper seal and stability. Work performed as part of previously approved estimate, with unit now securely installed and tested for proper operation.
Plumber successfully removed an old humidifier piercing valve and installed a replacement unit. Additional assessment was conducted on the main water line, with recommendations provided for a complete main line rebuild based on observed conditions.
Performed comprehensive maintenance inspection on 18-year-old Carrier furnace and 7-year-old Lennox air conditioning system. Furnace evaluation revealed satisfactory ignition and flame safety operation, clean filter, functional control board and gas valve, but identified failed heat exchanger with elevated temperature rise, requiring safety shutdown of heating unit. Air conditioning inspection showed operational contactor, weak compressor capacitor, proper refrigerant charge, and acceptable 18-degree temperature drop; performed condenser coil rinse to maintain system efficiency. Reviewed all available options with homeowner and coordinated service advisor appointment to address furnace replacement needs.
Responded to commercial dispatch at daycare facility for clogged toilet in children's restroom. Upon arrival, found toilet bowl obstructed with excessive amount of toilet paper causing complete blockage. Successfully cleared obstruction using manual closet auger, restoring full drainage and flush functionality to the fixture.
Responded to service call for Pentair reverse osmosis system experiencing reduced water flow approximately one month after installation. Verified holding tank pressure at 7 psi, confirming proper specification. Replaced all system filters to restore adequate water pressure and flow rate at dispensing faucet, as customer reported system functioned properly until recent decline in performance.
Completed annual furnace tune-up and maintenance on units E312 and E311, including cleaning the condensate trap, replacing air filter, adjusting blower speed to lower setting, and documenting service in maintenance log. Performed electrical diagnostics and system testing to verify proper operation, with thermostat confirming heating system functionality.
Conducted on-site evaluation of leaking 50-gallon gas water heater showing signs of deterioration at the base. Assessed existing installation proximity to HVAC system and documented current plumbing configuration, electrical panel setup, and utility room layout. Photographed mechanical systems including copper supply lines, shut-off valves, venting, and spatial constraints to provide comprehensive estimate for replacement unit and repositioning to improve clearance from adjacent heating equipment.
Completed comprehensive boiler tune-up and maintenance inspection as part of membership agreement. Performed thorough system evaluation including burner cleaning, heat exchanger inspection, and verification of pump, relay, igniter, and electrical wiring integrity. Checked and confirmed proper gas pressures and combustion air levels, cycled system through full operation, bled all radiators to remove air pockets, and adjusted system water pressure to 18 psi to ensure optimal performance and safe operation.
Responded to callback for persistent water leak into basement following initial service visit. Upon investigation, identified failed crimp connection on dishwasher supply line that was left unhooked. Corrected the faulty crimp connection, properly secured and reconnected dishwasher water supply line, and verified all connections for proper seal. Tested system to confirm leak was resolved and no further water intrusion into basement occurred.
Completed comprehensive plumbing inspection corrections for residential property sale preparation. Installed whole home mixing valve on hot water system with new copper piping on both inlet and outlet of water heater to meet code requirements. Secured laundry sink to floor for proper stability, installed new P-trap for laundry sink drainage system, and caulked base of basement toilet to fixture specifications. All work performed addresses inspection deficiencies and brings plumbing systems into compliance with current standards.
Completed annual heating and cooling maintenance agreement visit including inspection of one furnace, one humidifier, one gas heater, one air conditioning unit, and one mini-split system with one head. Performed comprehensive tune-up on 2-year-old Lennox furnace: verified igniter operation, tested flame sensor functionality, confirmed proper amp draws across all components, conducted combustion analysis with results within manufacturer specifications, inspected heat exchanger with no issues found, and verified temperature rise within acceptable range. Noted dirty air filter requiring replacement. Inspected 6-year-old Carrier air conditioning system: tested contactor and capacitor with readings within normal parameters, verified refrigerant charge at proper levels, inspected evaporator coil finding it clean and free of debris, cleaned condenser coil, and confirmed temperature drop across coil within specifications. All electrical connections secure and operating properly. Provided ho
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.