We’ve assisted homeowners for over 65 years and will proudly service your home as well.
with Purchase of Furnace & AC
Includes Merv 16 5" media cabinent and ApcoX Premium UV-light. Cannot be combined with any other offers. Must present coupon at time of service. Not valid on previously completed work.
Maplewood tends to experience long winters with lots of snowfall. This makes for some great snow skiing at places like Afton Alps or Battle Creek Regional Park. To stay cozy and warm at home, we can install, repair, and maintain your furnace system. We recommend scheduling maintenance once a year to ensure your home has the best heating possible.
Trusted Heating Services to Keep You Comfortable
- Heating Repair: Does your home have cold spots? Your heater might have a failing ignitor or worn-out components. We can help with all of these problems and many more.
- Heating Installation: We will consider many factors to ensure we select the best heater for your house. These factors include insulation levels, square footage, layout, and more.
- Heating Maintenance: Extend the lifespan of your heater with our Hurlburt Family Rewards Program. We’ll fine-tune the unit so that it provides optimal heating all winter.
Maplewood has long winters, but it also experiences warm weather during the summer. A lot of residents take advantage of the warmer temperatures by swimming at Maplewood Community Center or hiking at Phalen Regional Park. For golf lovers, one of the best courses in the community is the Maplewood Golf Course. Enjoying all of these activities is much easier when you can relax and sleep well at home to boost your energy levels. To do this, you’ll need a well-functioning cooling system. Hurlburt is here to make sure your AC operates efficiently and keeps you comfortable all summer long with expert air conditioning services.
Comprehensive Cooling Services Near You
- Cooling Repair: Our AC repairs ensure your home stays cool during hot weather. We replace faulty compressors, fix refrigerant leaks, upgrade outdated thermostats, clean clogged evaporator coils, and much more.
- Cooling Installation: Does your AC keep breaking down? There’s a good chance you might need a replacement. We’ll help you select the most efficient AC for your home and even discuss whether to go ductless.
- Cooling Maintenance: We highly recommend annual AC maintenance via our Hurlburt Family Rewards Program. We will lubricate all moving parts, clean coils, verify thermostat calibration, and much more. You’ll enjoy cheaper cooling costs and a longer-lasting AC.
See all of our HVAC services in Maplewood.
Have you ever taken the time to think about all the different parts of your plumbing system? It has pipes, faucets, a water heater, a sump pump (if it has a basement), drains, and so much more. When any of these parts break or leak, it can wreak havoc on your home, causing expensive damage. It can also translate into mold growth, which is harmful to your health. As the mold spreads, it can even compromise your house’s structural integrity. A professional plumber will know how to fix all plumbing problems to keep your home safe, dry, and well-protected.
See all of our plumbing services in Maplewood.
Electrical systems are complex and dangerous to work on yourself. Our electricians have many years of experience performing electrical work. We can upgrade the outlets in your home, fix tripping circuit breakers, do panel replacements, and more. With our advanced solutions, you can rest easy knowing your home is ready to meet all of your electrical demands.
Qualified Electricians for Your Next Project
- Electrical Repair: We specialize in light fixture repairs, switch replacements, electrical short fixes, and more. Our repairs keep your home safe from hazards like electrical fires, shocks, and power surges.
- Electrical Installation: Get the best electrical system for your home with our expert installations. We install electrical panels, outlets, fixtures, generators, dedicated circuits, and more. Our smart home installation services work great for creating a more modern and connected house.
Maplewood is a great place to call home, no matter the neighborhood you live in. A trusted HVAC, plumbing, and electrical expert ensures your home stays fully functional year-round.
We started helping homeowners with electrical, HVAC, and plumbing in 1959. That means we have more than 65 years of industry experience. Our dedication to helping the local community has helped us build a reputation as the best home service provider around. We’ve earned more than 6,000 5-star reviews.
Despite being a small-town business, we bring premium skills and resources to every project we take on. All of our workers know how to deliver impressive results. We have everything necessary to handle your HVAC, plumbing, and electrical needs with precision. You can depend on us year-round to keep your home functional, safe, dry, and energy-efficient.
Contact Hurlburt now to schedule an appointment with Maplewood’s best HVAC company. We can send a plumber or electrician to your home quickly.
Responded to no cool complaint on 22-year-old Nordyne air conditioning system experiencing clicking noises and failure to engage. Diagnosed failed anti-short cycle board preventing proper voltage delivery to contactor. Bypassed defective board to restore system operation. Observed contactor damage from repeated arcing due to board failure. System appears low on R22 refrigerant, though accurate assessment difficult with elevated indoor temperature. Documented findings with photos of failed control board and voltage measurements. Reviewed repair options with customer and scheduled follow-up consultation for replacement recommendations.
Completed comprehensive air conditioning tune-up on residential split system, including inspection of indoor air handler unit in attic and outdoor condenser unit. Installed locking refrigerant line caps on outdoor unit to prevent tampering and unauthorized refrigerant access, which were previously missing from the system.
Completed comprehensive air conditioning tune-up and inspection on 8-year-old American Standard system. Unit was fully operational with no known issues at time of service. Installed locking refrigerant caps for security, added hard start kit to compressor for improved efficiency and longevity, and upgraded to new Ritetemp digital thermostat for enhanced temperature control.
Responded to no cooling call on 22-year-old Nordyne air conditioning system. Upon arrival, discovered abnormally high head pressure with no visible restrictions in the refrigerant circuit. Inspected condenser coil, which was clean with minor fin damage insufficient to restrict airflow. Measured compressor amp draw at near maximum rated capacity, indicating imminent compressor failure. Noted presence of utility saver switch that reportedly cycles system off at same time daily during peak demand periods, which may be contributing to perceived failure symptoms. However, diagnostic testing confirmed system is exhibiting clear signs of end-of-life compressor degradation independent of demand management cycling. Reviewed replacement options with homeowner and scheduled follow-up consultation with service advisor for system replacement recommendations.
Responded to a leaking outdoor water shutoff valve for the sprinkler system. Upon inspection, identified the leak originating at the pressure vacuum breaker (PVB). Replaced the defective PVB with a new unit, tested the assembly for proper operation, and attached the required certification tag to document compliance with backflow prevention standards.
Completed comprehensive dual-system tune-up on heat pump and furnace installed two years prior. Performed full furnace inspection including venting, exhaust flue, camera inspection of heat exchanger, burners, blower, inducer, pressure switch, safety switches, limit switches, flame sensor, and igniter; verified gas pressures and combustion air, cycled system on high and low settings confirming normal operation. Conducted air conditioning system inspection covering evaporator coil, blower, condenser and condenser coil, contactor, compressor, and all components; replaced air filter with homeowner-provided filter and verified refrigerant levels within specification. Both heating and cooling systems tested and confirmed operating safely and properly with all components functioning within normal parameters.
Completed comprehensive tune-up on both furnace and air conditioning systems. Furnace is 10+ years old operating on natural gas; air conditioning unit is 5 years old. **Furnace Maintenance Performed:** Conducted thorough inspection of heating system including venting and exhaust flue. Performed camera inspection of heat exchanger to assess integrity. Inspected and tested burners, blower motor, inducer motor, pressure switch, safety switches, and limit switches. Checked flame sensor and igniter for proper operation. Measured and verified gas pressures within manufacturer specifications. Evaluated combustion air supply. Cycled system through multiple heating stages on both high and low settings. Verified safe and proper operation throughout all cycles. Furnace is operating within normal parameters. **Air Conditioning Maintenance Performed:** Inspected evaporator coil, blower assembly, and air filter. Examined condenser unit and condenser coil. Checked contactor, compressor, and assoc
Responded to no-heat call on 15-year-old Trane furnace with reported humming noise from blower motor. Upon inspection, discovered heavily restricted MERV 12 air filter causing excessive static pressure, which forced the blower to ramp to high speed and created humming noise in ductwork. Replaced filter and confirmed noise elimination. Performed comprehensive system diagnostic including heat exchanger inspection using camera scope. Inspection revealed significant crack in heat exchanger located above factory crimp on lower burner cup section. Due to the critical safety hazard posed by potential carbon monoxide leakage into conditioned space, performed immediate safety lockout of equipment per industry protocol. Documented findings with photographs of internal components including blower assembly, gas valve, control boards, and wiring configuration. Reviewed all available options with homeowner including repair versus replacement considerations. Completed manufacturer warranty researc
Responded to no-heat call on furnace approximately 10 years old. Upon inspection, found system overheating due to restricted airflow. Cleaned clogged air filter and verified proper operation of blower motor assembly and control board connections. System now functioning correctly with normal heat cycle and no unusual odors.
Performed flush service on Rheem Performance tanked water heater that had never been previously maintained. Customer reported insufficient hot water duration, indicating likely sediment buildup. Successfully completed thorough system flush to remove accumulated sediment, restoring proper hot water capacity and improving unit efficiency.
Responded to service call for 40+ year old boiler with no heat to basement zone baseboards. Diagnosed air-locked bottom floor zone and observed evidence of water leakage from the heat exchanger on the bottom block. Performed system maintenance by draining, filling, and purging baseboard zones in basement, successfully restoring heat to the affected areas, though noted the boiler has no repair option for the heat exchanger leak.
Responded to no heat call for aging furnace in home under renovation. Diagnosed system overheating due to return air ducts being capped off with dirty filters during remodeling work. Restored proper operation by removing filter caps from return air ducts, allowing adequate airflow and resolving overheating condition.
Performed comprehensive furnace tune-up per customer request addressing heating concerns. Inspected system components including blower assembly, gas valve, and electrical connections; all found to be operating safely. Replaced furnace filter and identified separate issues with dryer venting that may be causing intermittent heat and extended dry times; quote for dryer vent replacement and cleaning to be provided separately.
Shortened kitchen water supply lines and reinstalled shutoff valves to accommodate new cabinet installation. Replaced leaking dishwasher valve and properly connected all components to ensure proper function and prevent leaks.
Performed comprehensive tune-up on 24-year-old furnace with focus on system safety and functionality. Diagnostic testing revealed a weak igniter, out-of-spec blower capacitor, and a potential hairline crack in the heat exchanger, though system remained operational. Documented issues with photographic evidence for customer's home warranty claim and discussed heat distribution concerns between floors.
Replaced non-functioning garbage disposal unit in kitchen. Inspected and repaired outdoor spigot that was stuck in the on position by replacing worn valve components. Tested both systems after repairs to confirm proper operation and no leaks.
Resolved no-heat complaint on 10+ year-old system exhibiting short cycling and watchdog mode error (primary/secondary switch open). Diagnostic testing revealed unit was overheating due to restrictive 3M filter and elevated gas pressure (10.10). Removed dirty filter, adjusted gas pressure to specification, and verified proper operation through complete heating cycle. Recommended customer install lower-restriction MERV 6-8 filter for optimal system performance.
Responded to customer with non-operational Bradford White 72-gallon natural gas water heater. Upon inspection, found unit was leaking and failed to ignite, requiring immediate shutdown with power disconnected and water supply to home turned off. Customer informed of replacement options and HVAC service advisor requested for quote on tankless combi boiler replacement.
Responded to no-heat call for 28-year-old furnace that was blowing cold air and not igniting. Diagnostic testing confirmed failed hot surface igniter (HSI). Replaced defective HSI component and verified proper system operation with combustion analysis using Testo 310 analyzer.
Responded to no heat call for furnace operating 12° below setpoint. Diagnostic testing revealed failed inducer motor with visible corrosion and rust formation on internal components. Successfully replaced inducer motor assembly, restoring proper system operation and heat production.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions | [cookie_preferences_link]
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.