HVAC, Plumbing, Electrical & IAQ in Elk Mound, WI
Highly Rated
Satisfaction Guaranteed
0% Financing
Friendly Technicians
Proven Heating Repair in Elk Mound, WI
Furnaces, boilers and heat pumps are the most common heating systems in Elk Mound. We’ll go over the benefits and drawbacks of each option so that you fully understand them. Many homeowners pair a heat pump with a furnace. The heat pump provides cooling during the summer and efficient heating during the winter. When the temperature drops below freezing, the furnace kicks on. Having this reliable form of backup heat ensures you never have to worry about staying warm.
Our Heating Services
- Heating Repair: We replace cracked heat exchangers, faulty sensors, failing igniters, and more.
- Heating Installation: We’ll consider multiple factors to choose a setup that matches your home’s unique heating needs.
- Heating Maintenance: Regular tune-ups are crucial to keeping your system operating efficiently. You can access priority service and discounts through the Hurlburt Family Rewards Program.
Fast & Reliable Cooling Repair in Elk Mound, WI
Central AC is an excellent option for homes that prefer consistent comfort and powerful cooling. We’ll perform load calculations to choose the correct size equipment. Undersizing and oversizing both waste energy and increase your cooling costs. They also result in hot and cold spots that make the home uncomfortable. Our accurate sizing process avoids these issues from the start.
If you want the most precise form of cooling, we’ll recommend a zoned setup. You’ll have room-by-room temperature control, which is great for homes with multiple floors. When you need an AC repair in Elk Mound, WI, help is just a phone call away.
Our Cooling Solutions
- Cooling Repair: We replace broken seals, faulty capacitors, fix leaky refrigerant lines, and other issues. Using advanced diagnostic equipment lets us pinpoint problems without relying on guesswork.
- Cooling Installation: Your new air conditioner will keep every part of the home cool and comfortable all summer.
- Cooling Maintenance: Join the Hurlburt Family Rewards Program to simplify scheduling maintenance and receive member discounts.
Residential Plumbers in Elk Mound, WI
Remodeling your kitchen or bathroom? If so, we can do all of the plumbing upgrades. If you’re installing a garbage disposal, we may need to add a dedicated circuit. This helps keep the breaker from tripping when using the new appliance. If you want to update the bathroom with a new toilet, we can install a low-flow model that saves water.
If you’re constantly running out of hot water, it may be time to go tankless. Tankless water heaters not only provide continuous hot water but also use less energy. This means you save money on utility bills. And because they don’t require a storage tank, there’s a lower risk of leaks and flooding.
Our Plumbing Specialties
- Plumbing Repair: We find and fix hidden leaks, clear clogged drains, fix broken water heaters, and more. We’ll keep your home leak-free and energy efficient.
- Plumbing Installation: Get a new sump pump, water heater, faucet, or toilet installed. All installations come with safety and quality checks.
Complete Electrical Support in Elk Mound
Our electricians in Elk Mound, WI have extensive training for installing and fixing electrical systems. If you want better airflow in your home, we can install new ceiling fans.
Remodeling often requires adding new switches and outlets. We’ll consider the home’s layout and lighting when choosing where to place them.
We’ll inspect your panel to make sure it has adequate capacity. Upgrades to breakers and wiring are sometimes necessary for safety or performance reasons. You may need a full-panel upgrade to add an EV charger. 100-amp panels don’t have enough capacity to safely support EV charging. By adding a larger panel with ample capacity, you won’t have to worry about overloads.
Electrical Upgrades Done Right
- Electrical Repair: We fix faulty wiring, broken outlets, failing panels, and more.
- Electrical Installation: Our electricians in Elk Mound, WI install new wiring, EV chargers, and other electrical equipment. We follow all local codes, so you don’t have to fret about violations or safety issues.
Affordable Home Services in Elk Mound, WI
Many homes near County Road U need sump pumps to manage spring snowmelt and heavy rainfall. Our team installs these devices, including submersible, battery backup, and pedestal types.
Homeowners along Highway 93 often have us install whole-home generators to prepare for storm-related power outages. We’ll connect the transfer switch and set up the wiring so that everything functions reliably.
If you live near Beaver Creek Reserve and want better indoor air quality, we can install a whole-home air purifier. Other solutions for indoor air quality in Elk Mound, WI include whole-home humidifiers and dehumidification systems.
Book High-Quality Home Solutions Today
Our customers love our people-driven culture. They frequently leave us 5-star reviews, praising us for our professionalism and reliability. You can read through thousands of them to see why they keep choosing us.
We come to all jobs with fully stocked trucks to fix most problems in one visit. If we ever have to turn off the home’s water or electrical supply, we’ll let you know in advance. Our fast service for emergency HVAC in Elk Mound is greatly appreciated when there are refrigerant leaks or sudden system breakdowns. We’ll arrive quickly to restore comfort with a long-term solution. The Hurlburt Family Rewards Club helps you stay on top of essential maintenance that improves the home’s energy performance and comfort.
Contact Hurlburt today to book service for electric, plumbing, HVAC, and indoor air quality in Elk Mound, WI.
Recent Jobs and Reviews in Elk Mound, WI
Elk Mound, WI at a glance
Hurlburt Heating & Plumbing has completed 20 jobs in Elk Mound, WI between March 2026 and June 2026.
The most recent job was on June 6, 2026.
Hurlburt Heating & Plumbing has completed 174 jobs in Elk Mound, WI in the last 12 months. The first job there was in October 2015.
Job Locations and Reviews
David B.
Completed installation of CBA38MV air handler with Quantum aluminum coil and variable speed blower motor (2.5 ton capacity), EL22XPV heat pump system, and new thermostat while retaining existing thermostat for in-floor heating system. Installed electric heat kit in air handler per customer request. Verified proper leveling of outdoor heat pump condenser unit and confirmed all electrical connections and control board wiring are secure. Noted tee fitting near pressure tank requires inspection for potential leak and recommended scheduling separate visit for like-for-like electric boiler replacement to avoid mechanical room congestion.
Elk Mound, WI 54739
Noah S.
Performed annual inspection on A.O. Smith tanked water heater in preparation for property sale. Conducted comprehensive visual inspection of unit, verifying proper condition of temperature/pressure relief valve, discharge piping, gas line connections, and all copper supply lines. Briefly opened drain valve with attached hose to check for sediment buildup; found no sediment present, indicating proper maintenance history. Inspected all safety labels, electrical connections, and surrounding mechanical systems. Unit found to be in excellent operating condition with no deficiencies noted.
Elk Mound, WI 54739
Dan S.
Responded to no cooling condition on geothermal heat pump system. Found failed run capacitor and hard start capacitor with burned wiring connections. Replaced both capacitors, repaired damaged wiring, and performed test run with satisfactory operation. Unit running properly at time of departure, though compressor longevity may be affected by component failures.
Elk Mound, WI 54739
Liam D.
Responded to no cooling complaint on 8-year-old residential air conditioning system with reported ice buildup. Upon arrival, confirmed system was low on refrigerant charge. Discussed repair options with homeowner, who elected to proceed with recharging the system. Added refrigerant to manufacturer specifications and injected UV dye into the system for future leak detection if needed. Cycled system through complete cooling operation and verified proper function. All operating parameters returned to normal range. System restored to full cooling capacity.
Elk Mound, WI 54739
Bryson E.
Responded to a callback for a leaking main water line at the crimp connection. Upon arrival, identified an additional issue with a ball valve leaking near the pressure tank. Replaced the defective ball valve with a new unit, resolving both the dripping condition and ensuring proper system operation. Documented the completed repairs with photos showing the pressure tank assembly and updated copper piping configuration with new valve installation.
Elk Mound, WI 54739
Colten C.
Completed preventive maintenance tune-up on one-year-old Lennox air conditioning system. Performed comprehensive inspection with all components operating within manufacturer specifications. Rinsed condenser coil, verified brand new air filter in place, and confirmed proper system performance with 25-degree temperature split across evaporator coil.
Elk Mound, WI 54739
Noah S.
Responded to a leak at washing machine hookup connections previously installed approximately seven months prior. Upon inspection, discovered the cold water supply line fitting was loose at the connection point. Disassembled the cold side connection, applied fresh Teflon tape and pipe dope to threads, and properly reassembled the fitting. Tested system for leaks and verified secure, watertight connection. Advised that if leaking recurs, wall-mounted drop ells will require replacement.
Elk Mound, WI 54739
Trent L.
Completed Family Rewards cooling maintenance visit on residential air conditioning system. Removed condenser panels and thoroughly cleaned coils, rinsing debris from unit. Inspected all electrical components and tested capacitor, which measured within specification at 35/5 MFD. Verified indoor air filter had been recently replaced. Confirmed evaporator drain line was clear and draining properly. Checked blower settings and confirmed proper configuration. Started system and monitored operation for approximately 15 minutes, verifying 23-degree temperature split across coil. All components operating within normal parameters with no issues identified.
Elk Mound, WI 54739
Bryson E.
Responded to a water leak at the pressure tank assembly. Upon inspection, identified two leak sources: a faulty pressure switch and a deteriorated ball valve. Replaced the ball valve, pressure switch, pressure gauge, and pressure tank drain valve to restore system integrity and prevent further water damage.
Elk Mound, WI 54739
Noah S.
Responded to kitchen sink leak caused by improper supply line adapter installation. Removed faulty connections and installed two new compression straight stops to provide proper shut-off capability where none previously existed. Tested all connections and verified system is leak-free and functioning properly.
Elk Mound, WI 54739
Trevor P.
Completed comprehensive preventive maintenance on both furnace and air conditioning systems. Performed furnace inspection including cleaning of routine components, motor inspection, heat exchanger evaluation, and operational verification with all systems functioning properly. Conducted air conditioning maintenance including condenser coil cleaning, electrical component inspection, refrigerant charge verification with 19-degree temperature differential within specifications, drain line clearing, and installation of customer-supplied air filter. All equipment operating as designed with no deficiencies noted.
Elk Mound, WI 54739
Liam D.
Responded to no heat call on 20-year-old furnace experiencing intermittent failure to ignite. Unit was running through cycle but shutting down without firing, displaying same fault code as previous service call earlier in the year. Upon diagnostic testing, discovered no 24-volt signal present to or through the pressure switch circuit during initial troubleshooting. Performed comprehensive system testing and attempted to replicate the failure condition by cycling unit multiple times and forcing potential trip scenarios. Issue did not recur during extended testing period, suggesting intermittent electrical fault in low-voltage control circuit or pressure switch assembly. Given age of equipment and history of recurring intermittent failures, recommended monitoring system closely and considering replacement due to reliability concerns with 20-year-old components.
Elk Mound, WI 54739
Bryson E.
Reinstalled complete plumbing assembly underneath double-basin kitchen sink following previous removal. Reconnected water supply lines and drain system, including P-trap configuration, white PVC drain lines, and garbage disposal unit with associated discharge piping. Verified all connections secure, tested system for proper drainage and confirmed no leaks present.
Elk Mound, WI 54739
Mike B.
Responded to furnace exhaust pipe leak in utility space. Upon inspection, identified failed 2-inch PVC elbow fitting on vent pipe system causing water dripping from condensate line leading outside. Removed defective elbow, installed new 2-inch PVC elbow with proper primer and cement application, and verified all connections were secure. Ran furnace for approximately 10 minutes to test system under normal operating conditions and confirmed leak was eliminated with no further dripping observed.
Elk Mound, WI 54739
Noah S.
Responded to callback for sump pump malfunction following recent installation. Upon inspection, identified that the float switch was positioned several inches too high, preventing the primary pump from activating at the proper water level. This caused the battery backup system to engage prematurely before the main sump pump could operate. Adjusted float switch downward by several inches to ensure proper activation sequence, with primary pump now triggering before backup system. Tested operation to verify correct cycling and proper water level management. Issue resolved.
Elk Mound, WI 54739
Dan S.
Performed comprehensive inspection of LifeBreath Heat Recovery Ventilator (HRV) system that had not been operated in six years. Verified unit operational status, inspected all ductwork connections and airflow pathways, and confirmed mechanical components functioning properly. Unable to locate dedicated wall control or thermostat for HRV operation; system likely controlled by integrated sensor or automated control sequence within the unit itself.
Elk Mound, WI 54739
Bryson E.
Disconnected water supply lines and drain plumbing for double-basin kitchen sink to facilitate countertop replacement. Shut off water valves beneath sink cabinet, removed P-trap and drain connections, and capped supply lines to prevent water damage during renovation. Return visit will be scheduled to reconnect all plumbing fixtures once new countertops are installed and kitchen island is repositioned.
Elk Mound, WI 54739
Ben W.
Completed comprehensive AC tune-up on recently installed system from September. Performed full system operational testing, verified air filter condition, confirmed drain line was clear and flowing properly, inspected and cleaned outdoor condenser unit, and identified and secured a loose wire connection. All components tested and verified operating within normal parameters upon completion.
Elk Mound, WI 54739
Shawn G.
Responded to emergency plumbing situation caused by broken shut-off valve during floor replacement project, resulting in flooding to bathroom and basement. Replaced failed toilet supply line that snapped at connection point and installed new hot and cold boiler drains for washing machine to address leaking cold water valve. Restored water service to residence after completing all repairs and verified all connections were secure and leak-free.
Elk Mound, WI 54739
Ben W.
Inspected disconnected 8-inch insulated flex duct in underfloor area that had been damaged by rodents. Assessed approximately 12 feet of ductwork requiring replacement, with visible holes and separation at connection points. Documented condition with photographs showing the deteriorated metal ductwork in the crawlspace environment.
Elk Mound, WI 54739
“Mark was very pleasant to work with! He was on time and took care of my plumbing needs efficiently and effectively. I would definitely use him again for any plumbing issues I may have. I have been using Hurlburt for all of my heating, plumbing, and electrical needs and have always been satisfied!”
Alison A.
“Great service! Professionals starting from the first person I spoke to on the phone and finalizing with the person who finished the installation and cleaned up after. Staff explained everything well. Highly recommended!!!”
Jessica F.
"Outstanding service as always! Hurlburt goes above and beyond for their customers. We got scheduled right away, and Shawn did a great job. I will continue to use these guys for everything!!!"
Nicole T.
"Our technician Mike was just awesome. Took the time to show me what he was doing and explained why he was doing it. Gave me an honest evaluation of my situation. You can’t go wrong with Hurlburt and the work ethics of the employees."
Jean C.
Trevor came to service our AC unit. Very happy with his work. Trevor was friendly and knowledgeable, and got our issue fixed quickly. Hurlburt Heating and Plumbing is a great company to work with."
Debbie L.
"Hurlburt has helped us out with both plumbing and HVAC services in the past and have always done a great job. All their technicians, especially Mark, have been kind, professional, and quick with service!"
Sara N.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.
