
Furnaces, boilers and heat pumps are the most common heating systems in Elk Mound. We’ll go over the benefits and drawbacks of each option so that you fully understand them. Many homeowners pair a heat pump with a furnace. The heat pump provides cooling during the summer and efficient heating during the winter. When the temperature drops below freezing, the furnace kicks on. Having this reliable form of backup heat ensures you never have to worry about staying warm.
Central AC is an excellent option for homes that prefer consistent comfort and powerful cooling. We’ll perform load calculations to choose the correct size equipment. Undersizing and oversizing both waste energy and increase your cooling costs. They also result in hot and cold spots that make the home uncomfortable. Our accurate sizing process avoids these issues from the start.
If you want the most precise form of cooling, we’ll recommend a zoned setup. You’ll have room-by-room temperature control, which is great for homes with multiple floors. When you need an AC repair in Elk Mound, WI, help is just a phone call away.
Remodeling your kitchen or bathroom? If so, we can do all of the plumbing upgrades. If you’re installing a garbage disposal, we may need to add a dedicated circuit. This helps keep the breaker from tripping when using the new appliance. If you want to update the bathroom with a new toilet, we can install a low-flow model that saves water.
If you’re constantly running out of hot water, it may be time to go tankless. Tankless water heaters not only provide continuous hot water but also use less energy. This means you save money on utility bills. And because they don’t require a storage tank, there’s a lower risk of leaks and flooding.
Our electricians in Elk Mound, WI have extensive training for installing and fixing electrical systems. If you want better airflow in your home, we can install new ceiling fans.
Remodeling often requires adding new switches and outlets. We’ll consider the home’s layout and lighting when choosing where to place them.
We’ll inspect your panel to make sure it has adequate capacity. Upgrades to breakers and wiring are sometimes necessary for safety or performance reasons. You may need a full-panel upgrade to add an EV charger. 100-amp panels don’t have enough capacity to safely support EV charging. By adding a larger panel with ample capacity, you won’t have to worry about overloads.
Many homes near County Road U need sump pumps to manage spring snowmelt and heavy rainfall. Our team installs these devices, including submersible, battery backup, and pedestal types.
Homeowners along Highway 93 often have us install whole-home generators to prepare for storm-related power outages. We’ll connect the transfer switch and set up the wiring so that everything functions reliably.
If you live near Beaver Creek Reserve and want better indoor air quality, we can install a whole-home air purifier. Other solutions for indoor air quality in Elk Mound, WI include whole-home humidifiers and dehumidification systems.
Our customers love our people-driven culture. They frequently leave us 5-star reviews, praising us for our professionalism and reliability. You can read through thousands of them to see why they keep choosing us.
We come to all jobs with fully stocked trucks to fix most problems in one visit. If we ever have to turn off the home’s water or electrical supply, we’ll let you know in advance. Our fast service for emergency HVAC in Elk Mound is greatly appreciated when there are refrigerant leaks or sudden system breakdowns. We’ll arrive quickly to restore comfort with a long-term solution. The Hurlburt Family Rewards Club helps you stay on top of essential maintenance that improves the home’s energy performance and comfort.
Contact Hurlburt today to book service for electric, plumbing, HVAC, and indoor air quality in Elk Mound, WI.
Hurlburt Heating & Plumbing has completed 10 jobs in Elk Mound, WI between September 2025 and October 2025.
The most recent job was on October 14, 2025.
Hurlburt Heating & Plumbing has completed 174 jobs in Elk Mound, WI in the last 12 months. The first job there was in October 2015.
Diagnosed multiple leak issues in water heater system, including temperature and pressure (T&P) valve, recirculation pump, and pressure tank. Provided customer with estimate for replacement of T&P valve, recirculation pump, and pressure tank to resolve all leaking components.
Performed comprehensive furnace inspection which revealed extensive system damage including water-damaged circuit board preventing operation, severely rusted heat exchanger with bottom deterioration, and significant outdoor condenser issues including coil damage from pet urine. Customer declined repairs; provided replacement options including current buy-one-get-one promotion and scheduled follow-up with sales advisor.
Responded to service call regarding a leaking plumbing connection in basement. Inspection revealed a slow drip from the black Fernco connector on a 1½" pipe that was creating a puddle on the floor. Tightened the Fernco coupling to proper specification and performed successful leak test, resolving the issue.
Replaced damaged sump pump lid on existing system in basement utility area. Although the existing pump was operational but aging, customer declined full pump replacement after price discussion. Completed installation of new lid to ensure proper sump system functionality and safety.
Investigated low water pressure issue affecting multiple areas of residence with no water supply to garage shop. Discovered closed ball valve preventing water flow to the garage shop area. Restored service by opening the ball valve and adjusted pressure switch settings from 60 PSI to 70 PSI to improve overall system pressure throughout the property.
Performed scheduled furnace maintenance including cleaning flame sensor, verifying electrical components within specifications, and confirming proper system operation. Inspected drain lines which were found to be clear. Completed comprehensive tune-up with all systems functioning correctly.
Responded to service call for a clogged master bathroom toilet that had been recently installed. Successfully cleared the blockage by using an auger on the toilet to restore proper function.
Cleared kitchen sink drain clog approximately 6 feet into the wall using an auger. Clog appeared to be grease-related, causing extremely slow drainage. Advised tenant on preventative maintenance to run hot water after washing dishes to minimize future grease buildup.
Responded to service call for an A/C system that wasn't running properly with fan continuously operating. Determined roll out switch was tripped, causing the continuous fan operation and preventing cooling function. Reset roll out switch which immediately restored normal A/C operation. Inspection with camera revealed separations in two burner inlets creating oxygen leaks, causing excessive combustion issues and soot buildup. Heat exchanger showed significant corrosion with visible cracks. Unit was tagged for safety and customer was informed about necessary heat exchanger replacement.
Performed scheduled furnace tune-up on 9-year-old unit per maintenance agreement. Replaced dirty filter (customer-supplied), cleaned condensate system, and removed soot buildup from burners that initially prevented proper ignition. Noted significant burner corrosion and concerning areas on heat exchanger first bends, though no visible cracks were detected. After service, furnace operated properly with correct temperature rise, but recommended heat exchanger replacement evaluation and system upgrade pricing due to orange flame appearance and soot accumulation in exhaust.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.