Since 1959 Hurlburt, we make it our mission to keep your home comfortable and protected.

Heating calls in Eau Claire come with a wide mix of systems because the city has homes from nearly every era. Older neighborhoods like East Hill and Third Ward still have boiler systems, radiant heat, and homes that were never originally designed for central air. Meanwhile, many mid-century homes throughout Eau Claire still rely on aging forced-air furnaces that struggle to keep up during long Wisconsin winters.
We see a lot of airflow issues, aging heat exchangers, undersized ductwork, and systems that have simply reached the end of their lifespan. During sub-zero stretches, those problems become obvious fast.
Eau Claire summers can get surprisingly humid, especially near the Chippewa River and lower areas around Half Moon Lake. That humidity puts extra strain on older AC systems, particularly in homes that were not originally built with central air.
We work on a lot of mid-century homes where the ductwork was designed for heating first and cooling second. That often leads to uneven temperatures, weak airflow upstairs, and systems that cannot keep up during July heat waves.
Plumbing problems in Eau Claire often come down to age, freezing temperatures, and older infrastructure. Homes in older parts of the city can still have aging drain lines, outdated water piping, or plumbing systems that have been patched together over several decades.
During Wisconsin winters, frozen pipes and sump pump failures become common calls, especially during freeze-thaw cycles. We also see a steady demand for water softeners and water filtration systems throughout the Eau Claire area.
Older Eau Claire homes often have tight mechanical spaces and aging plumbing layouts that require experience to service properly.
If you are dealing with leaks, drain backups, or sump pump problems, we can help, call (715) 227-4145 today or connect with Hurlburt online to schedule service.
Electrical systems across Eau Claire vary just as much as the housing stock itself. Some older homes still operate on outdated panels that were never designed for modern electrical demand. We regularly see overloaded circuits, insufficient panel capacity, and aging wiring in homes built before the 1970s.
At the same time, newer neighborhoods are adding EV chargers, smart home systems, generators, and additional electrical loads that require upgraded infrastructure.
The dry winters and humid summers in Eau Claire create year-round indoor air quality challenges. During the winter, many homes become extremely dry once the furnace runs constantly. In the summer, excess humidity can leave the house feeling sticky even when the AC is operating.
A lot of homeowners also deal with dust buildup, pet dander, and poor airflow, especially in older homes with aging duct systems.
The right humidity and filtration setup can make a noticeable difference throughout the year. Call (715) 227-4145 today or connect with Hurlburt online to improve your comfort.
We are already working throughout Eau Claire every single day. This is not a secondary service market for us. It is where our company has operated for generations.
You have likely seen us at the Chippewa Valley Home Show, sponsoring the Fairfax Pool or Hobbs Ice Arena, or on WEAU 13 News during the Morning Connection segments where we share seasonal homeowner tips.
Hurlburt Heating & Plumbing has completed 20 jobs in Eau Claire, WI in October 2026.
The most recent job was on October 11, 2026.
Hurlburt Heating & Plumbing has completed 3,548 jobs in Eau Claire, WI in the last 12 months. The first job there was in October 2015.
Completed comprehensive heating maintenance and furnace tune-up on residential HVAC system. Tested and verified proper furnace operation, measured temperature rise within specifications, and confirmed gas pressure at appropriate levels. Replaced air filter, cleared condensate drain and trap, cleaned flame sensor, and inspected igniter for proper function. Performed thorough inspection of blower compartment and confirmed all components operating correctly. System tested and left in full working order for the heating season.
Completed scheduled heating maintenance on Lennox and International Comfort Products HVAC systems. Performed comprehensive furnace tune-up including operational testing, gas pressure verification, and temperature rise measurement. Cleaned flame sensor, tested igniter functionality, and inspected pressure switch ports. Verified air filter and blower compartment cleanliness, confirmed condensate drain clear. Cleared error codes from control board and tested humidifier operation. Installed new humidifier pad and provided guidance on proper replacement pad specifications for future maintenance. All systems tested and confirmed operating within normal parameters.
Responded to water leak emergency in kitchen area where active dripping was occurring through drop ceiling onto floor and ductwork below cabinet. Upon investigation, located pinhole leak in copper water supply line beneath kitchen sink. Removed damaged section of copper pipe and replaced with PEX tubing using appropriate fittings and connections. Tested system for proper water flow and verified no additional leaks present. Restored water service to affected area.
Returned to complete installation of electronic air filters that were washed during previous visit and left to dry overnight. Reinstalled the dried CleanEffects main filter cores, reset the timer on the electronic air filter system, and performed operational testing of the heating system to verify proper function. Completed comprehensive maintenance on 2011 Trane two-stage furnace as part of annual agreement. Performed thorough inspection of heat exchanger for crimp cracks with no defects found. Verified electronic controls and safety switches operating correctly. Replaced standard Aprilaire media air filter. Vacuumed CleanEffects pre-filter and washed both main filter cores thoroughly. Confirmed furnace operating normally with no fault codes present and all system components functioning as designed.
Responded to no heat call on 6-year-old furnace system blowing cold air on first use of heating season. Diagnosed two-stage gas valve malfunction where unit would initiate in first stage but fail to advance to second stage, resulting in premature shutdown and no heat output. Performed complete system inspection and component testing to verify gas valve as root cause of heating failure. Confirmed all other furnace components operating within normal parameters. Replacement gas valve ordered for follow-up installation to restore full two-stage heating operation.
Completed phone follow-up with customer to clarify estimate details and explain the purpose and function of the secondary valve device included in the proposal. Customer's questions were answered and understanding of the recommended equipment was confirmed.
Completed scheduled heating maintenance on a 2022 Lennox EL296 furnace. Verified first-stage and second-stage manifold gas pressures at 1.7 in. w.c. and 3.5 in. w.c. respectively, confirming proper operation. Replaced air filter and tightened all thermostat and control board connections to ensure reliable electrical contact. Confirmed inducer motor amp draw and capacitor readings are within manufacturer specifications. Inspected Honeywell T4 thermostat with four-wire control wiring and verified proper operation. Performed visual inspection of rooftop vent termination from grade level with no issues observed. All system components tested and operating normally with no deficiencies noted.
Completed comprehensive maintenance agreement service on 6-year-old furnace and air conditioning system. Performed furnace tune-up including flame sensor cleaning, igniter inspection, and operational testing with temperature rise confirmed within manufacturer specifications. Replaced customer-provided air filter and humidifier pad. Cleared condensate drain line and inspected blower compartment for proper operation. Repaired rodent-damaged control wiring with new wire connectors to restore safe electrical connections. Performed air conditioning maintenance including condenser coil cleaning and system testing, achieving 20-degree temperature split in cooling mode. Identified UV bulb requiring replacement and provided pricing options for duct cleaning services and UV bulb replacement upon request.
Completed scheduled heating maintenance on a 2-year-old Lennox system as part of Family Rewards program membership. Performed comprehensive furnace inspection with no issues identified. Verified roof terminations were in proper condition. Removed evaporator cover and conducted condensate drain line test by pouring 60 ounces of water to confirm proper drainage. Inspected all system components and terminations. Photographed electrical panel and air filter during service visit. System operating within normal parameters with no repairs required.
Responded to service call for water treatment system displaying Error Code A3 with audible alarm. Diagnosed failed UV sterilization light in whole-house ultraviolet water purification system. Replaced UV lamp and verified proper operation of ballast and control unit. Additionally performed maintenance on under-sink reverse osmosis filtration system, replacing all RO membrane filters and cartridges. Tested both systems for proper flow rates and confirmed error code cleared with all indicators showing normal operation.
Responded to emergency call for water supply disconnection at washing machine location. Upon arrival, found washing machine supply hoses completely disconnected from shut-off valves, resulting in water spray damage to walls and floor. Main water supply to residence had been shut off by occupant to prevent further water damage. Reconnected washing machine supply hoses to hot and cold water shut-off valves, ensuring proper threaded connections and adequate hand-tightening to prevent future leaks. Restored water supply to residence and tested connections for leaks under full pressure. Provided detailed instruction on proper operation of washing machine shut-off valves, including demonstration of valve positioning and proper sequence for shutting off water supply before disconnecting hoses. Explained correct procedure for routine maintenance and cleaning of supply connections, emphasizing the importance of shutting off valves and relieving line pressure before disconnecting hoses to prev
Completed routine plumbing inspection addressing kitchen sink sprayer malfunction and water heater thermostat adjustment. Diagnosed and resolved stuck sprayer button that was causing 45-second delayed shutoff by freeing the mechanism and applying lubricant to reduce friction. Instructed homeowner on proper water heater thermostat adjustment procedure and verified all plumbing systems were functioning correctly.
Completed scheduled heating system maintenance as part of Family Rewards maintenance campaign. Upon inspection, furnace showed significant deterioration with worsened heat exchanger condition compared to previous October service visit. Observed substantial frost/ice accumulation on internal components indicating potential condensation issues and compromised system integrity. Heat exchanger exhibited advanced deterioration with visible surface damage and wear patterns consistent with end-of-life failure. Consulted with management regarding equipment condition and documented findings with comparative photos. Due to extensive deterioration, inexpensive replacement value, and safety concerns related to heat exchanger integrity, unit was red-tagged and taken out of service. Recommended immediate furnace replacement due to age, condition, and potential safety hazards.
Performed pre-winter maintenance on a 10-year-old furnace system. Tested furnace operation, verified temperature rise and combustion parameters within acceptable range. Confirmed air filter was clean and cleared condensate drain line. Inspected and cleaned igniter and flame sensor. Removed blower assembly to access and inspect secondary heat exchanger, where multiple failures were discovered. Tagged out furnace due to safety concerns with heat exchanger integrity. Testing revealed weak blower capacitor reading below specification. Noted inducer motor producing abnormal noise indicating bearing wear or impeller issues. Documented all findings with photographs and provided comprehensive repair pricing options to customer. Scheduled service advisor consultation to review replacement recommendations and system options.
Completed comprehensive plumbing inspection including evaluation of dripping shower head in spare bathroom and full system assessment. Inspected tankless water heater unit, expansion tanks, circulation pump, pressure gauges, copper piping network, valves, and all associated connections for proper operation and potential issues. Documented mechanical room installation and plumbing system components with diagnostic equipment to ensure all fixtures and heating system elements are functioning within normal parameters.
Completed scheduled heating maintenance on both boiler and furnace systems. Tested boiler operation across all zones, verified system pressure at 15 psi, removed front cover to clean igniter and heat exchanger, and cleared condensate drain. Proceeded to furnace where operation was tested and gas pressure verified within specifications. Replaced air filters, inspected blower compartment, tested pressure switch functionality, cleared condensate drain, and cleaned flame sensor and igniter. All systems operating properly upon completion.
Responded to a dual plumbing issue involving a leaking shower valve and a leaking main water shut-off valve located before the meter. Upon inspection, found the shower valve cartridge was broken and causing water leakage in the downstairs shower. The main shut-off valve was also leaking badly at the handle area, which occurred after the homeowner attempted to replace the shower faucet and cycled the main valve. Tightened the bonnet nut on the main shut-off valve before the meter to stop the leak at that location. Replaced the broken shower cartridge with a new unit, restoring proper function to the shower control system. Both repairs successfully completed, restoring full water service to the residence.
Returned to address loose handle and leaking issue on outdoor frost-free spigot previously serviced under warranty. Found packing nut extremely loose, possibly disturbed after initial repair. Tightened packing nut to proper torque specification to eliminate leak and restore proper handle operation.
Performed comprehensive duct cleaning service for single-story residential system, including all supply and return vents plus dryer vent exhaust. Removed significant accumulation of lint, dust, and debris from ductwork and ventilation components, addressing heavy buildup that had collected over time. Cleaned all accessible vent registers, dryer vent line, and HVAC system components to restore proper airflow and reduce fire hazard risk associated with excessive lint accumulation.
Completed comprehensive furnace tune-up on 8-year-old Lennox heating system. Performed full maintenance protocol including inspection of all components, electrical connections, and operational testing. Noted inducer motor producing slight noise during operation but remaining within acceptable operating parameters. All safety controls verified functional, system operating properly with no immediate service needs identified.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.