Since 1959 Hurlburt, we make it our mission to keep your home comfortable and protected.

Heating calls in Eau Claire come with a wide mix of systems because the city has homes from nearly every era. Older neighborhoods like East Hill and Third Ward still have boiler systems, radiant heat, and homes that were never originally designed for central air. Meanwhile, many mid-century homes throughout Eau Claire still rely on aging forced-air furnaces that struggle to keep up during long Wisconsin winters.
We see a lot of airflow issues, aging heat exchangers, undersized ductwork, and systems that have simply reached the end of their lifespan. During sub-zero stretches, those problems become obvious fast.
Eau Claire summers can get surprisingly humid, especially near the Chippewa River and lower areas around Half Moon Lake. That humidity puts extra strain on older AC systems, particularly in homes that were not originally built with central air.
We work on a lot of mid-century homes where the ductwork was designed for heating first and cooling second. That often leads to uneven temperatures, weak airflow upstairs, and systems that cannot keep up during July heat waves.
Plumbing problems in Eau Claire often come down to age, freezing temperatures, and older infrastructure. Homes in older parts of the city can still have aging drain lines, outdated water piping, or plumbing systems that have been patched together over several decades.
During Wisconsin winters, frozen pipes and sump pump failures become common calls, especially during freeze-thaw cycles. We also see a steady demand for water softeners and water filtration systems throughout the Eau Claire area.
Older Eau Claire homes often have tight mechanical spaces and aging plumbing layouts that require experience to service properly.
If you are dealing with leaks, drain backups, or sump pump problems, we can help, call (715) 227-4145 today or connect with Hurlburt online to schedule service.
Electrical systems across Eau Claire vary just as much as the housing stock itself. Some older homes still operate on outdated panels that were never designed for modern electrical demand. We regularly see overloaded circuits, insufficient panel capacity, and aging wiring in homes built before the 1970s.
At the same time, newer neighborhoods are adding EV chargers, smart home systems, generators, and additional electrical loads that require upgraded infrastructure.
The dry winters and humid summers in Eau Claire create year-round indoor air quality challenges. During the winter, many homes become extremely dry once the furnace runs constantly. In the summer, excess humidity can leave the house feeling sticky even when the AC is operating.
A lot of homeowners also deal with dust buildup, pet dander, and poor airflow, especially in older homes with aging duct systems.
The right humidity and filtration setup can make a noticeable difference throughout the year. Call (715) 227-4145 today or connect with Hurlburt online to improve your comfort.
We are already working throughout Eau Claire every single day. This is not a secondary service market for us. It is where our company has operated for generations.
You have likely seen us at the Chippewa Valley Home Show, sponsoring the Fairfax Pool or Hobbs Ice Arena, or on WEAU 13 News during the Morning Connection segments where we share seasonal homeowner tips.
Hurlburt Heating & Plumbing has completed 20 jobs in Eau Claire, WI in October 2026.
The most recent job was on October 6, 2026.
Hurlburt Heating & Plumbing has completed 3,568 jobs in Eau Claire, WI in the last 12 months. The first job there was in October 2015.
Completed annual furnace tune-up and maintenance inspection with no issues found. Cleaned flame sensor, performed electrical testing with all readings within manufacturer specifications, replaced air filter, verified all drain hoses were clear and draining properly, and confirmed heat exchanger condition was satisfactory.
Completed comprehensive furnace tune-up on Lennox brand HVAC system located in basement utility area. Performed standard maintenance procedures including inspection of all system components, verification of proper operation, and documentation of equipment condition. All components found to be functioning properly with no issues identified during service visit.
Responded to service call for reported campfire smokey smell from furnace upon initial startup of heating season. Performed thorough inspection of Distinctions brand furnace unit including visual examination of all accessible components and combustion chamber. Utilized inspection camera to conduct detailed internal examination of heat exchanger for cracks, deterioration, or carbon buildup that could produce odor. Monitored complete furnace operation cycle while observing burner ignition, flame characteristics, and airflow patterns. No defects, damage, or safety concerns identified with heat exchanger or combustion system. Determined odor likely attributed to normal dust burn-off from extended period of inactivity during summer months, which is common during first heating cycle of the season. Unit operating within normal parameters with proper ignition sequence and no abnormal conditions detected.
Completed Family Rewards Program heating maintenance on Lennox furnace system. Performed comprehensive tune-up including cleaning of routine components, testing of all operational parts, and full system evaluation. Verified proper operation of both heat pump and gas heating modes with all equipment running within manufacturer specifications.
Replaced draft combustion inducer assembly on HVAC heating unit. Upon installation of the new inducer motor, the unit produced an abnormal high-pitched squealing noise indicating a defective component. Submitted parts order for replacement motor and arranged return of faulty unit. Temporarily left the newly installed motor in operation to maintain heating capability, as the original motor was completely non-functional. Communicated issue and temporary solution to appropriate parties for follow-up service scheduling.
Completed preventive maintenance on a 30-year-old Trane XE90 furnace. System was found operating within normal parameters with heat exchanger in acceptable condition. Noted previous non-standard control board modification by unknown technician, though unit continues to function properly. Discussed equipment age and recommended considering system replacement due to advanced age of unit.
Responded to a washing machine standpipe backup in the basement. Located and cleared a grease plug at the 90-degree bend in the ground using main line cleaning equipment. Performed video camera inspection to verify complete clearance and confirm proper drainage flow.
Responded to scheduled furnace tune-up on a 9-year-old unit with no reported issues. During routine maintenance inspection, discovered a hole in the primary cell of the heat exchanger and documented the failure with camera inspection. Showed homeowner the compromised heat exchanger condition and explained the safety concern. Immediately tagged out the furnace and shut off gas supply to prevent potential carbon monoxide hazard. Verified remainder of furnace components tested within acceptable parameters. Coordinated with parts department to check heat exchanger warranty coverage and availability, and scheduled service advisor visit for the following morning to provide equipment replacement estimate.
Completed comprehensive furnace preventive maintenance and winter inspection on Lennox gas furnace system with Aprilaire humidifier. Performed standard tune-up procedures including combustion analysis, heat exchanger inspection, burner cleaning, blower assembly service, and filter replacement. Verified proper operation of all safety controls, ignition system, and venting. Inspected and serviced integrated Aprilaire humidifier, checked water supply line, and confirmed proper drainage through PVC condensate system. All components tested and found operating within manufacturer specifications with no deficiencies noted. System ready for heating season.
Completed scheduled front furnace tune-up and maintenance inspection on gas heating system. Performed comprehensive system evaluation including blower motor operation, electrical connections, burner assembly, and all safety controls. Inspected condensate drain line, ductwork connections, and verified proper venting. All components found operating within normal parameters with no deficiencies noted. System tested and confirmed functioning properly.
Removed deteriorated cast iron drain piping from 24 inches above floor level to the toilet riser and tied into the existing vertical stack. Replaced the bathtub drain line with new PVC piping, installed a new closet flange, and reset the toilet to proper working condition. All work included floor protection measures and replacement of the vertical drain stack to ensure proper drainage function.
Responded to water quality issues including murky water and film buildup in plumbing fixtures and toilet tanks. Removed malfunctioning acid neutralizer unit that was found in bypass mode, reconnected main water line directly, and thoroughly flushed all supply lines at basement bathroom sink to clear system of sediment and residual contamination.
Completed annual family rewards plumbing inspection of water heater and water softener system. Inspected dual Hague water softener tanks with digital control heads, verified proper operation of control valves and shut-off points, and checked salt levels in softener units. Examined PVC drainage system installation including main vertical drain pipe with rubber coupling connectors and associated branch lines. All plumbing components found to be functioning properly with no immediate service needs identified.
Completed routine maintenance inspection on Lennox furnace as part of recurring heating system agreement. Performed comprehensive tune-up and system evaluation, confirming all components operating within normal parameters with no deficiencies identified.
Responded to service call for malfunctioning toilet. Upon inspection, determined that both the intake valve and flush valve required replacement due to wear and operational failure. Successfully replaced the toilet fill valve (intake valve) with new assembly featuring red adjustment cap for proper water level control. Installed new flush valve assembly with yellow float mechanism to ensure reliable flushing performance. Tested both components for proper operation, verified water flow, checked for leaks, and confirmed flush cycle functionality. All internal tank mechanisms are now operating within manufacturer specifications.
Completed comprehensive tune-up on 7-year-old air conditioning unit and 11-year-old furnace system under maintenance agreement. Addressed heavily soiled condenser coil with significant debris accumulation including leaves, grass clippings, and organic matter; performed thorough coil cleaning to restore heat transfer efficiency. Replaced dirty air filter and performed duct cleaning to address buildup throughout ductwork system, improving airflow and indoor air quality.
Completed comprehensive annual tune-up on 2-year-old Lennox heating and cooling system per maintenance agreement. Performed full inspection of indoor furnace unit and outdoor condenser unit, identifying dirty condenser coil that was restricting airflow and reducing system efficiency. Thoroughly cleaned condenser coil to restore optimal heat transfer and system performance. All components inspected and system operating within manufacturer specifications upon completion.
Responded to no cooling complaint on air conditioning system. Upon inspection, found evaporator coil completely iced over due to severely restricted airflow. Identified return air filter as completely plugged with dust and debris, preventing proper air circulation across the coil. Instructed occupant to replace the dirty filter immediately and run system in fan-only mode for several hours to allow ice buildup to thaw completely before resuming cooling operation. Advised to monitor system performance and contact for follow-up if cooling issues persist after thaw cycle completes.
Completed comprehensive boiler maintenance and tune-up as part of membership agreement, which had been previously missed during last scheduled visit. Performed full system inspection, tested all heating zones with satisfactory results, and confirmed all equipment operating within normal parameters with no issues identified.
Responded to active water leak at duplex water treatment system. Upon inspection, identified leak originating from water softener drain port. Retightened drain port connection using channel locks until secure, successfully stopping the leak. Verified all connections were properly sealed and system was functioning normally before completing service.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.