Since 1959 Hurlburt, we make it our mission to keep your home comfortable and protected.

Heating calls in Eau Claire come with a wide mix of systems because the city has homes from nearly every era. Older neighborhoods like East Hill and Third Ward still have boiler systems, radiant heat, and homes that were never originally designed for central air. Meanwhile, many mid-century homes throughout Eau Claire still rely on aging forced-air furnaces that struggle to keep up during long Wisconsin winters.
We see a lot of airflow issues, aging heat exchangers, undersized ductwork, and systems that have simply reached the end of their lifespan. During sub-zero stretches, those problems become obvious fast.
Eau Claire summers can get surprisingly humid, especially near the Chippewa River and lower areas around Half Moon Lake. That humidity puts extra strain on older AC systems, particularly in homes that were not originally built with central air.
We work on a lot of mid-century homes where the ductwork was designed for heating first and cooling second. That often leads to uneven temperatures, weak airflow upstairs, and systems that cannot keep up during July heat waves.
Plumbing problems in Eau Claire often come down to age, freezing temperatures, and older infrastructure. Homes in older parts of the city can still have aging drain lines, outdated water piping, or plumbing systems that have been patched together over several decades.
During Wisconsin winters, frozen pipes and sump pump failures become common calls, especially during freeze-thaw cycles. We also see a steady demand for water softeners and water filtration systems throughout the Eau Claire area.
Older Eau Claire homes often have tight mechanical spaces and aging plumbing layouts that require experience to service properly.
If you are dealing with leaks, drain backups, or sump pump problems, we can help, call (715) 227-4145 today or connect with Hurlburt online to schedule service.
Electrical systems across Eau Claire vary just as much as the housing stock itself. Some older homes still operate on outdated panels that were never designed for modern electrical demand. We regularly see overloaded circuits, insufficient panel capacity, and aging wiring in homes built before the 1970s.
At the same time, newer neighborhoods are adding EV chargers, smart home systems, generators, and additional electrical loads that require upgraded infrastructure.
The dry winters and humid summers in Eau Claire create year-round indoor air quality challenges. During the winter, many homes become extremely dry once the furnace runs constantly. In the summer, excess humidity can leave the house feeling sticky even when the AC is operating.
A lot of homeowners also deal with dust buildup, pet dander, and poor airflow, especially in older homes with aging duct systems.
The right humidity and filtration setup can make a noticeable difference throughout the year. Call (715) 227-4145 today or connect with Hurlburt online to improve your comfort.
We are already working throughout Eau Claire every single day. This is not a secondary service market for us. It is where our company has operated for generations.
You have likely seen us at the Chippewa Valley Home Show, sponsoring the Fairfax Pool or Hobbs Ice Arena, or on WEAU 13 News during the Morning Connection segments where we share seasonal homeowner tips.
Hurlburt Heating & Plumbing has completed 20 jobs in Eau Claire, WI in August 2026.
The most recent job was on August 6, 2026.
Hurlburt Heating & Plumbing has completed 3,576 jobs in Eau Claire, WI in the last 12 months. The first job there was in October 2015.
Completed comprehensive AC tune-up and maintenance on Rheem outdoor unit. Replaced dirty air filter, verified evaporator coil was clean with proper drainage, and confirmed blower operation. Inspected outdoor unit components including capacitor and contactor which were both in good condition. Removed access panels, thoroughly cleaned outdoor unit, and performed operational testing with system running for 15 minutes. System performed optimally with 19-20 degree temperature split across the coil and no issues detected.
Completed comprehensive plumbing system inspection as part of recurring maintenance program. Evaluated water pressure at exterior connection point using calibrated gauge, confirming system operating within normal PSI parameters. Inspected interior copper piping installation, noting advanced corrosion and green patina formation on multiple sections indicating ongoing oxidation concerns that will require monitoring for potential future replacement.
Completed comprehensive plumbing inspection of residential property in preparation for upcoming countertop installation. Evaluated water supply system, including main shut-off valves, copper piping connections, pressure regulator, and water heater installation to ensure proper access and functionality for required water service interruption. Documented existing plumbing infrastructure, including A.O. Smith water heater with gas line connections, expansion tank, mixed copper and PEX supply lines, and main water distribution system to provide detailed assessment and estimate for coordinated shut-off service before countertop work and restoration of water service upon completion of installation.
Completed preventive maintenance on commercial Lennox rooftop unit including replacement of air filters and drive belt. Tested capacitors and fan motors with all components operating within normal parameters. Cleared condensate drain line and verified system cooling operation with no deficiencies noted. Left spare belt on site for future use.
Completed comprehensive tune-up on 13-year-old AC and furnace system. Performed full inspection of both units, finding all components within manufacturer specifications. Corrected improperly installed air filter that had been inserted backwards and replaced dirty filter and humidifier water panel. UV bulb inspected and confirmed in good working condition. Cleaned outdoor condenser unit and tested both heating and cooling operations for 15 minutes each with no issues detected. All routine maintenance items addressed and system operating efficiently.
Completed comprehensive air conditioning tune-up and maintenance on Goodman HVAC system located in mechanical closet. Performed full system inspection per maintenance agreement protocol, including evaluation of air handler unit, refrigerant lines, condensate drain system, and all associated components. All systems operating within normal parameters with no deficiencies noted at time of service.
Responded to clogged kitchen sink complaint. Upon inspection, identified blockage caused by accumulation of grease and egg shells in the drain line. Accessed plumbing system beneath sink, which included chrome drain basket, white PVC P-trap assembly, and garbage disposal unit with associated drainage components. Utilized rigid cable machine to clear obstruction from drain line, successfully restoring proper flow and drainage function. Documented existing cabinet conditions including water staining on cabinet floor and plumbing configuration. All drain components tested and verified operational upon completion of cleaning procedure.
Completed comprehensive seasonal tuneup on 3-year-old Lennox HVAC system including both air conditioning condenser unit and furnace with air handler. Performed full inspection, cleaning, and testing of all components per manufacturer specifications. System operating efficiently with no issues identified during service visit.
Returned to property following previous pipe replacement work to complete drain cleaning and camera inspection. Milled remaining pipe sections to remove buildup and obstructions, then performed video camera inspection of the sewer line to assess overall condition and determine if liner installation would be necessary. All drainage issues were successfully resolved through mechanical cleaning and milling procedures.
Responded to service call for water leaking from furnace. Upon inspection, found the condensate pump had been displaced from its proper position beneath the furnace and evaporator coil drain. Repositioned the condensate pump to correct location under the drainage point and verified proper alignment with drain lines. Cycled the HVAC system through complete operation to test condensate drainage function. Confirmed all condensate was draining properly into the pump and being discharged correctly. Noted the condensate pump is beginning to show signs of wear with audible noise during operation, which may require future attention. System restored to normal operation with no active leaks present at time of departure.
Responded to no cooling complaint on 10+ year old R22 system. Replaced heavily plugged air filter restricting airflow. Removed mouse nest from outdoor condensing unit. Performed system diagnostics and found unit low on R22 refrigerant, indicating refrigerant leak. Observed aging electrical connections showing signs of deterioration at electrical panel. Documented findings with photos of electrical panel and manifold gauge readings. Recommended leak search and repair estimates, electrical connection repair estimates, and system replacement pricing for comparison. Scheduled follow-up appointment with advisor to review repair options and replacement proposals.
Responded to no-cooling call on 8-year-old system originally installed by our company. Diagnosed older style magnetic mount S3 thermostat failure to connect to smart hub, preventing system operation. Replaced failed thermostat with new Lennox S40 unit, restoring full system functionality and smart connectivity. Performed thorough cleaning of outdoor condensing unit and tested all equipment through S40 interface to verify proper operation. Enrolled homeowner in basic maintenance plan for ongoing system care.
Responded to low water pressure complaint in bathroom faucet previously installed in June. Upon inspection, determined pressure was reduced in both hot and cold water lines. Removed feed lines and tested pressure at shut-off valves, confirming adequate supply pressure from main system. Reattached cold feed line and performed backflushing procedure on faucet to clear debris buildup from aerator, which had accumulated due to infrequent use during move-in period. Water pressure fully restored after backflushing. Ran faucet for extended period to ensure complete clearing of debris and verify proper flow restoration. Conducted water quality testing, measuring 0 grains per gallon hardness, 164 total dissolved solids, and reverse osmosis system output at 18 total dissolved solids.
Responded to service call for water leaking from furnace unit. Upon arrival, discovered water leaking from above the furnace and traced source to evaporator coil with drain pan at full capacity. Inspection revealed evaporator drain line was completely blocked with accumulated debris, preventing proper drainage. Cleared blockage by blowing out built-up debris from evaporator drain line, restoring proper drainage function. Verified system operation by testing air conditioning unit, checked refrigerant pressures which were within normal range, and confirmed approximately 15-degree temperature differential across evaporator coil. System returned to normal operation with no further leaking observed.
Responded to a slow water leak located under the kitchen sink. Upon inspection, identified a faulty compression angle stop valve on the hot water line that was causing visible corrosion on the copper piping. Replaced the defective angle stop valve and removed and reinstalled the affected section of copper pipe to eliminate the leak and prevent further corrosion damage to the plumbing system.
Conducted comprehensive site assessment of duplex property focusing on basement utility infrastructure and existing plumbing systems. Evaluated basement area for feasibility of adding washer/dryer hookups, inspecting existing water supply lines, drainage capabilities, and structural considerations for new appliance installation. Assessed current sump pump system and identified requirements for replacement or upgrade to ensure proper basement water management. Documented existing electrical panel capacity and evaluated garage location for potential 200-amp service upgrade with subpanel installation to support additional electrical loads. Photographed exposed plumbing infrastructure including PVC drainage lines, water supply piping, and existing utility routing through floor joists and wall framing. Noted deteriorated conditions in basement including water-damaged structural elements, aging pipes, and multiple layers of previous modifications requiring consideration during renovation pla
Completed comprehensive plumbing inspection of residential property with focus on aging water supply lines and drain systems. Documented extensive corrosion on vertical black iron drain pipe assembly and copper supply lines in utility area, noting visible rust on metal fittings and deterioration at connection points. Identified corroded trap assembly beneath floor with significant green patina indicating advanced oxidation of brass/copper components, along with evidence of moisture exposure and water staining on surrounding wood subflooring at pipe penetration points. Mixed plumbing materials observed throughout system including older metal components and newer white PVC sections connected via adapters, suggesting previous repair attempts. Provided detailed photographic documentation of all corroded components, leaking water lines, and areas requiring immediate attention. Prepared comprehensive estimate for necessary repairs to address active water line leaks and recommend replacement
Responded to a water leak emergency in the laundry room where a washing machine supply line was missing a washer, resulting in significant water damage behind the appliance. Shut off the washing machine isolation valves and installed two caps on the supply line outlets to secure the water connections. Coordinated with water damage restoration contractor who will be handling drywall removal and remediation of the affected areas.
Completed Family Rewards Program air conditioning tune-up and maintenance visit. Replaced air filter and performed comprehensive system inspection, finding all indoor components clean and within manufacturer specifications. Outdoor unit required thorough cleaning; all electrical connections and components tested and verified operational. System operated successfully during 15-minute test run with temperature differential exceeding 20 degrees, confirming proper cooling performance.
Responded to service call for kitchen sink faucet with low water pressure and slow stream. Upon inspection, identified sediment buildup in the aerator filter of the pull-down sprayer assembly. Removed, cleaned, and cleared the filter screen of debris, restoring full water pressure and flow to the faucet.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.