Since 1959 Hurlburt, we make it our mission to keep your home comfortable and protected.

Heating calls in Eau Claire come with a wide mix of systems because the city has homes from nearly every era. Older neighborhoods like East Hill and Third Ward still have boiler systems, radiant heat, and homes that were never originally designed for central air. Meanwhile, many mid-century homes throughout Eau Claire still rely on aging forced-air furnaces that struggle to keep up during long Wisconsin winters.
We see a lot of airflow issues, aging heat exchangers, undersized ductwork, and systems that have simply reached the end of their lifespan. During sub-zero stretches, those problems become obvious fast.
Eau Claire summers can get surprisingly humid, especially near the Chippewa River and lower areas around Half Moon Lake. That humidity puts extra strain on older AC systems, particularly in homes that were not originally built with central air.
We work on a lot of mid-century homes where the ductwork was designed for heating first and cooling second. That often leads to uneven temperatures, weak airflow upstairs, and systems that cannot keep up during July heat waves.
Plumbing problems in Eau Claire often come down to age, freezing temperatures, and older infrastructure. Homes in older parts of the city can still have aging drain lines, outdated water piping, or plumbing systems that have been patched together over several decades.
During Wisconsin winters, frozen pipes and sump pump failures become common calls, especially during freeze-thaw cycles. We also see a steady demand for water softeners and water filtration systems throughout the Eau Claire area.
Older Eau Claire homes often have tight mechanical spaces and aging plumbing layouts that require experience to service properly.
If you are dealing with leaks, drain backups, or sump pump problems, we can help, call (715) 227-4145 today or connect with Hurlburt online to schedule service.
Electrical systems across Eau Claire vary just as much as the housing stock itself. Some older homes still operate on outdated panels that were never designed for modern electrical demand. We regularly see overloaded circuits, insufficient panel capacity, and aging wiring in homes built before the 1970s.
At the same time, newer neighborhoods are adding EV chargers, smart home systems, generators, and additional electrical loads that require upgraded infrastructure.
The dry winters and humid summers in Eau Claire create year-round indoor air quality challenges. During the winter, many homes become extremely dry once the furnace runs constantly. In the summer, excess humidity can leave the house feeling sticky even when the AC is operating.
A lot of homeowners also deal with dust buildup, pet dander, and poor airflow, especially in older homes with aging duct systems.
The right humidity and filtration setup can make a noticeable difference throughout the year. Call (715) 227-4145 today or connect with Hurlburt online to improve your comfort.
We are already working throughout Eau Claire every single day. This is not a secondary service market for us. It is where our company has operated for generations.
You have likely seen us at the Chippewa Valley Home Show, sponsoring the Fairfax Pool or Hobbs Ice Arena, or on WEAU 13 News during the Morning Connection segments where we share seasonal homeowner tips.
Hurlburt Heating & Plumbing has completed 20 jobs in Eau Claire, WI in September 2026.
The most recent job was on September 8, 2026.
Hurlburt Heating & Plumbing has completed 3,599 jobs in Eau Claire, WI in the last 12 months. The first job there was in October 2015.
Responded to no cooling complaint on 9-year-old air conditioning system. Diagnosed failed capacitor preventing compressor operation. Replaced defective capacitor with proper OEM replacement and verified electrical specifications. Performed condenser coil cleaning by running 110 feet of hose to unit location and thoroughly washing exterior coil to remove dirt and debris buildup. System tested after repairs, confirmed proper amp draw, and verified cooling operation restored to normal parameters.
Installed customer-supplied widespread faucet with brushed nickel finish on bathroom vanity with undermount sink. Removed existing faucet assembly, prepared mounting surface, and installed new three-piece faucet set including central spout and dual lever handles. Verified proper water flow, checked for leaks, and ensured all connections were secure and functioning correctly.
Completed bathroom plumbing installation including sink hookup, shower trim installation, and toilet leak inspection. Installed new ice maker water supply line with proper copper piping and connections. All fixtures tested for proper operation and verified leak-free connections throughout the bathroom and kitchen areas.
Responded to no cooling complaint on 20+ year old Bryant HVAC system. Found condenser unit humming but not operating, diagnosed failed capacitor reading zero microfarads. Customer declined repair as system replacement quotes had previously been provided and they did not wish to invest in temporary repairs on aging equipment.
Responded to emergency plumbing call for active leak at bathtub drain assembly requiring immediate attention. Upon arrival, found customer using bucket to collect water from failing tub waste and overflow system. Performed complete replacement of tub waste and overflow assembly per approved estimate. Removed existing deteriorated drain components showing significant mineral buildup and corrosion around drain opening. Installed new standard tub waste and overflow assembly, ensuring proper seal and alignment. Tested system for leaks and verified proper drainage function. Emergency repair completed successfully, eliminating active water leak.
Responded to no-cooling complaint on 15-year-old system with outdoor fan running but no indoor cooling. Diagnosed and replaced failed 30/5 µF dual-run capacitor reading 0 µF, restoring air conditioning operation. Verified R-22 refrigerant charge operating within proper parameters. Performed furnace inspection revealing loose PVC vent elbow collar; resecured and glued connection to prevent exhaust leakage. Removed accumulated powder residue from inducer housing area and inspected heat exchanger and collector box for cracks—none found. Confirmed furnace heating operation functioning properly. Advised that both the 2005 air conditioning unit and 2010 Tempstar furnace are nearing end of expected service life and should be monitored closely for future reliability concerns.
Responded to sewage backup in basement main drain with simultaneous loss of water pressure throughout the house. Upon arrival, found upstairs fixtures operational but compromised pressure to remaining plumbing system. Performed video camera inspection of the main sewer line through cleanout access point. Camera inspection revealed no obstructions, root intrusion, or structural defects within the visible pipe system. Documented findings with photographic evidence of the main line cleanout installation and surrounding plumbing infrastructure.
Completed recurring plumbing and HVAC inspection for multi-family property. Evaluated bathroom plumbing fixtures including chrome-plated tub diverter valve and shower components, noting overall good condition with minor wear on chrome finish. Inspected outdoor air conditioning unit, electrical disconnect, refrigerant lines, and PVC condensate drain system with P-trap configuration. Documented findings with photographs and provided written notes and estimates for any recommended repairs or maintenance items identified during inspection.
Responded to report of concealed water leak within bathroom wall. Upon investigation, identified multiple pinhole leaks in copper piping located in the wall cavity between shower and kitchen. Cut access openings on both bathroom and kitchen sides of the wall to expose the compromised plumbing. Removed and replaced the deteriorated pipe sections with new materials. Extensive water damage was evident on wall structure and bathroom flooring from the prolonged leak. Coordinated follow-up services for bathroom remodeling to address structural damage and water treatment system installation to prevent future corrosion issues.
Responded to service call for reported water heater making unusual sounds and lack of hot water. Upon inspection of the Bradford White tanked water heater unit, determined the water heater itself was functioning properly with no leaks or mechanical issues present. Investigation revealed the actual source of concern was a failed condensate pump on the adjacent furnace system, which was leaking water in the mechanical room. Removed the old malfunctioning condensate pump and installed a new replacement unit to restore proper HVAC condensate drainage and eliminate the water leak.
Responded to no cooling complaint on recently installed residential air conditioning system. Upon inspection, discovered blower speed was left on factory default maximum setting, which was causing inadequate dehumidification and poor cooling performance during humid conditions. Adjusted blower speed from maximum to medium setting to optimize airflow and system efficiency. Verified refrigerant pressures and system operating parameters using digital manifold gauges, confirming proper charge and temperatures. Monitored system operation after adjustment to ensure proper cooling cycle and adequate temperature differential. Unit now operating within manufacturer specifications with improved comfort and humidity control.
Performed comprehensive cleaning of ductless mini-split indoor unit. Removed and thoroughly cleaned blower wheel to restore proper airflow and eliminate accumulated debris. Cleaned blower motor and additional internal components of the air handler head unit. System tested and confirmed operational upon completion.
Responded to callback for 4-year-old residential AC system with no cooling and intermittent loud screeching noise. Upon arrival, discovered system would not power on due to burned wire at condenser unit. Repaired damaged electrical connection and restored power to unit. Conducted operational testing and monitored system performance while investigating previously reported squealing noise that occurs during shutdown and idle periods. Observed system experiencing pressure equalization issues when compressor cycles off, indicating potential thermostatic expansion valve malfunction. Verified amperage draw at 6.33A during operation. System currently operational but requires TXV replacement to resolve pressure equalization concern and eliminate screeching noise during shutdown cycles.
Responded to no cooling complaint on recently installed RUUD system with non-operational blower motor. Upon inspection, discovered loose wiring connections to blower motor inside junction box. Secured and tightened all electrical connections at blower motor wiring box, restored proper contact, and cycled system through complete operational test to verify airflow and cooling function restored to normal parameters.
Responded to no cooling complaint on aging residential air conditioning system. Upon inspection, found evaporator coil beginning to freeze during operation, indicating low refrigerant charge. Added 1 lb of R-410A refrigerant to system and verified proper operation before departure.
Completed generator installation including electrical service panel integration and outdoor equipment setup. Installed transfer switch panel with main circuit breaker, dual branch breakers, and surge protection device with proper wire routing and conduit connections. Connected generator unit to gas supply line via meter, completed all electrical terminations, and verified system operational status.
Completed annual preventative maintenance on both air conditioning and furnace systems, each approximately one year old. Performed comprehensive tune-up procedures including cleaning of routine components on both the outdoor Lennox AC unit and indoor furnace system. Conducted operational testing of all equipment, verified system performance parameters, and confirmed proper functioning of all mechanical and electrical components.
Installed bidet toilet with new dedicated electrical outlet in bathroom with challenging access conditions. Successfully fished electrical wire through shared wall to power bidet unit, as no basement access or adjacent outlets were available on opposite side. Completed outlet installation with cover plates and verified all plumbing connections and electrical functionality.
Completed comprehensive plumbing inspection of residential property, including evaluation of water pressure tank, associated piping systems, and bathroom fixtures. Successfully removed and replaced faulty Moen shower cartridge to restore proper water flow and temperature control. Inspected basement mechanical room components, noting moisture condensation on copper supply lines and verifying pressure tank operation and connections.
Responded to warranty call for constant knocking noise from Lennox condensing unit while running. Upon inspection, discovered deceased rodent and biological debris around condenser fan blades and inside unit housing. Removed condenser fan assembly, extracted rodent remains, and cleaned affected components. Reassembled unit, verified normal operation with no abnormal noise present and system cooling properly.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.