Since 1959 Hurlburt, we make it our mission to keep your home comfortable and protected.

Heating calls in Eau Claire come with a wide mix of systems because the city has homes from nearly every era. Older neighborhoods like East Hill and Third Ward still have boiler systems, radiant heat, and homes that were never originally designed for central air. Meanwhile, many mid-century homes throughout Eau Claire still rely on aging forced-air furnaces that struggle to keep up during long Wisconsin winters.
We see a lot of airflow issues, aging heat exchangers, undersized ductwork, and systems that have simply reached the end of their lifespan. During sub-zero stretches, those problems become obvious fast.
Eau Claire summers can get surprisingly humid, especially near the Chippewa River and lower areas around Half Moon Lake. That humidity puts extra strain on older AC systems, particularly in homes that were not originally built with central air.
We work on a lot of mid-century homes where the ductwork was designed for heating first and cooling second. That often leads to uneven temperatures, weak airflow upstairs, and systems that cannot keep up during July heat waves.
Plumbing problems in Eau Claire often come down to age, freezing temperatures, and older infrastructure. Homes in older parts of the city can still have aging drain lines, outdated water piping, or plumbing systems that have been patched together over several decades.
During Wisconsin winters, frozen pipes and sump pump failures become common calls, especially during freeze-thaw cycles. We also see a steady demand for water softeners and water filtration systems throughout the Eau Claire area.
Older Eau Claire homes often have tight mechanical spaces and aging plumbing layouts that require experience to service properly.
If you are dealing with leaks, drain backups, or sump pump problems, we can help, call (715) 227-4145 today or connect with Hurlburt online to schedule service.
Electrical systems across Eau Claire vary just as much as the housing stock itself. Some older homes still operate on outdated panels that were never designed for modern electrical demand. We regularly see overloaded circuits, insufficient panel capacity, and aging wiring in homes built before the 1970s.
At the same time, newer neighborhoods are adding EV chargers, smart home systems, generators, and additional electrical loads that require upgraded infrastructure.
The dry winters and humid summers in Eau Claire create year-round indoor air quality challenges. During the winter, many homes become extremely dry once the furnace runs constantly. In the summer, excess humidity can leave the house feeling sticky even when the AC is operating.
A lot of homeowners also deal with dust buildup, pet dander, and poor airflow, especially in older homes with aging duct systems.
The right humidity and filtration setup can make a noticeable difference throughout the year. Call (715) 227-4145 today or connect with Hurlburt online to improve your comfort.
We are already working throughout Eau Claire every single day. This is not a secondary service market for us. It is where our company has operated for generations.
You have likely seen us at the Chippewa Valley Home Show, sponsoring the Fairfax Pool or Hobbs Ice Arena, or on WEAU 13 News during the Morning Connection segments where we share seasonal homeowner tips.
Hurlburt Heating & Plumbing has completed 20 jobs in Eau Claire, WI in September 2026.
The most recent job was on September 22, 2026.
Hurlburt Heating & Plumbing has completed 3,564 jobs in Eau Claire, WI in the last 12 months. The first job there was in October 2015.
Performed maintenance on a 1997 Heil Blue Stripe furnace and discovered multiple horizontal and vertical cracks in the primary heat-exchanger cells adjacent to the eyelets, which were documented via video camera. Inspection revealed a brittle and deteriorated control board, and the 10 µF run capacitor measured at 8.004 µF, indicating failure. An estimate was prepared for necessary repairs, and replacement furnace options will be provided.
Responded to basement flooding caused by water softener system drainage issue. Upon inspection, determined that the drain line was unable to handle simultaneous regeneration cycles from multiple water treatment units, resulting in drain overflow and water accumulation in the basement. Resolved the issue by reprogramming and staggering the regeneration run times of the water softener units to prevent overlap, ensuring only one unit drains at a time and eliminating the flooding condition.
Diagnosed a dripping single-handle kitchen faucet and identified a failed cartridge as the source of the leak. Submitted parts order for replacement cartridge as compatible unit was not available locally; scheduled follow-up appointment to complete cartridge installation upon parts arrival.
Completed comprehensive repair and maintenance service including replacement of three contactors across multiple geothermal units—two package geo units and one water-to-water unit. Replaced steam humidifier canister and verified proper operation of the humidification system. Performed full maintenance service on Ultra boiler system, completing all tasks per the approved estimate.
# Emergency Water Leak Repair - Well Tank System Responded to emergency call for active water leak in basement utility area. Upon arrival, found significant flooding with water accumulation across concrete floor. Customer was unable to identify leak source or water shut-off location. ## Problem Identified Conducted thorough inspection of plumbing system and identified failed adapter connection on Well-Rite pressure tank (Tank T). The broken adapter was causing uncontrolled water discharge, resulting in basement flooding with water levels reaching several inches deep. ## Work Performed - Located and shut off water supply to isolate affected system - Assessed extent of flooding and leak damage to utility room - Removed failed adapter component from pressure tank - Installed new replacement adapter on Tank T - Reconnected all associated copper piping and fittings to pressure tank system - Restored water supply and tested system for proper operation - Verified all connections were sec
Performed annual boiler maintenance on approximately one-year-old unit. Cleaned routine components, bled radiators to remove air from system, and flushed drain lines. Tested all equipment operation and confirmed system is heating properly with no issues detected.
Responded to no-heat call on 32-year-old Carrier Weathermaker 9200 furnace that was not turning on and displaying error codes. Diagnosed failed control board and compromised heat exchanger. Replaced both the control board and heat exchanger to restore system operation and recommended comfort advisor consultation for system replacement options given the age and condition of the unit.
Responded to basement flooding issue originating from clothes washer drainage system. Upon arrival, found extensive standing water throughout laundry area with significant pooling around floor drain. Initial assessment confirmed floor drain was not draining properly following washing machine use. Conducted thorough inspection of drainage system and identified root cause as multiple breaks in underground drainage piping. The compromised pipe sections were preventing proper water flow and causing backflow into the basement through the floor drain. Documented water damage extent with photographic evidence showing widespread flooding across concrete floor surface. Due to the severity of underground pipe damage requiring excavation and replacement, coordinated follow-up estimate appointment for comprehensive repair scope including pipe replacement and restoration work.
Responded to a water leak complaint originating from the upstairs bathroom with water pooling in the basement. Upon inspection, identified a cracked clean-out tee fitting on the basement drain pipe as the source of the leak. Cut out the damaged clean-out tee and installed a new replacement fitting to restore proper drainage function and eliminate the water intrusion. Documented the deteriorated condition of the original component, which showed significant cracking and surface degradation, and verified the new installation was secure and leak-free.
Coordinated and completed required inspections for new HVAC installation, including pressure testing with EC inspector and gas testing with city inspector. Cut in and installed new grille in ductwork system. Gas affidavit was submitted to utility company, with gas meter installation scheduled for Monday at 1:30 PM; furnace commissioning will be completed following meter activation.
Completed scheduled furnace preventive maintenance and tune-up on a 26-year-old Goodman heating system. Performed thorough cleaning and inspection of all routine components, verified proper operation, and documented equipment condition with photographs.
Responded to service call for two toilets experiencing continuous running issues. Upon inspection, first toilet exhibited a torn flapper causing constant water flow, which was replaced to restore proper function. Second toilet was not actively running during visit; however, inspection revealed deteriorating styrofoam insulation inside tank creating debris that likely interfered with flapper seal intermittently. Due to age-related tank deterioration and potential for recurring problems, provided estimate for complete toilet replacement on second unit.
Completed comprehensive preventive maintenance on 3-year-old Lennox furnace and air conditioning system. Performed routine inspection and cleaning of all components including filters, blower assembly, condensate drain lines, electrical connections, and gas line connections. All systems tested and operating within manufacturer specifications with no issues identified.
Responded to service call for clogged bathroom sink drain in basement. Successfully cleared obstruction by running plumbing snake through drain line, restoring proper water flow and drainage function.
Responded to service call for furnace not heating on 15-year-old system. Upon inspection, found pilot light extinguished and successfully re-lit. Tested furnace operation and confirmed heating functionality restored. Conducted thorough inspection of heat exchanger due to age of unit and discovered heat exchanger baffle had rusted completely off and was resting dangerously close to burner assembly, creating an unsafe operating condition. Documented findings with photographs showing deteriorated components and damage. Explained safety concerns to homeowner regarding failed heat exchanger baffle and potential carbon monoxide hazards. Coordinated with service advisor for replacement system quote due to severity of heat exchanger failure and age of equipment making repair inadvisable.
Performed second opinion inspection on existing HTP boiler system after homeowner received recommendation from another contractor to replace heat exchanger and control board. Conducted thorough visual assessment of boiler unit, expansion tank, circulation pumps, piping connections, and electrical controls. Documented current system condition with photographs and coordinated with sales advisor to provide replacement equipment estimate for comparison purposes.
Responded to service call for clogged dishwasher discharge line and garbage disposal drain. Upon arrival, performed thorough testing by running water through both the disposal and dishwasher drain lines for several minutes. All drainage systems functioned properly with no signs of blockage or slow drainage. Issue had self-resolved prior to technician arrival, with all plumbing components operating as expected.
Responded to basement toilet leak caused by failed wax ring flange seal. Removed and reset toilet with new wax ring seal to eliminate water leakage at base. Additionally replaced freeze-damaged exterior hose bibb (sillcock) that had sustained cold weather damage. Installed new toilet fixture to complete the repair. All plumbing connections tested and verified leak-free upon completion.
Completed scheduled heating and cooling maintenance on 4-year-old Lennox furnace and air conditioning system under maintenance agreement. Performed comprehensive tune-up including inspection of all mechanical and electrical components, control board verification, and system operational testing. Inspected air filter which showed moderate dust and dirt accumulation in pleated media; documented current condition. Verified all wiring connections, relays, and capacitors on control board functioning properly. No issues or deficiencies identified during inspection; system operating within normal parameters with no problems reported by customer.
Replaced defective control board under manufacturer part warranty on furnace system. Upon arrival, found inducer motor running continuously with power applied to unit. Installed new control board which initially resolved the continuous inducer operation. Post-installation testing revealed multiple secondary issues: blower motor not operating, furnace not firing, and air conditioning only responding to heat calls at thermostat. Diagnosed thermostat wiring issue with conductors improperly terminated and loose at both thermostat and furnace connection points. Re-terminated and secured all low-voltage thermostat wiring at both locations. Verified proper 24-volt signal from thermostat for heating, cooling, and fan operation modes. Further troubleshooting confirmed blower motor failure despite receiving proper 24-volt call signal and new control board sending correct 120-volt output to motor. Documented findings and provided estimate for blower motor replacement. Original control board lef
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.