Since 1959 Hurlburt, we make it our mission to keep your home comfortable and protected.

Heating calls in Eau Claire come with a wide mix of systems because the city has homes from nearly every era. Older neighborhoods like East Hill and Third Ward still have boiler systems, radiant heat, and homes that were never originally designed for central air. Meanwhile, many mid-century homes throughout Eau Claire still rely on aging forced-air furnaces that struggle to keep up during long Wisconsin winters.
We see a lot of airflow issues, aging heat exchangers, undersized ductwork, and systems that have simply reached the end of their lifespan. During sub-zero stretches, those problems become obvious fast.
Eau Claire summers can get surprisingly humid, especially near the Chippewa River and lower areas around Half Moon Lake. That humidity puts extra strain on older AC systems, particularly in homes that were not originally built with central air.
We work on a lot of mid-century homes where the ductwork was designed for heating first and cooling second. That often leads to uneven temperatures, weak airflow upstairs, and systems that cannot keep up during July heat waves.
Plumbing problems in Eau Claire often come down to age, freezing temperatures, and older infrastructure. Homes in older parts of the city can still have aging drain lines, outdated water piping, or plumbing systems that have been patched together over several decades.
During Wisconsin winters, frozen pipes and sump pump failures become common calls, especially during freeze-thaw cycles. We also see a steady demand for water softeners and water filtration systems throughout the Eau Claire area.
Older Eau Claire homes often have tight mechanical spaces and aging plumbing layouts that require experience to service properly.
If you are dealing with leaks, drain backups, or sump pump problems, we can help, call (715) 227-4145 today or connect with Hurlburt online to schedule service.
Electrical systems across Eau Claire vary just as much as the housing stock itself. Some older homes still operate on outdated panels that were never designed for modern electrical demand. We regularly see overloaded circuits, insufficient panel capacity, and aging wiring in homes built before the 1970s.
At the same time, newer neighborhoods are adding EV chargers, smart home systems, generators, and additional electrical loads that require upgraded infrastructure.
The dry winters and humid summers in Eau Claire create year-round indoor air quality challenges. During the winter, many homes become extremely dry once the furnace runs constantly. In the summer, excess humidity can leave the house feeling sticky even when the AC is operating.
A lot of homeowners also deal with dust buildup, pet dander, and poor airflow, especially in older homes with aging duct systems.
The right humidity and filtration setup can make a noticeable difference throughout the year. Call (715) 227-4145 today or connect with Hurlburt online to improve your comfort.
We are already working throughout Eau Claire every single day. This is not a secondary service market for us. It is where our company has operated for generations.
You have likely seen us at the Chippewa Valley Home Show, sponsoring the Fairfax Pool or Hobbs Ice Arena, or on WEAU 13 News during the Morning Connection segments where we share seasonal homeowner tips.
Hurlburt Heating & Plumbing has completed 20 jobs in Eau Claire, WI in September 2026.
The most recent job was on September 28, 2026.
Hurlburt Heating & Plumbing has completed 3,564 jobs in Eau Claire, WI in the last 12 months. The first job there was in October 2015.
Completed comprehensive furnace tune-up and maintenance per agreement protocol. Addressed thermostat issues related to battery replacement and verified proper operation. Performed full system inspection revealing significant condensation and frost accumulation on ductwork and evaporator coil, indicating potential insulation deficiencies or temperature differential concerns that should be monitored. All tune-up procedures documented on standard maintenance form.
Responded to no hot water complaint on a recently installed water heater (4 months old). Performed comprehensive diagnostic testing on the unit, including evaluation of both heating elements and thermostats. All components tested within normal operating parameters and functioned properly, with no defects or failures identified.
Responded to service call for multiple plumbing issues including toilet leak, basement ceiling water damage, and dripping tub drain. Replaced wax seal on toilet to eliminate leak at floor connection. Installed two new shut-off valves on toilets to ensure proper water control and prevent future leaks. Repaired tub drain to stop dripping issue. Upon inspection of basement ceiling tiles, identified source of water intrusion from bathroom plumbing above. All fixtures tested for proper operation and verified leak-free after repairs completed.
Responded to water staining around upstairs toilet. Upon inspection, flushed toilet multiple times to verify leak source was not at the base. Identified active leaks at both the supply line and angle stop valve. Removed existing SharkBite angle stop and installed a standard PEX angle stop. Replaced the toilet supply line with new braided stainless steel flexible connector. Verified all connections were secure and leak-free upon completion.
Responded to service call for toilet that runs constantly after flushing, requiring manual adjustment of float to stop water flow. Upon inspection, found toilet continuously leaking water into bowl due to malfunctioning flush mechanism. Internal tank components showed significant mineral buildup and calcium deposits on fill valve assembly, with visible hard water staining throughout tank interior. Adjusted float level to temporarily reduce water flow and leakage. Due to extent of mineral deposits, age-related deterioration of internal components, and compromised flush valve operation, provided estimate options for complete toilet replacement or full internal mechanism rebuild to restore proper function and eliminate continuous running condition.
Responded to no hot water call for commercial tanked water heater. Upon arrival, inspected unit and confirmed lack of hot water production. Identified active leak at water heater with water intrusion in flame sensor area, compromising safe operation of the unit. Due to age of equipment, extent of water damage to internal components, and potential safety concerns with flame sensor contamination, provided estimate for complete water heater replacement rather than repair.
Responded to commercial water leak in main mechanical room serving three large water heaters. Upon arrival, found active leak on 1.5"-2" copper main line with insulation compromised and standing water throughout the floor area. Facility was closed at time of service, requiring coordination for building access. Identified corroded section of copper piping as source of leak, with visible oxidation and deterioration at failure point. Isolated affected section, cut out damaged copper pipe, and installed new copper section with proper fittings and connections. Tested system for proper operation and verified leak was eliminated. Noted early-stage mold growth present due to prolonged moisture exposure in mechanical room.
Completed comprehensive furnace tune-up on 2-year-old Lennox unit. Cleaned flame sensor, performed full electrical testing with all readings within manufacturer specifications, verified temperature drop across heat exchanger, and confirmed proper system operation. Customer's filter was recently replaced and in excellent condition.
Responded to customer concern regarding carbon monoxide safety after neighboring property had furnace issues. Performed comprehensive furnace inspection and discovered inducer assembly completely filled with water. Found one mounting screw severely corroded and snapped off. Observed extensive rust accumulation beneath inducer assembly and on burner components. Conducted heat exchanger scope inspection which revealed multiple breach points indicating heat exchanger failure. Due to severity of findings and carbon monoxide risk, immediately shut down furnace for safety. Disconnected inducer motor, unplugged igniter, and closed gas valve at appliance and main gas shutoff. Left blower operational to maintain air circulation capability for comfort. Provided repair estimates and scheduled appointment for replacement system consultation. Additionally inspected air conditioning system which showed normal operating condition with no concerns noted. Enrolled customer in annual maintenance progr
Completed scheduled heating maintenance agreement service including comprehensive inspection of furnace and boiler system. Performed full diagnostic testing on furnace with all components verified to be operating within manufacturer specifications. Conducted thorough evaluation of boiler system including testing all three heating zones and domestic hot water production. Confirmed proper firing sequence and verified boiler operating at 100% capacity. Inspected boiler vent piping with camera scope to ensure clear pathways following homeowner's removal of bird nest obstruction. All system components, safety controls, and zone valves functioning properly with no deficiencies noted.
Completed comprehensive heating tune-ups on two residential furnace systems. Performed thorough inspections of both units including blower assemblies, heat exchangers, and all operational components. Both furnaces tested and confirmed to be operating within normal parameters with no deficiencies noted.
Completed scheduled heating maintenance visit on 2009 gas furnace unit as part of recurring preventive maintenance agreement. Performed comprehensive heating tune-up including inspection of blower assembly, which showed accumulated dust and debris around centrifugal fan hub and blades, burner components, heat exchanger, gas valve connections, electrical controls, and venting system. All systems tested and operating within normal parameters with no deficiencies requiring correction at this time.
Completed scheduled heating maintenance on 7-year-old Lennox HVAC system as part of maintenance agreement. Performed comprehensive system inspection, tested electrical components using diagnostic meter, verified all connections and ductwork integrity, and ensured proper operation of heating equipment. System found to be safe and ready for winter operation with no additional issues identified.
Responded to a water leak complaint at a residential property where a toilet had been recently installed. Upon inspection, identified the source of the leak as a faulty compression-style supply stop valve at the toilet water supply connection point. Removed the defective compression supply stop and replaced it with a new PEX angle stop valve. Verified proper connection at the compression fitting to the supply line and confirmed the valve operated correctly with no leaks present. Tested the system under full water pressure and inspected the surrounding floor area to ensure the leak was completely resolved. The new angle stop valve was secured to the floor-mounted water supply line with a chrome escutcheon plate covering the floor penetration. All connections were tightened to manufacturer specifications and the installation was completed on white hexagonal tile flooring at the base of the toilet fixture.
Completed comprehensive furnace tune-up and maintenance inspection. Tested all system operations with temperature rise confirmed within manufacturer specifications. Replaced air filter, verified gas pressure levels, and inspected flame sensor and igniter for proper function. Cleaned blower compartment and performed thorough heat exchanger inspection. Cleared condensate drain line and trap to ensure proper drainage. Identified moisture dripping from intake pipe onto gas valve and recommended installation of intake drain kit per manufacturer specifications to prevent future issues. All system components operating correctly at time of service.
Performed comprehensive heating maintenance on a 7-year-old boiler system. Conducted thorough inspection of all boiler components, piping connections, expansion tank, circulator pumps, and safety controls. System found to be operating properly with no issues identified during the heating check.
Completed scheduled heating maintenance as part of annual agreement. Performed comprehensive furnace inspection including temperature rise verification, gas pressure testing, and blower compartment examination. Replaced air filter, cleared condensate drain and trap, verified pressure switch ports, and cleaned flame sensor and igniter. All system components tested and confirmed operating within normal parameters.
Completed preventive maintenance tune-up on 4-year-old Lennox furnace operating under maintenance agreement. Performed comprehensive heating system inspection with no deficiencies identified, replaced air filter and thermostat batteries, and confirmed system operating within normal parameters.
Performed scheduled maintenance on HTP boiler system serving both heating and domestic hot water. Verified proper operation of heating thermostats, confirmed boiler pressure settings, and tested system startup with successful heating cycle. Removed and cleaned flame sensor and igniter, flushed drain lines, and disassembled condensate pump to address poor drainage performance. Inspected burner assembly and heat exchanger, confirming all components are functioning properly with no issues detected.
Completed routine heating maintenance visit on 1988 furnace unit under membership agreement. Performed comprehensive furnace tune-up and heating system check with no reported issues found. Unit remains in good operating condition with proper flame characteristics observed, though heat exchanger visual inspection was limited due to camera equipment malfunction.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.