HVAC, Plumbing, Electrical & IAQ in Chippewa Falls, WI
Since 1959 Hurlburt, we make it our mission to keep your home comfortable and protected.
with Purchase of Furnace & AC
Includes Merv 16 5" media cabinent and ApcoX Premium UV-light. Cannot be combined with any other offers. Must present coupon at time of service. Not valid on previously completed work.
Expert Heating Repair in Chippewa Falls, WI
The winter weather in Chippewa Falls makes it essential to have a dependable heating system because temperatures drop brutally low. When something goes wrong, you don’t want to risk damaging the system or injuring yourself with a DIY heating repair in Chippewa Falls. Instead, you need to call Hurlburt. We’ll send a trained technician to find and fix the underlying problem so that you don’t have to go without heat.
We Offer These Heating Solutions
- Heating Repair: We work on gas and electric furnaces, heat pumps and boilers. We fix faulty igniters, broken blower motors, worn-out heat exchangers and many other problems.
- Heating Installation: A heater installation takes about four to eight hours to complete. We’ll size the system to your home using precise load calculations.
- Heating Maintenance: Join the Hurlburt Family Rewards Program to stay on top of seasonal tune-ups. You’ll also enjoy discounts and priority service for future repairs.
Professional AC Repair in Chippewa Falls, WI
We’ll design a cooling system that perfectly matches your needs. This may look like a central setup with ductwork or a ductless mini-split using heat pump technology. The home’s square footage and layout impact choosing the right equipment. When something goes wrong, we’re just a phone call away. We’ll send a technician to implement a lasting solution that keeps the home cool and energy-efficient.
Cooling Services That Matter
- Cooling Repair: We replace outdated compressors, fix refrigerant leaks and resolve other urgent issues.
- Cooling Installation: We’ll dispose of old equipment for you when installing a new system.
- Cooling Maintenance: The Hurlburt Family Rewards Program simplifies remembering to schedule regular tune-ups and saving money on future repairs.
Skilled Plumbers in Chippewa Falls, WI
Our plumbers in Chippewa Falls, WI install water heaters, repair sump pumps, clear clogged drains and more. Emergency plumbing service is available for water leaks and burst pipes. We’re experts at finding and fixing hidden leaks beneath floors and behind walls.
You don’t want to ignore leaks and burst pipes because they increase the risk of water damage. Moisture buildup can lead to mold growth that causes respiratory and structural problems. Our solutions for leaks and burst pipes include pipe repairs, repiping and installing new shut-off valves. We’ll consider the leak’s location and severity to choose the best option.
Plumbing Services That Keep Your Home Leak-Free
- Plumbing Repair: We offer repairs that fix low water pressure, water temperature issues and slow or clogged drains. We’ll make sure all of your plumbing flows freely.
- Plumbing Installation: We install toilets, faucets, sump pumps, pipes and other plumbing essentials. Using quality materials and following local codes ensures every installation meets code.
Licensed Electricians in Chippewa Falls, WI
Do you need to procure an EV charger upgrade? Hurlburt wants to help. We’ll match the charger to your charging needs and electrical system. Some homes require upgrades to their wiring to ensure compatibility with an EV charger. Some also require the installation of a dedicated circuit to feed the charging station. We’ll do a thorough inspection to see which upgrades your home needs.
We offer support for whole-home generators, smart home devices and other major electrical projects, too. We can even completely rewire your home. For example, if you’re still using outdated knob-and-tube wiring, we can upgrade it with modern grounded wiring. This makes the home safer by reducing the risk of electrical fires.
Update Your Home With a Safe Electrical System
- Electrical Repair: We fix broken outlets, faulty circuits, loose wiring and more. All repairs come with extra checks to keep your home safe.
- Electrical Installation: We install generators, security systems, switches, outlets, ceiling fans and other electronics. Our team follows all electrical codes to ensure everything meets regulations and operates safely.
Trusted Home Services in Chippewa Falls
We’re the company that folks call when they need emergency HVAC in Chippewa Falls. We’ve helped numerous customers with furnace replacements after unexpected breakdowns. We’re also a trusted resource for achieving better indoor air quality in Chippewa Falls, WI. The humidity swings and seasonal allergens here contribute to stale, uncomfortable indoor air. With a whole-home air purifier in place, it becomes much easier to breathe easier and stay comfortable year-round.
Areas We Serve
- West Hill Residential Historic District
- Upper Westside
- North River Fronts
Book Reliable HVAC, Electrical or Plumbing Solutions Today
We offer same-day service for emergency issues that need immediate attention, like burst pipes and refrigerant leaks. The technician who comes to your home will have gone through training and background checks. All HVAC installations we perform follow precise load calculations because we care about lasting performance.
Hurlburt isn’t your average home services company. We’re an all-in-one provider of electrical, HVAC and plumbing work. You won’t have to juggle multiple contractors just to get repairs or new installations. Homeowners frequently call us for heating and electrical upgrades. We love syncing thermostats and lighting with smart home systems to achieve better comfort and optimal energy efficiency.
Joining the Hurlburt Family Rewards Club gives you an easy way to save money on future repairs. Contact Hurlburt now to access professional solutions for plumbing, electrical, or HVAC in Chippewa Falls, WI.
Recent Jobs and Reviews in Chippewa Falls, WI
Job Locations and Reviews
Responded to a no-heat service call on a 27-year-old Heil 80% furnace. Diagnosed failed thermostat that showed no display and was incorrectly activating AC. Inspection revealed all four burners had internal cracks, posing a safety hazard. Performed safety shutdown procedure and documented system condition with photos of the furnace installation and internal components.
Conducted site assessment of residential boiler system experiencing zone heating issues. Inspected and documented damaged radiators that appear to have previously frozen, though client had capped affected components to maintain partial system functionality. Took detailed measurements of baseboards and photographed existing installations for estimation purposes. This case will likely require comprehensive repairs and may involve insurance claim processing.
Diagnosed 23-year-old Gibson furnace with intermittent ignition failure issues. Customer had previously replaced blower motor and igniter with continued operation problems. Observed unit shutting down prematurely twice during inspection, noted excessively noisy combustion blower and faulty pressure switch requiring replacement. Control board also suspected of malfunction, consistent with known issues in this model.
Installed a new Rusco spin down whole house sediment filter (1" inline) with new ball valves to improve water quality and protect plumbing fixtures from mineral damage and stains. System will capture dirt and sediment, providing cleaner, clearer drinking water. Completed water line repair using one fitting during the 3-hour service call.
Responded to no-heat service call for a McClain boiler system, less than 2 years old, that was cycling on and off intermittently. Diagnostic inspection revealed gas ignition failure. Identified faulty components covered under manufacturer warranty and submitted estimate to customer for replacement parts.
Performed annual tune-up on 2003 high-efficiency boiler which is in generally good condition. Inspection revealed system requires new HSI, lacks proper air elimination, and has an inaccurate pressure/temperature gauge. Recommended complete radiator system flush, drain and treatment along with installation of missing components to bring system to proper specifications.
Responded to service call for failed lift pump on main drain near furnace. Diagnosed sewer pump in basement not working due to float mechanism being obstructed by accumulated solids. Performed thorough cleaning of the tank to remove debris and manually rotated pump to ensure proper operation and prevent future hang-ups.
Performed comprehensive tune-up service on 16-year-old Lennox furnace. Inspected all components which were found to be in good working condition and operating within manufacturer specifications. System functioning properly at time of departure.
Completed furnace preventative maintenance on 5-year-old FRP system. All components operating within specifications; replaced customer-supplied air filter. Identified water heater actively leaking, causing chimney blockage and combustion rollout issues. Advised customer immediate water heater replacement is required and provided estimate options per their request.
Serviced IBC boiler experiencing intermittent ignition failures. Performed comprehensive maintenance including cleaning flame sensor, washable components, and verifying zone/pump operation. Adjusted combustion parameters to optimal levels (high fire CO2 at 10.3%, low fire at 9.6%). Multiple test cycles confirmed proper operation with stable combustion readings. System is now functioning correctly.
Performed annual furnace tune-up on 1-year-old unit. Inspected heat exchanger with no compromises found, tested electrical components (all within specification), verified clear routine lines and proper condensate drainage. Humidifier pad was dirty with damper closed; recommended replacement pad to customer. System operated correctly with 75° temperature rise during 15-minute test run. Confirmed proper gas pressures and verified venting system integrity.
Responded to water leak emergency in mechanical room where a 3-inch section of copper pipe between two PEX lines had failed at the connection point. Water supply to the duplex was shut off prior to arrival. Removed the failed copper section and replaced with continuous PEX tubing, eliminating the vulnerable transition point that was previously spraying water onto the furnace. Restored water service to both residential units after confirming proper installation and no leaks.
Installed homeowner-supplied kitchen faucet with side sprayer in double-basin stainless steel sink. Assessed basement toilet installation but determined customer's Tuscany model was incompatible with existing high flange; substituted with Gerber toilet for proper fit and function. Boxed customer's original toilet and placed in their vehicle.
Diagnosed and resolved no heat issue in basement zone with fan coil and mercury thermostat. Upon inspection, discovered disconnected wire from end switch to relay to thermostat. Reconnected wire, restored system functionality with independent control for both upstairs and downstairs thermostats. Equipment inspected included CF5282868 unit and ceiling-mounted blower assembly in basement utility area.
Conducted semi-annual maintenance on 20+ year old furnace. Diagnostic testing showed unit operating at 87% efficiency (below rated 92%) with elevated stack temperature of 157°. Heat exchanger appears intact, but secondary exchanger likely becoming plugged. Discussed replacement options with homeowner who will consider options after the holidays.
Performed comprehensive furnace tune-up on 5-year-old unit. Replaced dirty filter with customer-supplied replacement and verified all electrical components were within specifications. Inspected heat exchanger (no issues found), confirmed proper condensate drainage, and tested system operation with verified gas pressures showing 45° temperature rise. Unit functioning optimally after 15-minute test run.
Performed scheduled annual maintenance on residential generator. Completed full service including replacement of spark plugs, air filter, and oil filter along with complete oil change. Reset maintenance notification, verified proper system settings and confirmed battery condition. Generator is fully operational and maintenance requirements have been satisfied for the current service cycle.
Located and repaired a burst pipe in a challenging crawl space with significant ice buildup due to non-functioning heat in that area. Replaced approximately 5 feet of damaged line with PEX and installed new valves in the laundry room, resolving the leak despite difficult access through a very small crawl space opening.
Replaced leaking expansion tank and air vent on customer's boiler system. Installed new components and verified proper operation with no leaks during startup. System now functioning correctly with normal water flow.
Performed scheduled tune-up maintenance on Weil-McLain boiler at client's airplane hangar facility. Disassembled and thoroughly cleaned heat exchanger, flame sensor, and condensate system. Verified proper boiler operation and functionality after service completion.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions | [cookie_preferences_link]
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.
