HVAC, Plumbing, Electrical & IAQ in Chippewa Falls, WI
Since 1959 Hurlburt, we make it our mission to keep your home comfortable and protected.
with Purchase of Furnace & AC
Includes Merv 16 5" media cabinent and ApcoX Premium UV-light. Cannot be combined with any other offers. Must present coupon at time of service. Not valid on previously completed work.
Expert Heating Repair in Chippewa Falls, WI
The winter weather in Chippewa Falls makes it essential to have a dependable heating system because temperatures drop brutally low. When something goes wrong, you don’t want to risk damaging the system or injuring yourself with a DIY heating repair in Chippewa Falls. Instead, you need to call Hurlburt. We’ll send a trained technician to find and fix the underlying problem so that you don’t have to go without heat.
We Offer These Heating Solutions
- Heating Repair: We work on gas and electric furnaces, heat pumps and boilers. We fix faulty igniters, broken blower motors, worn-out heat exchangers and many other problems.
- Heating Installation: A heater installation takes about four to eight hours to complete. We’ll size the system to your home using precise load calculations.
- Heating Maintenance: Join the Hurlburt Family Rewards Program to stay on top of seasonal tune-ups. You’ll also enjoy discounts and priority service for future repairs.
Professional AC Repair in Chippewa Falls, WI
We’ll design a cooling system that perfectly matches your needs. This may look like a central setup with ductwork or a ductless mini-split using heat pump technology. The home’s square footage and layout impact choosing the right equipment. When something goes wrong, we’re just a phone call away. We’ll send a technician to implement a lasting solution that keeps the home cool and energy-efficient.
Cooling Services That Matter
- Cooling Repair: We replace outdated compressors, fix refrigerant leaks and resolve other urgent issues.
- Cooling Installation: We’ll dispose of old equipment for you when installing a new system.
- Cooling Maintenance: The Hurlburt Family Rewards Program simplifies remembering to schedule regular tune-ups and saving money on future repairs.
Skilled Plumbers in Chippewa Falls, WI
Our plumbers in Chippewa Falls, WI install water heaters, repair sump pumps, clear clogged drains and more. Emergency plumbing service is available for water leaks and burst pipes. We’re experts at finding and fixing hidden leaks beneath floors and behind walls.
You don’t want to ignore leaks and burst pipes because they increase the risk of water damage. Moisture buildup can lead to mold growth that causes respiratory and structural problems. Our solutions for leaks and burst pipes include pipe repairs, repiping and installing new shut-off valves. We’ll consider the leak’s location and severity to choose the best option.
Plumbing Services That Keep Your Home Leak-Free
- Plumbing Repair: We offer repairs that fix low water pressure, water temperature issues and slow or clogged drains. We’ll make sure all of your plumbing flows freely.
- Plumbing Installation: We install toilets, faucets, sump pumps, pipes and other plumbing essentials. Using quality materials and following local codes ensures every installation meets code.
Licensed Electricians in Chippewa Falls, WI
Do you need to procure an EV charger upgrade? Hurlburt wants to help. We’ll match the charger to your charging needs and electrical system. Some homes require upgrades to their wiring to ensure compatibility with an EV charger. Some also require the installation of a dedicated circuit to feed the charging station. We’ll do a thorough inspection to see which upgrades your home needs.
We offer support for whole-home generators, smart home devices and other major electrical projects, too. We can even completely rewire your home. For example, if you’re still using outdated knob-and-tube wiring, we can upgrade it with modern grounded wiring. This makes the home safer by reducing the risk of electrical fires.
Update Your Home With a Safe Electrical System
- Electrical Repair: We fix broken outlets, faulty circuits, loose wiring and more. All repairs come with extra checks to keep your home safe.
- Electrical Installation: We install generators, security systems, switches, outlets, ceiling fans and other electronics. Our team follows all electrical codes to ensure everything meets regulations and operates safely.
Trusted Home Services in Chippewa Falls
We’re the company that folks call when they need emergency HVAC in Chippewa Falls. We’ve helped numerous customers with furnace replacements after unexpected breakdowns. We’re also a trusted resource for achieving better indoor air quality in Chippewa Falls, WI. The humidity swings and seasonal allergens here contribute to stale, uncomfortable indoor air. With a whole-home air purifier in place, it becomes much easier to breathe easier and stay comfortable year-round.
Areas We Serve
- West Hill Residential Historic District
- Upper Westside
- North River Fronts
Book Reliable HVAC, Electrical or Plumbing Solutions Today
We offer same-day service for emergency issues that need immediate attention, like burst pipes and refrigerant leaks. The technician who comes to your home will have gone through training and background checks. All HVAC installations we perform follow precise load calculations because we care about lasting performance.
Hurlburt isn’t your average home services company. We’re an all-in-one provider of electrical, HVAC and plumbing work. You won’t have to juggle multiple contractors just to get repairs or new installations. Homeowners frequently call us for heating and electrical upgrades. We love syncing thermostats and lighting with smart home systems to achieve better comfort and optimal energy efficiency.
Joining the Hurlburt Family Rewards Club gives you an easy way to save money on future repairs. Contact Hurlburt now to access professional solutions for plumbing, electrical, or HVAC in Chippewa Falls, WI.
Recent Jobs and Reviews in Chippewa Falls, WI
Job Locations and Reviews
Responded to kitchen sink leak caused by a hole in galvanized nipple. Replaced deteriorated galvanized pipe fitting with new PVC components and installed proper P-trap assembly to ensure proper drainage and eliminate leak.
Responded to service call for Lennox furnace with alert code 291 (Heat airflow below minimum). Diagnosed system operating at approximately 85% capacity with abnormal noise. Furnace currently heating but self-limiting; determined that installation of a Discharge Air Sensor (DAS) will likely be necessary for proper system operation. Customer to receive estimate for recommended repair.
Performed scheduled furnace tune-up on 5-year-old unit for Family Reward Member. Inspected system components including filter (found very dirty), blower (clean), electrical connections (within specifications), condensate lines (clear), and heat exchanger (no compromises). Verified proper gas pressures, inspected venting, and confirmed system operation with 70°F temperature rise during 20-minute test cycle. Recommended filter replacement.
Responded to callback for no heat issue after previous repair attempt. Diagnosed failed zone valve end switch as root cause. Installed new zone valve, verified thermostat wiring integrity, and performed multiple system tests at customer's request to confirm proper operation and heat restoration.
Responded to no heat complaint on 24-year-old Gibson furnace blowing cold air. Diagnosed condensate drainage issue; cleared blocked drain lines that previous technician had only partially addressed. Inspection revealed actively leaking heat exchanger collector boxes. Temporarily restored heat function after drain system service, but scheduled follow-up appointment due to critical heat exchanger deterioration requiring immediate attention.
Diagnosed and repaired no-heat issue on 8-year-old boiler system where relay was chattering on pump control when jumped at thermostat connection but operated properly when jumped at control. Temporarily restored heating functionality by installing customer's thermostat directly in mechanical room to bypass faulty wiring.
Responded to warranty call regarding lukewarm hot water. Determined water heater was sooted due to low gas pressure. Replaced water heater and coordinated with River Valley to replace regulator and verify proper gas pressures. Documented electrical panel and utility room configuration with photos.
Responded to emergency service call for leaking pipe at top of water heater system with integrated boiler. Located pinhole leak in copper pipe running to dishwasher. Cut out damaged section of pipe and replaced it to resolve the leak, restoring proper function to both water heater and connected boiler system.
Responded to no heat call for 33-year-old Lennox Pulse furnace. Upon inspection, identified barnacles on heat exchanger and attempted pressure test but was unable to remove gas to complete testing. Restored heat operation and advised customer about safety concerns, parts availability issues, and recommended system replacement. Customer already has replacement scheduled with another company.
Performed annual tune-up maintenance on three Navien boilers (two in main residence, one in pole shed). Completed full system cleaning including inlet filter inspection on all units. Identified potential warranty issue with DHW boiler and documented with photos for Navien warranty claim submission. The remaining two boilers were confirmed operational and properly prepared for winter service.
Responded to customer callback regarding missing AC display on previously installed thermostat. Diagnosed issue as missing wire adapter between 4-wire thermostat and 5-wire furnace connection. Installed appropriate wire adapter at the control board and reconfigured thermostat settings, successfully restoring AC functionality on the display.
Performed comprehensive tune-ups on three Goodman furnaces (7-9 years old) in commercial property. Inspected heat exchangers on all units with no cracks or holes found, however identified two units with leaking cold end header boxes and one unit with a noisy combustion blower. Prepared and submitted estimates for repairs to client via email.
Successfully disconnected and capped copper waterlines under kitchen sink to facilitate customer's remodel. Noted significant corrosion in basement copper lines that may require future attention. Documented existing water treatment system consisting of dual filtration tanks and WELL-TRO pressure tank for reference.
Replaced non-functioning 40-gallon natural gas storage vessel water heater in basement utility room. New Bradford White unit was installed with proper connections to existing copper supply lines, gas line, and metal flue pipe. Customer reported no hot water prior to service; system is now operational.
Diagnosed and repaired a condensate drain leak at the base of the 1.5-year-old furnace that was causing water pooling and early corrosion. Disassembled the improperly sealed drain joint, shortened the pipe to improve drainage slope, and properly sealed the connection with silicone adhesive. Verified repair by testing water flow through the system with no further leakage observed.
Diagnosed low humidity issues (maximum 29%) in home due to incompatible bypass humidifier installation. System operates correctly during heating mode but fails during cooling. Determined that the current setup was insufficient because the air handler is used only for air conditioning with cold water supply to humidifier. After consultation with technician Nick, ordered steam humidifier replacement which will provide superior performance utilizing the existing 240V outlet at the unit.
Responded to no-heat call for 8-year-old American Standard furnace that was not maintaining set temperature. Diagnostic testing revealed furnace was tripping on high limit protection due to severely clogged filter that had not been changed since May of previous year. Removed and replaced air filter, verified proper operation through first and second stage heat cycles without tripping. Inspected heat exchanger - condition good. Instructed customer on 2-3 month filter replacement schedule to prevent future issues.
Successfully installed new 40-gallon LP power vent water heater in utility closet. Connected copper water lines and gas supply, ensuring proper venting. System tested and confirmed operational with no leaks.
Performed comprehensive furnace tune-up on an older Carrier unit. All components tested within specifications with no gas leaks detected. Successfully installed customer-supplied Ecobee thermostat with existing four-wire configuration; customer advised that fan-only operation would require additional wiring in the future.
Replaced failed blower motor in HVAC unit. Accessed unit, removed blower housing brackets to extract old motor, then installed new motor from inventory. Verified proper operation after installation with full system test. Unit now functioning correctly.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions | [cookie_preferences_link]
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.
