We’ve assisted homeowners for over 65 years and will proudly service your home as well.

A heating system that works properly keeps your home safe and comfortable throughout the frigid winter months. We can fix, install, or maintain a furnace or heat pump to ensure that each room in your house is consistently comfortable. We work uniformly and efficiently at all times, taking care to clean up after ourselves and leave your home as tidy as we found it.
Count On Us for These Professional Heating Services:
- Heating Repair: A malfunctioning furnace or heat pump can lead to gas leaks, frozen pipes, or other serious issues. Our team will make timely heating repairs to ensure that your home remains cozy throughout the long, cold winter.
- Heating Installation: A new furnace is typically more efficient and easier to operate than an older model. In addition, you may qualify for tax credits or other incentives to keep current and future costs to a minimum.
- Heating Maintenance: Ideally, you’ll have your furnace serviced and cleaned once or twice a year. The Hurlburt Family Rewards Program can make it easier to get the service you need in a convenient and timely manner.
Ensure your home in St. Paul is a cool, comfortable respite during the hotter months. The late spring, summer, and early fall months tend to be warm and humid. We can fix, install, or maintain your cooling system to ensure that a clogged condensate line or broken fan blade won’t cause you to overheat while at home.
We’re Happy to Provide These Cooling System Solutions:
- Cooling Repair: It’s no sweat for our team to diagnose and fix any type of issue that might befall your air conditioning system. If your system is still under warranty, it may cover some or all of the cost of needed repairs.
- Cooling Installation: Modern cooling systems offer a number of options, such as zoned cooling, cooling schedules, and smart tools. This may help you keep cooling bills to a minimum while ensuring everyone can stay comfortable indoors when it’s uncomfortably warm outside.
- Cooling Maintenance: When we maintain your cooling system, we can help catch small issues before they spiral out of control. You can also minimize the risk of voiding a warranty or otherwise spending money on repairs that could have been avoided. Our Hurlburt Family Rewards Program makes it easy to get the service that you need.
- Indoor Air Quality
A cracked pipe or a leak can cause damage to walls, insulation, or other items in your home. We can diagnose and fix these and other issues to ensure that all your plumbing pipes and fixtures function properly. When done correctly, upgrading your home’s plumbing may increase its value as well.
Count on our expert electricians! From EV charger installation to new electrical panels, we do it all. You can count on us to repair wiring, lights, and switches as well as replace and install it all.
We’ll Gladly Assist You With These Electrical Services:
- Electrical Repair: Flickering lights, a hot dimmer switch, or exposed wires can be signs of serious issues that can’t be left unchecked. An electrician will diagnose the cause of your electrical problem and fix it with materials that are durable and adhere to local codes.
- Electrical Installation: We will install new switches, wires, or other items in a timely and safe manner. This ensures that you can use your washer, stove, and computer at the same time without worrying.
Whether we’re repairing heating systems near Como Park or installing new cooling systems on homes near St. Thomas University, we’re proud to serve the community however we can. We’ll also be happy to help install a new EV charger on your Summit Avenue home or repair a leaky pipe on your property close to where the old Ford assembly plant was located.
Our team of professionals will provide a variety of plumbing, electrical, and HVAC services in a timely and affordable manner. We will treat your home just like we would our own, which means that you’ll get great service from the moment you call us to the moment we finish your project. Before work begins, we’ll give you a comprehensive explanation of what we need to do and how much it will cost and let you decide how you want to proceed. Welcome to the Hurlburt Family!
When you need help from a plumbing, electrical, and HVAC company in St. Paul, give the team at Hurlburt a call today!
Hurlburt Heating & Plumbing has completed 20 jobs in Saint Paul, MN in November 2026.
The most recent job was on November 16, 2026.
Hurlburt Heating & Plumbing has completed 572 jobs in Saint Paul, MN in the last 12 months. The first job there was in October 2024.
Diagnosed a freeze-damaged exterior sillcock that was discharging water into the basement during use, with the removed copper stem showing a split and heavy corrosion. Replaced the failed sillcock at the exterior wall and restored proper operation, eliminating the leak.
Performed a biannual member plumbing inspection of the basement mechanical room, including the water treatment tanks, expansion tank, and associated copper piping, valves, and controls, and evaluated hard water conditions and a ballvalve concern. Presented both repair and treatment solutions to the customer, who will contact the office to proceed with any work.
Responded to a warranty call for an overheating in-floor radiant heating zone. Diagnosed the cause as the boiler's in-floor loop supply setpoint being programmed at 180°F and reduced it to 135°F at the boiler controller to bring floor temperatures within a safe range. Determined that a mixing valve is required on the radiant loop, since the boiler also supplies the DHW indirect tank, and initiated the return-install paperwork to have the valve installed and the boiler parameters finalized.
Performed a plumbing inspection of the fuel piping and distribution components, including the crawl space piping and exterior gas meter assembly, to evaluate corrosion reported on the fuel distributor. Surface rust and discoloration were noted on the meter-side pipe fittings. During crawl space access, the door contacted a wall-mounted CO sensor and dislodged it; the sensor was remounted with two new pilot holes at a lower position to prevent door contact and is now secure.
Responded to a no-heat call on a gas furnace under 10 years old. The inducer motor energized but the hot surface igniter cycled without establishing main burner ignition. Diagnosis found a failed integrated furnace control board, which was replaced. The system was tested through a full heating cycle with proper ignition, flame sense, and sustained burner operation confirmed.
Responded to a no-heat call on a furnace under 10 years old where the thermostat called for heat but the unit failed to produce warm air. Inspected the system and used a handheld digital meter and probe to take temperature readings at the furnace cabinet and surrounding components to evaluate heating operation. Customer had already replaced the filter, and the unit was confirmed powered on; findings were documented for follow-up.
Diagnosed a continuously running toilet caused by a failed fill valve and replaced the fill valve to restore proper water shutoff and tank refill operation. Inspected the supply stop and connections beneath the fixture, and checked the bathroom sink drain assembly, including the P-trap and tailpiece, in response to the reported clog.
Responded to a no-heat call with smoke and exhaust odor reported at the 2006 unit. Found the exhaust vent terminal blocked with leaves, causing flue gases to backdraft into the boiler and out through the water heater venting. Cleared the obstruction and restored proper venting, and the boiler is now fully operational with normal exhaust flow.
Performed a furnace tune-up and safety inspection on a 34-year-old unit. Inspection camera imaging confirmed multiple cracks and holes in the heat exchanger, resulting in carbon monoxide leaking outside the furnace during operation, along with a failing inducer draft motor and an oil-leaking blower motor. The furnace was deemed unsafe to operate, and a furnace replacement estimate was scheduled.
Diagnosed a 30-year-old furnace failing to maintain setpoint and found the inducer draft motor flooded with condensation. Removed the inducer, cleared the condensate and drain line, and restored operation; combustion analysis confirmed CO at 3 ppm with 89.5% efficiency. The secondary heat exchanger is plugged, not condensing properly, and severely rusted internally, and may be rusted through, creating a potential carbon monoxide leak. The repair is temporary with no guarantee, and furnace replacement is recommended.
Installed an owner-supplied gooseneck faucet at the laundry utility sink, connecting it to the existing hot and cold supply lines and verifying proper operation and flow. Inspected the surrounding supply piping and shutoff valves during the installation; noted corrosion on the copper supply lines and fittings, and a follow-up evaluation of the water heater and boiler is recommended.
Diagnosed whole-house low water pressure, with hot side pressure lower than cold, and traced the cause to the main gate valve at the water meter, which was found partially closed. Fully opened the corroded gate valve to restore full flow and verified normal pressure at fixtures. The aged valve shows heavy corrosion and should be considered for replacement with a full-port ball valve to prevent future restriction or failure.
Performed annual boiler maintenance, including cleaning the flame sensor and burners and vacuuming the boiler cabinet. Verified gas pressure and performed a combustion analysis (CO at 4 ppm), with all readings within acceptable limits. Bled air from the radiators on both floors and confirmed proper zone valve operation; the system is operating normally and ready for the heating season, with a sediment filter installation to follow.
Performed a tune-up and combustion analysis on a 17-year-old gas furnace; gas pressure was within specification, but flue gas testing at high fire showed carbon monoxide readings up to 147 ppm. Inspection revealed apparent cracking on the primary heat exchanger and visible leakage at the secondary heat exchanger, along with cabinet corrosion, indicating a likely safety concern. Recommended heat exchanger or furnace replacement and scheduled a replacement estimate.
Performed annual maintenance on a high-efficiency NTI boiler, restoring system pressure to 15 psi by adding water and verifying proper burner ignition with a carbon monoxide reading of 49 ppm. Bled radiators that were not heating to purge trapped air, confirming water flow throughout; the boiler is operating and heating as intended.
Performed annual maintenance on a 10-year-old Trane furnace, including cleaning the flame sensor rod and burners with a wire brush. Verified hot surface igniter resistance and inducer motor amperage within specification, and inspected the heat exchanger with a camera, finding no rust or cracks. Confirmed the furnace is heating properly with carbon monoxide measured at 5 ppm.
Responded to a report of loud noise during boiler operation, with the gas valve identified as the suspected source. Inspected the unit and was unable to reproduce the noise during operation. Documented heavy corrosion and moisture on the temperature and pressure relief valve fittings and discharge piping, and provided repair and replacement estimates for the boiler, including the gas valve.
Responded to a callback for a slow leak in the main floor bathroom and traced the leak to the vintage sink. Discussed replacement options with the customer, who elected to retain the vintage sink and pursue a rebuild of the vanity; pricing for the rebuild will be prepared separately. Completed the approved repair on the Toto toilet.
Diagnosed a blockage in the vertical section of the original kitchen drain line after a prior homeowner cabling attempt was unsuccessful. Cabled the line from the plastic-to-cast iron transition and again from the kitchen sink, fully clearing the obstruction on the second pass. Verified unrestricted flow with no backup, though the camera could not be advanced past the bend for a full visual inspection.
Responded to a no-heat call on a 14+ year-old natural gas hot water boiler, a discontinued model; the system was operating on arrival after the customer's troubleshooting efforts. Inspection with the front cover removed found the heat exchanger dirty, a likely cause of the intermittent failure. Recommended boiler replacement due to the unit's age and discontinued status, and heat exchanger cleaning as an interim measure.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.