Serving since 1959 and we look forward to meeting you!

Reliable and prompt air conditioning services keep your home an oasis of cooling comfort during the hotter months in Wayzata. You can trust our technicians to provide expert maintenance, repair, and replacement services when you need them. If you’re unsure what service you need, just ask! We’ll be happy to inspect your cooling system and offer recommendations.
AC system failures can often occur suddenly, causing stress and discomfort. When you call our technicians, we’ll arrive quickly, in a well stocked service van, ready to help. We’ll diagnose and repair any make, model, or system, from a central air unit to a ductless mini-split to a heat pump.
Investing in regular maintenance for your air conditioning system is crucial for reducing energy costs and extending its life. We offer comprehensive maintenance checkups to catch repairs when they’re small, helping you avoid premature breakdowns and expensive service calls.
AC Services You Can Count On:
- AC Repairs: Don’t stress when your AC starts acting up! Call our technicians to diagnose and repair the issue. Whether your system is blowing warm air or no air at all, we’ll be there to help make your home comfortable again.
- AC Installation: If you’re unsure whether it’s time for a new air conditioning unit for your home, call us for help! We’ll be able to provide energy-efficient upgrade options if your AC is past its prime and needs to be replaced.
- AC Maintenance: Ensure your cooling system provides reliable, energy-efficient service for as long as possible with professional maintenance. With our Hurlburt Family Rewards Club, you get just that! Comprehensive tune-ups will catch problems when they are small.
You depend on your heating system to get you through Minnesota’s frigid winters, so it’s essential to keep it performing at its best. We offer expert heating services in Wayzata, from repairs and annual maintenance to new system installations.
Our experienced technicians are dedicated to keeping all heating systems working optimally, including furnaces, boilers, heat pumps, and more. That means when you need heating repair, we’ll be there to help. We care about your comfort and deliver expert advice and workmanship that keeps your home at the optimal temperature.
Are you looking to switch to a modern heating system to reduce costs? We’re proud to carry some of the most efficient models available to homeowners today. We’re happy to recommend the perfect upgrade and provide a cost-effective quote for you. Call our team today to get started.
Heating Services We Can Assist With:
- Furnace Repairs: Is your heating system making strange noises or emitting odd smells when you turn it on? Our team of technicians can quickly diagnose and repair any issue your heating system is experiencing. Our effective repairs get to the root of the issue and provide lasting results.
- Furnace Replacements: If your furnace is getting up in years, consider replacing it. Our replacement services perfectly size and install energy-efficient options that fit your budget.
- Furnace Maintenance: Take care of your heating system with expert maintenance! Our technicians ensure your furnace, heat pump, or boiler runs smoothly despite the harsh weather in Minnesota. Plus, we offer the Hurlburt Family Rewards Club, which provides comprehensive care that saves you money in the long run.
One small plumbing issue in the home can cause big problems. When your toilet isn’t flushing properly or your shower stops working, you need a plumber to quickly get everything flowing again. Our licensed and experienced team is ready to come to your rescue. As a trusted local plumbing contractor, we bring great service and value to your Wayzata home.
If your water heater isn’t heating, your sump pump is jammed, or there’s water where it shouldn’t be, we’ll diagnose the problem quickly and provide you with an estimate before we get to work. Since our service vehicles carry a wide range of spare components, we can often solve plumbing problems on the same day.
We can also help with plumbing installations, ensuring a seamless experience. Call us today to learn more about our plumbing services and to arrange a convenient home visit.
The electrical services we offer Wayzata homeowners are designed to meet your home’s unique needs. If you need an electrical contractor for extensive rewiring in your Bushaway home or maybe you’re considering the benefits of smart home installation, we’re the team for the job.
Our experienced electricians work to the highest standard and are trained in the latest electrical regulations. From new lighting and electrical panels to EV chargers and whole-home generators, we offer all the electrical services you need in one place.
Call us now for fast, friendly electrical service.
A Look at What Our Experienced Electricians Can Help With:
- Electrical Repairs: Noticing flickering lights or outlets hot to the touch? Waiting on electrical repairs could mean damage to your property. Instead, call on our trusted electricians. We’ll properly assess and repair all your electrical problems, ensuring your electrical system is safe, effective, and up to code.
- Electrical Installation: Boost comfort and future-proof your home with expert electrical installations from our team. Whether you want a whole home backup generator, an EV charger installed, extra outlets, or an upgraded lighting installation, we can help.
At Hurlburt, we recognize that each Wayzata neighborhood has its own unique charm and challenges. That’s why we tailor our services to suit homeowners’ needs. From rewiring historical homes in Ferndale to servicing luxury properties in Locust Hills, our team delivers outstanding service ideally suited to your home and its systems.
Welcome to the Hurlburt Family! That’s not just our slogan: It’s a promise of the personalized service you’ll receive when you put your home in our capable hands. With over 65 years of experience in HVAC, plumbing, and electrical, we’re trusted throughout Wayzata to deliver a level of service like no other. But don’t take our word for it—look at the thousands of 5-star reviews we’ve received from very happy customers.
Call Hurlburt today for reliable electrical, plumbing, and HVAC contractor services in Wayzata. Experience our outstanding services for yourself.
Hurlburt Heating & Plumbing has completed 20 jobs in Wayzata, MN between August 2026 and September 2026.
The most recent job was on September 25, 2026.
Hurlburt Heating & Plumbing has completed 159 jobs in Wayzata, MN in the last 12 months. The first job there was in October 2024.
Responded to service call for inadequate hot water delivery and slow hot water response to second floor. Diagnosed faulty recirculation pump affecting system performance. Provided estimate for replacement pump installation to restore proper hot water circulation throughout the residence.
Performed second opinion inspection on 10-year-old Carrier furnace following concerns about heat exchanger corrosion. Conducted thorough internal inspection of heat exchanger using camera equipment, confirming no active cracks or holes present. However, identified severe rust and corrosion at flame entry point to heat exchanger, along with significantly corroded burners. While no immediate safety concern exists, the deterioration presents a potential future hazard. Scheduled furnace replacement estimate to address declining equipment condition.
Responded to service call for multiple plumbing issues including a broken toilet, leaking RPZ backflow prevention system, and lavatory fixtures. Conducted comprehensive inspection of first-floor hallway lavatory sink, upstairs hallway toilet, and backflow prevention assembly. Testing revealed the RPZ backflow preventer failed certification testing and requires rebuild. Upstairs hallway toilet was found to be outdated and actively leaking, requiring replacement. First-floor lavatory faucet inspection determined internal components are beyond repair and cannot be fully rebuilt. Documented all findings with photographic evidence showing the failed Watts RPZ assembly mounted in the mechanical space with deteriorated components and the associated piping configuration. Property also features irrigation water system with iron filtration equipment that adds complexity to the backflow assembly. Provided detailed estimates for complete toilet replacement, lavatory faucet replacement, and RPZ bac
Completed comprehensive boiler repair including replacement of backflow preventer with ball valves on both sides, relief valve, temperature gauge, and zone valve. Performed system draindown and refill over four hours, purged air from all zones, cycled the heating system through all zones to verify proper operation, and confirmed system returned to normal operating parameters.
Responded to heat pump blowing cool air complaint and discovered Honeywell HZ322 zone panel was not properly configured for heat pump operation. Corrected zone panel settings and coordinated with Honeywell technical support to verify proper communication between all system components and remotely reset the internet interface module. System now operating correctly in heating mode with all zones functioning as designed.
Performed comprehensive tune-up on 15-year-old furnace in lower level as requested for home sale inspection. Replaced dirty air filter and conducted diagnostic testing on gas valve assembly and control systems to verify proper operation. All systems confirmed working properly and in good operating condition. Additionally inspected and serviced two garage heaters, confirming all units are functioning safely and efficiently for new homeowner.
Responded to no cool complaint on 5-year-old system with fault code 24 (secondary voltage fuse open) on furnace control board following previous capacitor replacement attempt by handyman. Diagnosed blown fuse on control board, replaced fuse, and verified contactor, capacitor, and wiring at condensing unit were functioning properly. System restored to cooling operation after fuse replacement and component verification.
Completed annual heating and cooling maintenance agreement visit on multiple HVAC systems. Performed comprehensive maintenance on three gas furnaces, inspecting and verifying proper operation of filters, temperature splits, burners, flame sensors, igniters, motors, capacitors, condensate drains, and heat exchangers. All furnaces tested and confirmed operating within normal parameters. Serviced two air conditioning units with 454B refrigerant under 87-degree ambient conditions. Conducted thorough inspection of filters, thermostats, temperature splits, condensers, evaporator coils, blower motors, compressors, refrigerant charge levels, and condensate drains. Both systems tested and confirmed cooling properly with appropriate temperature differentials. Performed maintenance on two mini-split systems with a total of four indoor air handler heads. Inspected filters, thermostats, temperature drop across coils, outdoor condensing units, and condensate drainage. All mini-split components ver
Performed comprehensive inspection of residential sump pump system per customer request. Examined submersible pump unit installed in concrete pit, verified proper operation and positioning, and assessed water level conditions. Inspected complete discharge piping system including vertical PVC discharge line with quiet check valve, confirmed secure mounting and proper connections at basin interface. Evaluated battery backup system components including wall-mounted control unit, battery charger, and backup pump assembly to ensure emergency operation capability. All electrical connections, power cords, and control systems were visually inspected for proper installation and functionality. System found to be operational with all components functioning as designed.
Responded to service call for water shut-off device installation consultation. Conducted thorough site inspection and documented existing plumbing infrastructure, including water heater connections and associated piping. Photographed current plumbing configuration showing corroded water heater with deteriorated metal bands, existing shut-off valve with red handle wheel, copper pipe connections, and flexible supply lines. Assessed cramped utility space conditions and identified optimal installation location for automatic water shut-off device. Evaluated pipe routing options and documented mechanical space constraints to determine equipment compatibility and installation requirements. Provided comprehensive quote for shut-off device installation based on site conditions and necessary materials.
Responded to callback for recurring faucet leak. Performed adjustments to P-trap assembly and faucet head to resolve drainage and leak issues. All connections tightened and tested for proper operation.
Responded to no cooling complaint on approximately 10-year-old air conditioning system. Upon arrival, unit was humming but outdoor fan would not start. Diagnosed failed dual run capacitor using clamp meter to verify amperage readings. Replaced defective capacitor with new unit meeting manufacturer specifications. Installed hard start kit to compressor to improve starting performance and extend equipment life. Tested system operation and verified proper amperage draw on all components. Unit cooling normally at time of departure.
Installed a powered anode rod on a Rheem tank-style water heater to provide corrosion protection. Removed the existing anode rod, installed the new powered unit, and restored water supply to the tank. Conducted a thorough leak inspection at all connection points, secured the power wire to the water piping for proper support, and energized the unit. System tested successfully with no leaks detected and left in full operational service.
Completed annual maintenance on two 90% efficiency furnaces as part of preventative maintenance agreement. Performed comprehensive inspection of both systems including thermostats, indoor air handlers, filters, drain lines, blower motors, inducer motors, capacitors, and electrical wiring—all found in satisfactory condition. Verified temperature splits, inspected heat exchangers, igniters, flame sensors, and confirmed proper gas pressure on both units. Conducted safety inspections including carbon monoxide level testing with acceptable readings. Addressed humidifier malfunction displaying E3 error code on both systems. Diagnosed issue as disconnected outdoor sensor wiring. Reconnected sensor wires and verified proper humidifier operation. All systems operating within normal parameters upon completion.
Responded to complaint of rotten egg smell in hot water from 50-gallon Rheem natural gas water heater (Model PRO+G30+XCN RH62, manufactured March 2021). Unit had never been flushed since installation. Performed water heater flush to remove sediment buildup and bacteria causing sulfur odor. Provided homeowner instruction on proper flushing procedure for future maintenance. Unit operational with adequate hot water supply throughout service.
Responded to a loose shower handle complaint in a residential bathroom. Upon inspection, confirmed the shower valve handle had become loose from normal wear and use. Tightened the handle assembly at the valve stem to restore proper secure operation. The chrome-finished lever-style control with decorative escutcheon plate was properly secured to prevent further movement. Verified handle operated smoothly through full range of motion after tightening. Hot and cold water indicators remained properly aligned. No additional repairs or component replacement required.
Performed comprehensive maintenance on a 15-year-old residential air conditioning system utilizing R-41A refrigerant with ambient temperature at 78 degrees. Conducted thorough inspection of indoor air handler including thermostat operation, air filter condition, condensate drain functionality, blower motor performance, and all electrical wiring and components, all found to be in acceptable working order. Measured temperature split at 12 degrees; while system could achieve slightly better cooling performance, homeowner confirmed current cooling output meets their comfort requirements. Inspected outdoor condensing unit including condenser coil cleanliness, capacitor condition, and electrical connections. Noted that the dual-run capacitor (45+5 MFD) readings fall outside manufacturer specifications and recommended replacement for optimal system performance and reliability. Verified amperage draw on condenser fan motor, compressor, and contactor, all within acceptable ranges. System operat
Completed comprehensive preventive maintenance on one-year-old Carrier air conditioning system utilizing 410A refrigerant. Performed thorough inspection of indoor air handler including air filter, condensate drain line, blower motor assembly, and all electrical wiring and components. Verified proper operation of Alarm.com thermostat set to cooling mode at 67°F. Measured and recorded temperature split across evaporator coil, confirming adequate heat transfer and system performance. Conducted detailed outdoor unit inspection including condenser coil cleanliness assessment, capacitor testing, and visual examination of all electrical connections. Utilized digital multimeter to measure amp draw on condenser fan motor, compressor, and contactor, verifying all readings within manufacturer specifications. Tested refrigerant charge using industry-standard methods with ambient temperature at 78°F, confirming proper system charge with no leaks detected. All system components operating within no
Replaced malfunctioning zone 2 motorized damper that was intermittently sticking during operation. Installed new Belimo damper actuator, verified proper wiring connections, and cycled the zone multiple times to confirm full range of motion and reliable operation across all heating and cooling calls.
Responded to service call for 6-year-old Bryant furnace experiencing intermittent shutdowns during cold weather with blinking diagnostic light and water accumulation in condensate pan. Upon inspection, homeowner reported water leaking into blower assembly during winter operation and requested camera inspection of PVC condensate drain system to identify potential blockages or improper pitch in piping. Performed visual inspection of furnace unit and traced accessible portions of condensate drain lines in apartment building installation. Documented current system configuration with photographs including furnace cabinet, condensate drain piping with trap, and exhaust venting routing. Determined that comprehensive camera inspection of drain system was necessary but could not be completed during this visit due to extended pipe runs throughout multi-unit building structure requiring specialized equipment. Coordinated with management to obtain building layout and piping schematics to plan foll
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.