We’ve assisted homeowners for over 65 years and will proudly service your home as well.

Replacing or fixing a defective or aging heating unit can help keep your home warm throughout the extremely cold winter season. We’re here to make sure your heating system works the way it should, keeping every room in your home warm, comfortable, and energy-efficient without the hassle.
Discover Our Numerous Heating Services for Your Home:
- Heating Repair: If your furnace is constantly cycling or making odd noises, we can help fix those issues. We’ll also fix thermostat issues, gas leaks, or other problems that can put you and your home in danger.
- Heating Installation: Putting a new furnace in your home can save money on utility bills and keep maintenance and repairs to a minimum for up to 20 years. We’ll make sure to install your new system promptly and properly.
- Heating Maintenance: Regular cleanings and inspections can minimize the risk of furnace damage while also improving indoor air quality. The Hurlburt Family Rewards Program can make it easier to get the service you need to protect your investment for years to come.
If your cooling system is more than a decade old and has started to experience issues, it may be time to consider replacing it. We can also fix any minor issues that your system might have, as well as provide routine maintenance to help your air conditioner last for the entirety of its useful life.
Contact Our Team for Great Cooling Services:
- Cooling Repair: When you see moisture near the condenser unit or feel warm air coming out of a vent, it’s time to give us a call. We’ll diagnose the issue quickly to ensure that you can watch TV, sleep, or otherwise enjoy being at home.
- Cooling Installation: A new cooling system is easier to maintain, as older units require parts and coolant that technicians might not readily have available. You’ll also likely save money on cooling bills as well as on maintenance costs for years to come.
- Cooling Maintenance: You should have our technicians inspect your air conditioner at least once a year, either during the spring or fall season. Doing so can prevent unexpected shutdowns or other issues in keeping your home cool. Our Hurlburt Family Rewards Program helps you save on maintenance and more!
A slab leak, clogged toilet or burst pipe can cause a multitude of problems, such as mold growth or a cracked foundation. You may also see increased water bills if a pipe is broken or leaking. Our team can diagnose virtually any kind of plumbing issue to ensure that your home’s pipes and fixtures are working just as they should.
An appliance that overheats when in use might be a sign that your electrical panel needs an upgrade. We can take care of that quickly. We can also fix a frayed wire or take care of other electrical issues. If you’re in need of a trusted Savage electrician, we’re the team to call!
Make an Appointment Today With Our Electricians for:
- Electrical Repair: An exposed or chewed wire might short and possibly cause an electrical fire. Our team will take care of that and other existing problems quickly to prevent any secondary problems from occurring.
- Electrical Installation: Replacing old wires can make your home safer and better suited to modern electrical consumption habits. Putting in a whole home generator, EV charger, or new electrical panel can also make it easier to meet your needs.
Whether we’re installing a whole home generator in a Summit Pointe Park home or a new cooling system in a Hidden Valley Park home, we love serving our community. We’ll be more than happy to take a trip down Highway 13 or County Road 42 to meet you and learn how we can help meet your plumbing, electrical, and HVAC needs.
With our range of HVAC service offerings, as well as plumbing and electrical services, we can help everyone in our community. Having access to timely repair, maintenance, and installation services means that you can fix or otherwise take care of a problem before it has the chance to wreak too much havoc on your home. Remember, we treat everyone like a member of our family. Our goal is to ensure you get great service at an affordable price.
When you need help from an HVAC company, electrician, or plumber in Savage, give our team at Hurlburt a call today!
Hurlburt Heating & Plumbing has completed 20 jobs in Savage, MN between September 2026 and October 2026.
The most recent job was on October 13, 2026.
Hurlburt Heating & Plumbing has completed 165 jobs in Savage, MN in the last 12 months. The first job there was in April 2025.
Responded to a water pressure issue with system pressure measuring at 110 PSI, which exceeds the recommended residential range of 40-80 PSI. Evaluated the existing pressure reducing valve assembly and determined replacement was necessary to restore proper pressure regulation and prevent potential damage to plumbing fixtures and appliances. Provided estimate for installation of a new 1-inch pressure reducing valve with appropriate fittings and connections. The existing plumbing assembly showed signs of age with oxidation on copper piping and corrosion on older components, all mounted on a wooden board in the utility area. Documented current system configuration including valve location, pipe routing, and pressure readings for replacement planning.
Responded to service call for high water pressure issue in residential plumbing system. Upon inspection, confirmed water pressure at 110 PSI, which exceeds recommended residential levels. Diagnosed faulty pressure reducing valve (PRV) as the source of the problem. Removed and replaced defective PRV with new unit and installed new 3/4" ball valve to ensure proper system control and future serviceability. Tested system after installation to verify pressure regulation is functioning within normal parameters.
Completed installation of customer-supplied 50-gallon natural gas A.O. Smith water heater in basement utility room. Connected all necessary copper supply lines, installed proper shut-off valves with blue and red handles for easy identification, and ensured proper venting through existing ductwork. Installed expansion tank and configured all plumbing connections to code with brass fittings and appropriate pressure relief valve assembly.
Responded to a clogged kitchen sink with water backing up in the basin. Upon arrival, confirmed the trap had already been removed, indicating the blockage was located deeper in the drainage system. Utilized drain cabling equipment to clear the kitchen drain line from the sink connection all the way to the main drain line. Successfully removed all blockages and restrictions from the drainage system. Performed video scope inspection of the line to verify complete clearance and confirm no remaining obstructions. Reassembled all drain components and conducted operational testing to ensure proper drainage function with no leaks detected. System restored to full working order.
Responded to a continuously running toilet on the upper level. Upon inspection, diagnosed a faulty fill valve that was preventing the tank from shutting off properly. Removed the defective fill valve assembly and installed a new replacement unit. Tested the flush mechanism and verified proper water level adjustment to ensure the toilet now fills and shuts off correctly without continuous running.
Responded to multiple plumbing issues including leaking fixtures and running toilets. Replaced laundry room faucet due to persistent leak at fixture body. Pulled and reset basement toilet to address water leak at base, installed new wax ring and closet bolts to ensure proper seal. Rebuilt upstairs toilet tank assembly to eliminate phantom filling issue, replaced flapper valve, fill valve, and flush valve components. All fixtures tested for proper operation and verified leak-free upon completion.
Completed comprehensive non-member furnace tune-up on a 6+ year old unit. Performed full system inspection including gas valve assembly, ignition components, and all operational controls with no issues found. All components functioning within normal parameters and unit operating efficiently.
Responded to no heat call on 4-year-old furnace. Upon inspection, discovered water accumulation in the draft inducer assembly preventing proper operation. Removed and cleaned inducer housing, cleared water and debris from assembly, and verified proper drainage. Tested unit through complete heating cycle with successful ignition and operation restored.
Responded to a bathtub drain backup issue. Upon inspection, determined the tub was draining slowly due to a significant hair accumulation in the drain strainer assembly. Removed the tub plug and extracted a large hair ball obstruction from the drain opening using appropriate drain cleaning tools. Tested the drain by running water to verify proper flow and drainage had been restored. Drain is now functioning normally with no backup present.
Responded to recurring kitchen sink drainage issue. Removed p-trap and cabled the drain line 50 feet using 1/4-inch cable while running water to clear suspected grease and food debris blockage. Performed camera inspection to verify complete line clearance and proper flow. Reassembled all drain components, tested system for proper drainage operation, and confirmed no leaks were present.
Responded to kitchen sink clog and determined the blockage was located far out in the main drain line beyond standard reach. Assessed the situation and documented conditions, confirming the obstruction required specialized drain cleaning equipment and technician expertise to properly clear the line and restore proper drainage function.
Completed comprehensive furnace tune-up and maintenance inspection on residential heating system. Inspected and cleaned flame sensor and ignition assembly, verified blower wheel operation, checked air filtration system, and examined inducer motor and gas valve for proper function. Performed combustion analysis confirming system operating at 82.6% efficiency with safe carbon monoxide levels and proper gas pressure. Conducted heat exchanger scope inspection revealing no defects or concerns. Cleared condensation drain trap of buildup to ensure proper drainage. All components found to be functioning within normal operating parameters with no safety issues identified.
Responded to kitchen sink water leak caused by failing SharkBite valve on the hot water line supplying the dishwasher. Removed the defective SharkBite connection and installed a new PEX angle stop valve to restore proper water control and eliminate the leak. System tested and verified operational with no further leakage detected.
Responded to a shower leak affecting the shower head assembly. Upon inspection, identified a faulty Delta shower valve requiring rebuild. Removed and replaced the cartridge on the existing valve body to restore proper function and eliminate the leak. Tested the repaired valve for proper operation and verified no additional leaks were present. System returned to normal operation.
Completed scheduled heating maintenance tune-up per Family Rewards membership agreement with no reported issues or concerns. Performed comprehensive system inspection and routine maintenance procedures on furnace unit. Applied maintenance record sticker to equipment and documented service completion.
Performed scheduled heating maintenance tune-up on recently installed furnace as part of routine preventive maintenance agreement. Completed comprehensive system inspection, verified proper operation of all components, and documented equipment condition with photos of electrical panel and mechanical room showing water heater and HVAC equipment. No issues reported by customer and all systems operating within normal parameters.
Completed return service call to restore gas service to heating system following gas company utility work. Connected gas line to meter assembly and verified proper gas flow to furnace. System restored to normal operation, providing heat and hot water to residence.
Completed heat exchanger replacement under parts warranty on residential furnace system. Disassembled top cabinet by removing all wiring harnesses and internal components to access failed heat exchanger assembly. Removed defective heat exchanger and installed new replacement unit sourced from Stevens Supply Eagan (part number 258168-001). Reinstalled all wiring connections, control boards, and cabinet components to manufacturer specifications. Upon reassembly, initiated heating cycle and performed complete system diagnostics. Adjusted gas pressures to match manufacturer specifications for optimal combustion efficiency. Conducted comprehensive carbon monoxide safety testing throughout operation, confirming all readings within safe acceptable levels. System tested and verified operational with proper heating output and safe combustion parameters. Customer informed that parts covered under warranty with applicable labor, shipping, and warranty processing charges applied to service.
Completed comprehensive furnace tune-up and seasonal maintenance inspection under rewards club membership. Performed thorough system evaluation including flame sensor cleaning, blower wheel inspection, air filtration assessment, inducer motor examination, gas valve inspection, and heat exchanger scope analysis. Conducted combustion analysis confirming 82.4% system efficiency with safe carbon monoxide levels, verified proper gas pressure, measured inducer motor amp draw, and tested flame sensor microamp readings. All components found operating within normal parameters with no defects identified. Recommended regular filter replacement and continued scheduled maintenance to ensure optimal furnace performance.
Responded to emergency gas leak on main supply line to meter. Gas utility had shut off service due to leak discovered during inspection, leaving property without heat or hot water. Upon arrival, identified gas line compromised by tree growth that had grown around and damaged the supply line. Documented existing conditions showing meter installation and affected gas line routing. Coordinated tree removal requirements and identified meter leveling needed to facilitate proper reconnection of gas supply lines by licensed plumber for restoration of service.
©2026 Hurlburt. All Rights Reserved.
Privacy Policy | Terms and
Conditions
This site is protected by reCAPTCHA and the Google Privacy Policy and Google Terms of Service apply.