Plumbing, Electrical, and HVAC company in Plymouth, MN
We’ve assisted homeowners for over 65 years and will proudly service your home as well.
Highly Rated
Satisfaction Guaranteed
0% Financing
Friendly Technicians
A split-level near Medicine Lake can give us a very different set of comfort problems from a larger western Plymouth home with multi-stage equipment and multiple zones. Much of the city grew during the 1970s through 1990s, so aging ductwork and mechanical systems are now a regular part of the service picture across the West Metro. Hurlburt Heating, AC, Plumbing, & Electrical provides heating, cooling, plumbing, electrical, and indoor air quality service throughout Plymouth. Call [site_info_phone_number] or connect online to schedule service.
Whether you’re dealing with sparking outlets or a leaky faucet, make Hurlburt your first call. We’ll get your house back to normal fast!
Plymouth Homes Reflect Several Decades of West Metro Growth
Plymouth’s late-20th-century building boom left the city with a large number of split-level and multi-level homes that now have 30- to 50-year-old duct systems and equipment that may already have been replaced once. Western neighborhoods in the Wayzata Schools catchment include larger executive properties that can use high-capacity, multi-stage systems, while older homes around Medicine Lake may have boilers, radiant heat, or different cooling arrangements.
The housing changes again around Hamel and Old Hamel, where the northwest part of Plymouth retains a more rural identity. French Regional Park on Medicine Lake, Parkers Lake, Millennium Garden, the Hilde Performance Center, and the Luce Line Trail are familiar markers across a city that has expanded through several distinct residential areas. Plymouth also has a sizable townhome and condo footprint, along with strict municipal permitting that applies when mechanical systems are replaced.
Air Conditioning Services in Plymouth, MN
Humid summer weather can expose airflow problems quickly in Plymouth’s split-level and multi-level homes. Upper floors may stay warmer when older ducts are undersized, poorly balanced, or simply showing their age after several decades of use. Spring tree and grass pollen also increases filtration concerns before the cooling season reaches its peak, especially as outdoor activity picks up around East Medicine Lake Park and the Luce Line Trail. Central split systems remain the standard cooling setup across much of the city.
Air conditioning and indoor air quality services include:
Air conditioning replacement
Air conditioning repair
Air conditioning maintenance
Ductless systems
Indoor air quality services
Larger custom homes in the western Wayzata Schools area may use higher-capacity or multi-stage equipment, while older lakeside properties can have boiler or radiant heat paired with a different cooling arrangement. Aging ductwork is also driving demand for duct sealing, air purification, and humidity control throughout Plymouth. When one level of the home stays warmer, replacing the outdoor unit alone may not solve the problem. We need to know how air is moving through the existing ducts before deciding what needs attention.
Electrical services include:
Electrical repair services
Electrical installation and wiring
Whole-home generators
Switches, outlets, and ceiling fans
Panel replacement and repair
EV chargers
Smart home installations
An established home near Parkers Lake may have gone through several rounds of equipment upgrades since it was built, while newer western properties may start with more modern infrastructure. Townhome and condo communities add compact installation spaces and HOA requirements that can affect how projects are approached. Plymouth’s strong interest in high-efficiency equipment and modern controls means electrical work often needs to account for what has already been added to the house. The panel and wiring have to be evaluated as part of that bigger picture.
Heating Services in Plymouth, MN
Plymouth winters can push heating equipment hard for months at a time. Severe sub-zero cold creates immediate furnace concerns, while the first autumn startup can produce the familiar burning-dust smell that sends homeowners checking whether the system is operating normally. Forced-air natural gas furnaces are the standard residential setup across much of the city, but older properties around Medicine Lake and custom estates can include boilers or in-floor radiant heat. The winter conditions familiar around places such as Plymouth Ice Center can arrive quickly once fall gives way to sustained cold.
Heating services include:
Heating installation
Heating replacement
Heating repair
Heating maintenance
Heat pumps
Furnaces
Boilers
Geothermal
Plymouth weather is also known for rapid reversals. A March “false spring” can be followed by another late-season blizzard, while May and September can move quickly between heating and cooling. High-efficiency systems and heat pumps are gaining interest in the market, supported by the Xcel Energy and CenterPoint Energy rebate opportunities. A larger home in western Plymouth may call for multi-stage equipment, while a lakeside property can have a hydronic setup that needs a completely different service plan.
Plumbing Services in Plymouth, MN
Plumbing work in Plymouth often takes place in homes where the mechanical equipment has changed several times since the original construction. A water heater may have been replaced years after the furnace, while boilers, radiant systems, and newer HVAC equipment may share utility space in older properties. Larger custom homes can have more extensive plumbing layouts, while townhomes and condos tend to have compact equipment configurations. That variation is common across a city that grew heavily during the 1970s, 1980s, and 1990s.
Plumbing services include:
Plumbing repair
Plumbing installation
Leak detection and repair
Sewer and drain service
Water heaters
Sump pumps
Water treatment
Gas lines
Older homes around Medicine Lake and established neighborhoods near central Plymouth may also have several generations of mechanical equipment sharing the same utility area. That makes available space and existing connections important when a water heater, gas line, or other plumbing component needs work. Homes farther west or in managed communities can present a different layout, but the first step is still understanding what is already installed.
Your Friendly Plymouth Neighborhood Team
Plymouth is one of the largest cities in Minnesota. The good news is this means you can always find something to do. For example, if we’re repairing your plumbing, you can take a nature walk at Clifton E. French Regional Park. Or, if we’re installing a new AC, you can go enjoy craft beer
at Luce Line Brewing. Prefer to do something educational? Check out the Plymouth Historical Museum while we take care of your heater.
Neighborhoods We Serve in Plymouth Include:
Southwest Plymouth
Southern Plymouth
Parkers Lake
Medicine Lake / French Park
Top-Notch Home Services Company in Plymouth
Choose Hurlburt whenever you need electrical, plumbing, heating and cooling services. Our team of more than 60 professionals includes professional plumbers and electricians. We also have 65+ years of industry experience, and all installations include a 12-month warranty. We provide high-quality work, and we always put people first.
Are you looking for an electrical, plumbing, or HVAC company in Plymouth? Reach out to our team of experts today!
Recent Jobs and Reviews in Plymouth, MN
Plymouth, MN at a glance
Hurlburt Heating & Plumbing has completed 20 jobs in Plymouth, MN between September 2026 and October 2026.
The most recent job was on October 16, 2026.
Hurlburt Heating & Plumbing has completed 184 jobs in Plymouth, MN in the last 12 months. The first job there was in October 2025.
Job Locations and Reviews
Drew D.Checked in
Diagnosed the in-floor radiant heating system serving the sunroom and found the gas supply to the dedicated gas water heater shut off. Opened the gas supply, relit the pilot, and verified the circulator pump engaged on a call for heat, restoring heat to the space. Also repaired a slow-leaking exterior hose bibb by rebuilding the stem with new washers, lock nuts, and associated fittings; pressure tested the repair with the water restored, confirmed no leaks, and returned the faucet to service.
Plymouth, MN 55442
Jared R.Checked in
Performed maintenance on one approximately 20-year-old furnace, inspecting the thermostat, filter, drain, blower motor, inducer motor, capacitor, electrical wiring, heat exchanger, igniter, and flame sensor, with all components testing within normal parameters, and temperature split verified. Adjusted gas pressure, which would not exceed 2.70" w.c.; CO level could not be tested at this time, so a follow-up visit has been requested. Furnace is operating normally; homeowner also reported the water heater used for in-floor heating is not operating, so a plumber visit will be scheduled.
Plymouth, MN 55442
Moe R.Checked in
Responded to a no-cool call on a 5-year-old Lennox split-system air conditioner found to be low on refrigerant, with a suspected evaporator coil leak covered under manufacturer warranty. Reviewed the leak search and repair process with the homeowners, including the need to run the system to circulate leak-detection dye; since the AC will not be operated for the remainder of the season, the warranty repair was deferred until spring startup.
Plymouth, MN 55446
Roger M.Checked in
Performed a complete furnace tune-up on a 3-year-old unit, including a visual borescope inspection of the heat exchanger and combustion components and a differential pressure check with a dual-port manometer to verify proper gas pressure and airflow. All readings were within normal operating range, no issues or deficiencies were found, and the system was left operating properly.
Plymouth, MN 55447
Roger M.Checked in
Performed a complete seasonal tune-up on a Lennox gas furnace, including inspection of the gas supply line, venting, and electrical connections, and verification of proper operation and safety controls. Confirmed the 16x25x4 media filter is in place and in good condition, and found no frost, rust, or visible damage to the equipment. System is operating normally with no issues or repairs required.
Plymouth, MN 55447
Jarrod S.Checked in
Performed a standard flush on a gas-fired Rheem power-vent tanked water heater to remove sediment buildup from the tank. Little to no sediment or discoloration was present in the discharge, indicating the unit is in good condition. Unit was refilled, returned to service, and tested for proper operation.
Plymouth, MN 55446
Kyle F.Checked in
Responded to a dispatch regarding saturated carpet in basement closet with suspected clogged drain, water heater connection issue, or air conditioner condensation as potential causes. Conducted comprehensive diagnostic inspection of all basement plumbing systems including furnace, air conditioning unit, water heater, water softener, floor drain, and downstairs bathroom fixtures. No active water leaks or drain backups were identified during the inspection. Performed camera scope inspection of the floor drain line, which confirmed the line is currently open and functioning without obstruction. All inspected systems were operating properly at the time of service, and the source of the water saturation could not be definitively determined during this visit. No repair work was performed as no immediate issues were found requiring correction.
Plymouth, MN 55447
Jon W.Checked in
Replaced failed control board under manufacturer parts warranty to restore system operation. Upon testing after board replacement, discovered blower motor had also failed, which was previously undiagnosed due to the non-functional control board preventing system startup. Submitted parts order for blower motor replacement and completed installation of new motor to fully restore HVAC system to proper working condition.
Plymouth, MN 55447
Jarrod S.Checked in
Responded to emergency call for leaking main water line at city meter location in basement. Upon inspection, identified failed main shut-off valves and deteriorated piping connections causing active water intrusion. Additionally assessed existing 50-gallon natural gas power vent water heater, which was determined to be at end of serviceable life with compromised tank integrity and inefficient operation.
Performed complete replacement of main water line shut-off valves at meter connection to restore proper system isolation capability and eliminate leak source. Installed new 50-gallon natural gas power vent water heater with appropriate venting configuration. Connected new unit to existing gas supply line with new gas valve assembly featuring red wheel handle for emergency shut-off accessibility. Installed thermal expansion tank with copper piping connections and pressure relief components to protect system from thermal expansion damage.
Configured all water supply connections using co
Plymouth, MN 55447
Craig M.Checked in
Responded to callback for excessive humidity levels (85%+) following recent system installation. Upon inspection, discovered multiple thermostat configuration errors affecting dehumidification performance: humidity control was disabled, fan speed in dehumidification mode was set incorrectly high, overcool function was turned off, and overcool threshold parameters were maximized in wrong direction. Additionally, found large hole behind thermostat causing inaccurate humidity readings. Corrected all system settings, lowered minimum humidity setpoint to appropriate level, sealed wall penetration behind thermostat, and reviewed proper system operation with homeowner to ensure understanding of dehumidification controls and optimal settings for climate control.
Plymouth, MN 55447
Moe R.Checked in
Responded to perform scheduled boiler tune-up inspection on 47-year-old Bryant residential boiler system. Upon arrival, conducted comprehensive safety and performance evaluation of the heating unit and associated components.
During combustion analysis testing, discovered critical carbon monoxide leakage from both upper and lower heat exchanger seals. Upper seal measured CO levels as high as 50 ppm, while lower seal registered up to 40 ppm at the leak points. Ambient CO levels of 1 ppm were detected in the mechanical room with probe removed from unit during operation, indicating hazardous conditions.
Performed thorough diagnostic assessment to determine root cause of CO leakage. Verified all venting and exhaust pathways for obstructions—found no blockages present. Inspected heat exchanger for plugging and verified proper airflow through combustion chamber. Heat exchanger showed significant age-related wear and deterioration consistent with 47 years of service, though passages remained
Plymouth, MN 55447
Jon W.Checked in
Responded to no heat call on five-year-old residential furnace system. Upon arrival, performed diagnostic testing of electrical components and control systems using digital multimeter to measure voltage and continuity. Inspection revealed failed control board preventing furnace operation. Accessed unit interior, removed access panels, and traced wiring connections to isolate fault to main control board assembly. Documented system configuration and captured images of blower motor assembly, wiring harness, and control board connections for warranty documentation. Submitted parts order request to verify warranty coverage on failed control board and obtain replacement pricing for customer approval before proceeding with repair.
Plymouth, MN 55447
Alton S.Checked in
Completed annual heating maintenance on a one-year-old furnace and humidifier system. Performed comprehensive inspection including scrubbing the flame sensor, checking capacitor, wiring, inducer motor, blower motor, and heat exchanger—all components found in good operating condition. Measured carbon monoxide levels at 6 ppm, within safe parameters. Replaced air filter and humidifier filter, then flushed condensation drain line to restore proper drainage flow. System tested and confirmed ready for winter operation.
Plymouth, MN 55446
Jon W.Checked in
Performed annual fall heating maintenance on one furnace and one gas fireplace. During inspection, discovered failing ignitor and flame sensor, along with a cracked heat exchanger on the back of the right cell near the high limit switch with visible exhaust leakage and carbon monoxide escaping outside the unit during operation. Immediately shut down furnace due to unsafe operating conditions and tagged unit as hazardous. Documented damage with photographs showing heat exchanger deterioration and scheduled furnace replacement estimate.
Plymouth, MN 55446
Roger M.Checked in
Completed annual heating maintenance visit for plan agreement member. Performed comprehensive system tune-up and inspection with all components operating within normal parameters. No deficiencies identified or repairs required at this time.
Plymouth, MN 55447
Jon W.Checked in
Completed comprehensive tune-up and diagnostic evaluation on two residential furnace systems aged 22 and 27 years. Main floor unit (American Standard TUD080B942K4, 80,000 BTU input) showed inducer draft motor drawing elevated amperage indicating imminent failure; all other components including gas valve, ignition system, and safety controls tested within manufacturer specifications with safe CO levels and proper gas pressure. Basement furnace exhibited failing ignitor with weakened performance; remaining components operational and testing properly with safe flue CO readings and correct gas pressure. Both systems remain fully functional with no immediate safety concerns identified.
Plymouth, MN 55447
Lazlo L.Checked in
Responded to service call for 40-gallon natural gas water heater replacement assessment. Inspected existing unit and surrounding installation area in confined space with exposed framing and utility access. Evaluated installation requirements including clearances, venting configuration, and existing copper supply lines. Provided customer with three detailed replacement estimates for standard 40-gallon natural gas tanked water heater installation. Documented existing conditions with photographs showing current infrastructure, pipe routing, and workspace constraints for future reference.
Plymouth, MN 55441
Ryan W.Checked in
Completed kitchen plumbing installations including dishwasher, garbage disposal, faucet, and bar sink. Corrected improperly installed shower valve that protruded excessively into shower area and conflicted with toilet vent placement behind valve location. Secured hot and cold shower supply lines deeper into wall cavity to accommodate tile installation. Cut and installed new wood framing, then properly reinstalled shower valve and shower head at correct depth and positioning to meet code requirements and allow for finished wall installation.
Plymouth, MN 55447
Ali T.Checked in
Completed annual cooling tune-up and inspection on residential AC system. Performed comprehensive diagnostic testing using digital multimeter to verify system performance parameters including temperature differentials and operational readings. During inspection, identified rust present on heat exchanger component requiring monitoring. Verified air filter condition and overall system operation, documenting findings with diagnostic equipment readings and photographic evidence of equipment status.
Plymouth, MN 55447
Fred G.Checked in
Completed combustion analysis on residential furnace system that was previously unable to be finished during recent maintenance visit. Performed comprehensive CO check with digital analyzer, confirming safe operation with no carbon monoxide detected. All readings within manufacturer specifications, system operating safely.
“Mark was very pleasant to work with! He was on time and took care of my plumbing needs efficiently and effectively. I would definitely use him again for any plumbing issues I may have. I have been using Hurlburt for all of my heating, plumbing, and electrical needs and have always been satisfied!”
Alison A.
“Great service! Professionals starting from the first person I spoke to on the phone and finalizing with the person who finished the installation and cleaned up after. Staff explained everything well. Highly recommended!!!”
Jessica F.
"Outstanding service as always! Hurlburt goes above and beyond for their customers. We got scheduled right away, and Shawn did a great job. I will continue to use these guys for everything!!!"
Nicole T.
"Our technician Mike was just awesome. Took the time to show me what he was doing and explained why he was doing it. Gave me an honest evaluation of my situation. You can’t go wrong with Hurlburt and the work ethics of the employees."
Jean C.
Trevor came to service our AC unit. Very happy with his work. Trevor was friendly and knowledgeable, and got our issue fixed quickly. Hurlburt Heating and Plumbing is a great company to work with."
Debbie L.
"Hurlburt has helped us out with both plumbing and HVAC services in the past and have always done a great job. All their technicians, especially Mark, have been kind, professional, and quick with service!"